[ROM][7.1.2] AOKP Nougat with built in sidebar launcher! [tbltexx]

Search This thread

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
bc5288767ecc58bf8713e79c975ea28b.jpg

To God be the glory, my AOKP NOUGAT project finally works!

This is not a dirty unicorn. This is the original unicorn, the AOKP. Now made out of Nougat! That's right, all of the AOKP stuff you love, plus LineageOS, plus a built in side bar, and more! All wrapped up into one! With tons of settings from status bar tweaks to button remaps, it's all here and ready to rumble!

**** This is an UNOFFICIAL ROM. Install at your own risk! ****

You must be on a 6.0.1 Bootloader with a 6.0.1 modem! I suggest if you are unsure, flash stock 6.0.1, then install this ROM!

Downloads :

THE AKLU KERNEL CAN BE DOWNLOADED HERE (OPTIONAL - BUT DOES FIX WIFI HOT SPOT ISSUE) :
https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419

NEW ROM DOWNLOAD:
http://www.mediafire.com/file/9zzsqgbtgvtgq9k/aokp_tbltexx_nougat_unofficial_2017-05-01_1223.zip

OLD Download:
https://www.mediafire.com/download/s29ujxni2lc0smd

Gapps link:
http://opengapps.org/
-Which I personally tested Arm 7.0 Nano.

Data Fix (For T-Mobile phones):
https://forum.xda-developers.com/no...ment/ril-data-fixes-6-0-1-bootloader-t3546110
However, the T-Mobile variant already has it's very own version of this rom in the T-Mobile thread! I did test this however, and it works.


Be sure to follow these installation steps very carefully, as they may be different then what you are used to.

Installation instructions:

-Put your phone on the 6.0.1 Bootloader and Modem
-Download ROM and gapps, and put them on your phone or external storage.
-Reboot into recovery mode - TWRP (I personally installed this using Mickey's 3.0.0-0).
-Backup what you had. (Just to be safe.)
-Wipe. (I personally wipe everything prior to flashing new roms, but at least do the basic wipe.)
-Install Rom.
-Install Gapps. - Optional
- If using the kernel, let the rom boot, then come back to recovery and flash the AKLU kernel.
- If using another variant, let the rom boot, then come back to recovery and flash a data zip.
-Reboot to system and enjoy!


I do not recommend installing superSU on this ROM! SU permission is already built in, and superSU has been causing problems with the rom. Please read the thread for further details.

What works :
Code:
+ Phone calls/receiving
+ Data 2g/3g/LTE
+ Bluetooth
+ WiFi
+ MTP
+ GPS/Glonass
+ S PEN
+ The WiFi hotspot does work with the AKLU kernel.
etc....

What doesn't :
Code:
- The edge panel is not implemented at this time. The screen wraps around the edge.
  But there is an app bar feature under ROM CONTROLS!
- The capacitive buttons work, but do not illuminate.
- The WiFi hotspot does not work with the stock kernel, but does with the AKLU kernel.
- Fingerprint sensor is really flaky. I got it to work once with fingerprint scanner tools to turn on the flashlight, but only once. Most times it will not register.
- I have not found any big errors, fault crashes, or problems yet. Please let me know if you find an issue!

This AOKP N ROM was built for the tbltexx, the International Samsung Galaxy Note Edge. I have not tried this on any other device, but you are welcome to try it AT YOUR OWN RISK. You may need to edit the META-INF updater script to accomplish this. Note, this can flash directly to the T-Mobile variant, but the T-Mobile variant has it's own thread with this rom: https://forum.xda-developers.com/no...evelopment/rom-aokp-nougat-built-bar-t3558263

Code:
Disclaimer: AOKP is not responsible for any damages to your device.
All of my work is completely available for any who wish to use or modify it. I didn't make AOKP, the device trees, or vendor blobs. I simply used and edited existing material. A huge thanks should go to those who actually created this stuff.

AOKP XDA Forum: http://forum.xda-developers.com/aokp
Source Code: https://github.com/AOKP
Official website: http://aokp.co/
Device trees: https://github.com/alaskalinuxuser/

ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.10.40
Based On: LineageOS and PA, and AOSP.

Created 2017-02-16
Last Updated 2017-05-02

Change log:
Code:
20170501
+ Edited camera settings to help with third party apps that use the camera.

20170428
+ Fixed recent button.

20170427
+ Synced with AOKP source!
--> Security update to April 5th, 2017
--> New battery icon options.
--> New powermenu torch option.
--> Long press hotspot tile to go to hotspot settings.
+ Added kexec hardboot to both default and AKLU kernels to allow this to work with multirom.
+ Borrowed from mickey to fix the notification led lights for proper color display.

20170316
+ Synced with AOKP source!
--> Security update to March 5th, 2017
--> Numerous AOKP fixes for the ROM itself. See the change-log under Rom control.
+ Added in possible VOIP fix for voip app problems.

20170302
+ Synced with AOKP source!
--> Merged with Android 7.1.1_r21
--> Added PIE controls
--> Security patches updated to Feb 5, 2017
--> Now FULLY supports OMS/SUBSTRATUM
+ Screenshot issue fixed
+ SDcard read from File Manager fixed[/QUOTE]

20170216: 
-First build release.
 
Last edited:

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
Features and Screenshots!

Features and Screenshots!

- Advanced Reboot
- Omni-Switcher
- Kernel Adiutor

+ Rom Control:

+ App Launchers
- App Circle Bar
- App Side Bar
- Gesture Anywhere

+ General
- cLock settings
- Screenshot settings
- Recents settings
- Wakelock Blocker

+ Hardware Keys
- Backlight control
- Power button options
- Launch vibration control
- Home button controls
- Recents button controls
- Long press options, double tap options
- Kill app back button option
- Volume buttons wake
- Volume button playback controls
- Keyboard cursor controls
- Volume button reorientation
- IME features

+ Lockscreen
- Media Cover art
- Display music visualizer
- Show weather
- Blur background
- Fingerprint auth vibration
- Double tap to sleep (DT2S)
- Disable quick settings
- Show lockscreen clock and date
- Lockscreen notification count

+ Notification Drawer
- Brightness slider
- Brightness icon
- Rows in portrait and landscape modes
- Columns
- Tile Animations
- Advanced data tile
- Smart pulldown
- Quick pulldown

+ Pie Controls
- Pie Style
- Pie targets
- Pie color settings

+ Power Menu
- Animation choices
- Screenshots
- Screenrecord
- Airplane mode
- Sound Panel

+ Sound
- Various sound settings
- Volumn step control

+ Status Bar tweaks
- Network traffic
- Clock style
- Double tap to sleep (DT2S)
- Superuser indicator
- Icon controls
- AOKP logo

+ User interface
- Toast controls
- AOKP animations
- Transparency controls

- Changelog
 

Attachments

  • a.jpg
    a.jpg
    54.5 KB · Views: 7,628
  • b.jpg
    b.jpg
    63.3 KB · Views: 7,185
  • d.png
    d.png
    172.6 KB · Views: 7,229
  • e.jpg
    e.jpg
    75.6 KB · Views: 7,298
  • g.jpg
    g.jpg
    69.1 KB · Views: 7,637
  • f.jpg
    f.jpg
    60.7 KB · Views: 7,448
Last edited:

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
Notes.

A place for rom notes....

Background image:
https://qlfiles.net/2017/01/07/upload-fractal-images/
The background images that I used in this ROM came from the Quiet Learner. You should check out his mathematical artwork, including 3D mandelbox images!

If the screen looks red-ish, check the settings->display->live display options, you may want to turn them off, it is a low light sensitive display option.

Data Zips: T-Mobile users with device model = unknown:

If you are using a N915T (like myself), the fix is very easy!
-Open /system/build.prop in any text editor
-Anywhere in the file, add this line:
Code:
ro.build.model=SM-N915T
Save and exit, then reboot your phone. You can check "about phone" under settings, you should see yourself as SM-N915T, and apps like XDA should report you as Samsung Galaxy Note Edge.


Apps:

Swiftkey Keyboard - This keyboard can be set so the keyboard does not wrap around the screen.
https://play.google.com/store/apps/details?id=com.touchtype.swiftkey

Spen Command - This app cost a few dollars, but enables the Spen to be somewhat smart again, rather than just a pointer stick.
http://www.emandt.net/Android/SPenCommand/Website/

If you find something else that will help other users, please let me know by posting in the thread!
 

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
Hey everyone!
The AKLU kernel is online for the AOKP 7.1.1 Nougat rom! It fixes the WiFi hot spot issue!
https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419

20170217
- Fix WiFi hot spot error for Nougat.
- Overclocked the GPU from 600MHz to 633MHz
- Overclocked the CPU from 2649MHz to 2688MHz
- Added governors: Bioshock, Lionheart, Nightmare, Darkness
- Removed input boost, use cpu boost instead
- Added I/O schedulers: FIOPS, ZEN
 

beany23

Senior Member
Jan 15, 2015
628
485
Hey everyone!
The AKLU kernel is online for the AOKP 7.1.1 Nougat rom! It fixes the WiFi hot spot issue!
https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419

20170217
- Fix WiFi hot spot error for Nougat.
- Overclocked the GPU from 600MHz to 633MHz
- Overclocked the CPU from 2649MHz to 2688MHz
- Added governors: Bioshock, Lionheart, Nightmare, Darkness
- Removed input boost, use cpu boost instead
- Added I/O schedulers: FIOPS, ZEN


When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?
 
  • Like
Reactions: AlaskaLinuxUser

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?

By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.

Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.

As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.

Hi... this ROM is also compatible with the model Verizon, Sprint, US Cellular (SM-N915P, SM-N915V, SM-N915R4)?! Thanks!

Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.

Hi i tested this rom now for a few hours and it runs very smooth. For the moment i did not find any issues.
Thanks for this nougat rom

And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated! :D
 
  • Like
Reactions: Austeno and darazor

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?

By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.

Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.

As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.

Hi... this ROM is also compatible with the model Verizon, Sprint, US Cellular (SM-N915P, SM-N915V, SM-N915R4)?! Thanks!

Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.

Hi i tested this rom now for a few hours and it runs very smooth. For the moment i did not find any issues.
Thanks for this nougat rom

And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated! :D
 

Knickelei

Member
Feb 2, 2015
11
8
Rheinland
I installed the ROM yesterday. I came from the European/German Version MM 6.0 N915FYXXU1DPE1_DBT. I followed the instructions on the first post and had no problems. I installed the AKLU-Kernel, too.

There's no edge and the fingerprint works bad. Finally I'm only working with a PIN. But the ROM is fast, stable, slim and it runs very smooth. I hope, that the development of this ROM goes on.

Next I try the implemented edge-feature and the hint for SPen-using by a third-party app. And perhaps I'll format the sd-card as internal storage. But for that I need a better card.

Thank you very much for this great work. :good:
 

beany23

Senior Member
Jan 15, 2015
628
485
By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.

Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.

As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.



Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.



And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated! :D

So I can build using the guide and it will be the 6.0 kernel source? Or the 7.1 source?
 
Last edited:
  • Like
Reactions: AlaskaLinuxUser

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
I installed the ROM yesterday. I came from the European/German Version MM 6.0 N915FYXXU1DPE1_DBT. I followed the instructions on the first post and had no problems. I installed the AKLU-Kernel, too.

There's no edge and the fingerprint works bad. Finally I'm only working with a PIN. But the ROM is fast, stable, slim and it runs very smooth. I hope, that the development of this ROM goes on.

Next I try the implemented edge-feature and the hint for SPen-using by a third-party app. And perhaps I'll format the sd-card as internal storage. But for that I need a better card.

Thank you very much for this great work. :good:

Thanks for the kind words, I'm glad you like it. The edge is a Samsung propriety function that we cannot use.

So I can build using the guide and it will be the 6.0 kernel source? Or the 7.1 source?

Use the nougat source from my github to build the aklu kernel. I also recommend the 4.8 arm eabi toolchain.
 
  • Like
Reactions: darazor and beany23

Knickelei

Member
Feb 2, 2015
11
8
Rheinland
When the lock screen wake up automatically to show a notification, the display is very dark. Is there a setting to change this?

Thank you

Apropos, the SPenCommand-app from post 1 is very good. Better than the original tool from Samsung itself.

Gesendet von meinem unknown mit Tapatalk
 
  • Like
Reactions: AlaskaLinuxUser

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
When the lock screen wake up automatically to show a notification, the display is very dark. Is there a setting to change this?

Thank you

Apropos, the SPenCommand-app from post 1 is very good. Better than the original tool from Samsung itself.

Gesendet von meinem unknown mit Tapatalk

Yes, I see that too. I am investigating.


can î use this rom on n9150?

I do not know for sure. You can try, but you may need to edit the updater-script.

Hope that helps!
 
  • Like
Reactions: darazor

JeremySS

Senior Member
Dec 14, 2010
199
70
Indianapolis
Loaded up the TMO version and so far is running smooth with the exception of some weirdness around the back and recent apps hw buttons. They seem to be acting properly but are not lighting up. I went into ROM control and tried to adjust. Interestingly when I have the screen open for adjusting time on they do light up, but then go black again after closing the adjustment box. There is also no vibration when hitting those 2 buttons. Im not getting anything useful in the logs that I can see. I tried reflashing but no change in behavior. Any suggestions? Am I the only one seeing this?
 
  • Like
Reactions: AlaskaLinuxUser

AlaskaLinuxUser

Senior Member
Oct 23, 2015
1,946
4,079
Fairbanks
thealaskalinuxuser.wordpress.com
I can confirm, that the lights don't go.

Is the battery drain better with the original kernel from the rom? The AKLU kernel is fast and hungry.
Yes, I also see that only the red led and yellow led are working for notifications. I'll take a look at that later as well. Thanks for the feed back!

As for the kernel, the cm kernel is something I don't use much, so I am not too sure how it is on battery.

I too had a battery drain issue, but when I agent to the battery stats I saw that the phone was waking up all the time. I then realized that my email app, blue mail, was not optimized, nor was my freelab messenger, once I optimized those, the battery life improved. I do agree though, it could be better.

As I am sure you know, your settings, like in kernel adiutor, will have a significant impact on your battery. The default settings are aggressive.
 
  • Like
Reactions: darazor

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    bc5288767ecc58bf8713e79c975ea28b.jpg

    To God be the glory, my AOKP NOUGAT project finally works!

    This is not a dirty unicorn. This is the original unicorn, the AOKP. Now made out of Nougat! That's right, all of the AOKP stuff you love, plus LineageOS, plus a built in side bar, and more! All wrapped up into one! With tons of settings from status bar tweaks to button remaps, it's all here and ready to rumble!

    **** This is an UNOFFICIAL ROM. Install at your own risk! ****

    You must be on a 6.0.1 Bootloader with a 6.0.1 modem! I suggest if you are unsure, flash stock 6.0.1, then install this ROM!

    Downloads :

    THE AKLU KERNEL CAN BE DOWNLOADED HERE (OPTIONAL - BUT DOES FIX WIFI HOT SPOT ISSUE) :
    https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419

    NEW ROM DOWNLOAD:
    http://www.mediafire.com/file/9zzsqgbtgvtgq9k/aokp_tbltexx_nougat_unofficial_2017-05-01_1223.zip

    OLD Download:
    https://www.mediafire.com/download/s29ujxni2lc0smd

    Gapps link:
    http://opengapps.org/
    -Which I personally tested Arm 7.0 Nano.

    Data Fix (For T-Mobile phones):
    https://forum.xda-developers.com/no...ment/ril-data-fixes-6-0-1-bootloader-t3546110
    However, the T-Mobile variant already has it's very own version of this rom in the T-Mobile thread! I did test this however, and it works.


    Be sure to follow these installation steps very carefully, as they may be different then what you are used to.

    Installation instructions:

    -Put your phone on the 6.0.1 Bootloader and Modem
    -Download ROM and gapps, and put them on your phone or external storage.
    -Reboot into recovery mode - TWRP (I personally installed this using Mickey's 3.0.0-0).
    -Backup what you had. (Just to be safe.)
    -Wipe. (I personally wipe everything prior to flashing new roms, but at least do the basic wipe.)
    -Install Rom.
    -Install Gapps. - Optional
    - If using the kernel, let the rom boot, then come back to recovery and flash the AKLU kernel.
    - If using another variant, let the rom boot, then come back to recovery and flash a data zip.
    -Reboot to system and enjoy!


    I do not recommend installing superSU on this ROM! SU permission is already built in, and superSU has been causing problems with the rom. Please read the thread for further details.

    What works :
    Code:
    + Phone calls/receiving
    + Data 2g/3g/LTE
    + Bluetooth
    + WiFi
    + MTP
    + GPS/Glonass
    + S PEN
    + The WiFi hotspot does work with the AKLU kernel.
    etc....

    What doesn't :
    Code:
    - The edge panel is not implemented at this time. The screen wraps around the edge.
      But there is an app bar feature under ROM CONTROLS!
    - The capacitive buttons work, but do not illuminate.
    - The WiFi hotspot does not work with the stock kernel, but does with the AKLU kernel.
    - Fingerprint sensor is really flaky. I got it to work once with fingerprint scanner tools to turn on the flashlight, but only once. Most times it will not register.
    - I have not found any big errors, fault crashes, or problems yet. Please let me know if you find an issue!

    This AOKP N ROM was built for the tbltexx, the International Samsung Galaxy Note Edge. I have not tried this on any other device, but you are welcome to try it AT YOUR OWN RISK. You may need to edit the META-INF updater script to accomplish this. Note, this can flash directly to the T-Mobile variant, but the T-Mobile variant has it's own thread with this rom: https://forum.xda-developers.com/no...evelopment/rom-aokp-nougat-built-bar-t3558263

    Code:
    Disclaimer: AOKP is not responsible for any damages to your device.
    All of my work is completely available for any who wish to use or modify it. I didn't make AOKP, the device trees, or vendor blobs. I simply used and edited existing material. A huge thanks should go to those who actually created this stuff.

    AOKP XDA Forum: http://forum.xda-developers.com/aokp
    Source Code: https://github.com/AOKP
    Official website: http://aokp.co/
    Device trees: https://github.com/alaskalinuxuser/

    ROM OS Version: 7.1.2 Nougat
    ROM Kernel: Linux 3.10.40
    Based On: LineageOS and PA, and AOSP.

    Created 2017-02-16
    Last Updated 2017-05-02

    Change log:
    Code:
    20170501
    + Edited camera settings to help with third party apps that use the camera.
    
    20170428
    + Fixed recent button.
    
    20170427
    + Synced with AOKP source!
    --> Security update to April 5th, 2017
    --> New battery icon options.
    --> New powermenu torch option.
    --> Long press hotspot tile to go to hotspot settings.
    + Added kexec hardboot to both default and AKLU kernels to allow this to work with multirom.
    + Borrowed from mickey to fix the notification led lights for proper color display.
    
    20170316
    + Synced with AOKP source!
    --> Security update to March 5th, 2017
    --> Numerous AOKP fixes for the ROM itself. See the change-log under Rom control.
    + Added in possible VOIP fix for voip app problems.
    
    20170302
    + Synced with AOKP source!
    --> Merged with Android 7.1.1_r21
    --> Added PIE controls
    --> Security patches updated to Feb 5, 2017
    --> Now FULLY supports OMS/SUBSTRATUM
    + Screenshot issue fixed
    + SDcard read from File Manager fixed[/QUOTE]
    
    20170216: 
    -First build release.
    5
    Well guys, I hate to say it, but this is it. I really enjoyed working with the note edge, but now it's time for me to move on.

    I thought the edge would be a really neat phone to work with, and though it was, I never could get used to the "edge" for aosp style ROMs and I'm not a touch-wiz fan.

    I hope that you enjoyed the ROMs and kernel, but I will not be working on them for the note edge any more. I'll be selling my edge.

    I don't plan to close the threads, you are all welcome to use them for discussion or to use any of my work if it is at all useful.

    For now, if you are looking for me you can find me hanging out at the T-mobile S4 and Verizon S5 threads.

    Thank you for your kind comments, thanks button slaps, and feedback. God bless, or, as we say in the Navy, God speed and smooth sailing!

    Sent from my SM-G900V using XDA-Developers Legacy app
    5
    Features and Screenshots!

    Features and Screenshots!

    - Advanced Reboot
    - Omni-Switcher
    - Kernel Adiutor

    + Rom Control:

    + App Launchers
    - App Circle Bar
    - App Side Bar
    - Gesture Anywhere

    + General
    - cLock settings
    - Screenshot settings
    - Recents settings
    - Wakelock Blocker

    + Hardware Keys
    - Backlight control
    - Power button options
    - Launch vibration control
    - Home button controls
    - Recents button controls
    - Long press options, double tap options
    - Kill app back button option
    - Volume buttons wake
    - Volume button playback controls
    - Keyboard cursor controls
    - Volume button reorientation
    - IME features

    + Lockscreen
    - Media Cover art
    - Display music visualizer
    - Show weather
    - Blur background
    - Fingerprint auth vibration
    - Double tap to sleep (DT2S)
    - Disable quick settings
    - Show lockscreen clock and date
    - Lockscreen notification count

    + Notification Drawer
    - Brightness slider
    - Brightness icon
    - Rows in portrait and landscape modes
    - Columns
    - Tile Animations
    - Advanced data tile
    - Smart pulldown
    - Quick pulldown

    + Pie Controls
    - Pie Style
    - Pie targets
    - Pie color settings

    + Power Menu
    - Animation choices
    - Screenshots
    - Screenrecord
    - Airplane mode
    - Sound Panel

    + Sound
    - Various sound settings
    - Volumn step control

    + Status Bar tweaks
    - Network traffic
    - Clock style
    - Double tap to sleep (DT2S)
    - Superuser indicator
    - Icon controls
    - AOKP logo

    + User interface
    - Toast controls
    - AOKP animations
    - Transparency controls

    - Changelog
    5
    When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
    2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?

    By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.

    Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.

    As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.

    Hi... this ROM is also compatible with the model Verizon, Sprint, US Cellular (SM-N915P, SM-N915V, SM-N915R4)?! Thanks!

    Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.

    Hi i tested this rom now for a few hours and it runs very smooth. For the moment i did not find any issues.
    Thanks for this nougat rom

    And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated! :D
    4
    Notes.

    A place for rom notes....

    Background image:
    https://qlfiles.net/2017/01/07/upload-fractal-images/
    The background images that I used in this ROM came from the Quiet Learner. You should check out his mathematical artwork, including 3D mandelbox images!

    If the screen looks red-ish, check the settings->display->live display options, you may want to turn them off, it is a low light sensitive display option.

    Data Zips: T-Mobile users with device model = unknown:

    If you are using a N915T (like myself), the fix is very easy!
    -Open /system/build.prop in any text editor
    -Anywhere in the file, add this line:
    Code:
    ro.build.model=SM-N915T
    Save and exit, then reboot your phone. You can check "about phone" under settings, you should see yourself as SM-N915T, and apps like XDA should report you as Samsung Galaxy Note Edge.


    Apps:

    Swiftkey Keyboard - This keyboard can be set so the keyboard does not wrap around the screen.
    https://play.google.com/store/apps/details?id=com.touchtype.swiftkey

    Spen Command - This app cost a few dollars, but enables the Spen to be somewhat smart again, rather than just a pointer stick.
    http://www.emandt.net/Android/SPenCommand/Website/

    If you find something else that will help other users, please let me know by posting in the thread!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone