• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][7.1.2][AOSP] Android N for MeMOPAD 10 FHD LTE

Search This thread

Tom897

New member
Apr 22, 2017
3
0
Help please.Persist.zip

Does anyone have to download persist.zip from Russian forum?
There is no download in Russian
Thanks.
 

Memopadel

New member
Oct 23, 2016
3
0
ZenUI Feeling

1) Flash ROM
2) Flash NANO Open GApps
3) Flash SuperSU version suggested as OP
4) Boot and configure your Google account
4 BIS) Install from Play Store ZenUI Launcher ...
5) Flash the file I will attach later (I'm writing from tab): ...
6) Boot tablet and reinstall by APK you find into the zip file gallery and ime (keyboard)
7) Enjoy

-> Sorry, the file you requested is not available.

Could you please make the file available for download again?
Thank you!
 

C_zerone

Member
Dec 31, 2014
5
0
Thank you! @yattodettaman

My me302kl tablet have a NEW LIFE!

I do the processes below
1. Install the ROM
2. Install the bean Gapps(Because I use the Open Gapps, I always get the error about setup.
I get the messenge that "setup wizard have been stoped" )
3. install the SuperSu
4. flash the fix overlay and reboot
5. Perfect tablet I get!

However, there is a little problem disturbing me.
When I want to use the camera, I CAN'T Open either Main camera or the front camera with google camera software and other Apps.

Have any solution about it?

THANK YOU!
 

f465gt

Senior Member
Jun 14, 2018
222
36
near Stuttgart
Thanks for the instructions! My ME302KL was just laying around since it did not respond to touch inputs properly and was quite unstable. Now it works perfect!

Just one thing. What is Overlay Fix and Init.d Enabler for? What does it fix? Nothing seems to be broken though.
 

HorrorBest

Member
Jan 17, 2021
22
0
Ik This thread is prob dead but I wanna post anyways. How do You find this in your tablet ?? **ME302KL** where can I find it ??
 

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    Android N for the MeMOPad FHD 10 4G - ME302KL

    n-android.jpg


    Code:
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    Talking about Overclocking:
    Overclocking (or underclocking) is optional. The installer lets you choose the maximum frequency. You can set the maximum frequency individually for each CPU core in the installer. Whatever frequencies you chose in the installer will be set at boot for each CPU. Not all devices can handle overclocking. The stock maximum CPU frequency is 1512MHz. I recommend a mild overclock, like 1728MHz for daily use. Clocking higher creates heat and wastes battery for very little performance gain. (FROM ELEMENTALX POST)



    talking about CPU voltages
    The installer allows you to choose from several undervolting options. These automatically undervolt the lowest frequency (384MHz) where the CPU spends most of its time. The voltages for other frequencies are assigned based on the PVS bin of your phone. CPU voltages are fully customisable with apps such Kernel Tuner or Trickster Mod, but I recommend leaving these other voltages as-is unless you are prepared to do a lot of testing. Be careful, lowering voltages can cause instability. Generally, having reboots while the phone is asleep or other weird problems is a sign that your minimum voltage is too low. The minimum voltage allowed is 700mV. (FROM ELEMENTALX POST)
    Max CPU Freqs avaiable (0ver stok 1512000) : 1620000, 1728000, 1836000, 1890000, 1944000, 2052000, 2160000, 2214000
    Max GPU Freqs avaiable (Over stock 400): 450, 477, 491, 504, 531, 555, 585

    talking about GPU Governor
    In wizard you can choose also the simple governor.


    Installation
    You have to unlock tablet with asus app.
    You have to use SevenMaxs TWRP RECOVERY for Me302kl



    1. Download the ROM from the link below
    2. Download GAPPS (OpenGapps Micro tested)
    3. Transfer the zip files to your SD card
    4. Reboot to recovery mode
    Note: You Must use TWRP recovery
    5. Optional: Do nandroid backup
    6. Wipe data / Factory Reset
    7. Install the rom zip
    8. Install GAPPS
    9. Install SuperSU to root the Tablet
    10. flash Overlay Fix and Init.d Enabler https://www.androidfilehost.com/?fid=529152257862728608
    11. Reboot to system
    Enjoy Android 7.x !

    The ROM is not rooted, so you have to download and install SuperSU with TWRP. You have to use SuperSU
    To Set Overclock/undervolt Parameters:
    1) go again in TWRP and flash the ElementalX for ME302KL Zipfile
    2) follow the wizard to set the parameters
    3) reboot the tablet.
    4) Use EX Kernel Manager fron google play or Kernel Adiutor to fine tuning of these parameters.

    -----------------------------------------------------------------------------------------------------------------------------------------------------------


    Download 7.1.2 r12 Releasehttps://www.androidfilehost.com/?fid=817550096634776292
    with ExKernel 6.08 inside. https://www.androidfilehost.com/?fid=889764386195906335
    ATTENTION !!!!
    This is a new release wit a new kind of ramdisk. System is adapted to it too

    Don't install older release of Ex Kernel (before 6.08) or Glitch Kernel (before r566) on this rom if you don't want a bootloop...


    Download TWRP Recovery by SevenMaxs : http://forum.xda-developers.com/showpost.php?p=68444210&postcount=44

    To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
    Then connect to the tablet with adb:
    Code:
    adb shell
    su
    dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p25

    Reboot into recovery VOL+ AND POWER

    -----------------------------------------------------------------------------------------------------------------------------------------------------------

    Source

    Check out the KERNEL Source available on https://github.com/yatto/ElementalX
    The rom is the Nexus 7 AOSP 7.1.2 Nougat by @DevSwift1 and @zaclimon and @followmsi without some libs : system/lib/keystore.msm8960.so and others and with the /system/vendor/lib/files from Me302kl 4.2.2 ROM

    Feel free to submit any fixes, Just remember to give proper credits when using other people's source.


    Credits
    @DevSwift1
    @zaclimon
    @SevenMaxs
    @followmsi

    -----------------------------------------------------------------------------------------------------------------------------------------------------------

    XDA:DevDB Information
    Android Nougat AOSP 7.1.2 for Me302kl, ROM for the Asus MeMO Pad FDH 10 LTE


    ROM OS Version: 7.x
    ROM Kernel: Linux 3.4.x

    Version Information
    Status: Stable
    8
    When i have time. :) :)

    Oops... I had time same days ago
    New ROM :
    Android 7.1

    https://www.sendspace.com/file/31pziv
    ;)
    7
    UPDATE AOSP 7.1.2 r2
    https://www.androidfilehost.com/?fid=817550096634761494
    1) Dirty flash (Flash with TWRP without wipe data).
    2) Reinstall Gapps
    3) You have to root the rom again....
    If you like, install ElementalX 6.06 boot.img https://www.androidfilehost.com/?fid=457095661767153687
    Thanks to @followmsi (all credits to him)
    https%3A%2F%2Fuploads.tapatalk-cdn.com%2F20170410%2F0b28083e37ba2812c6232edfaaa68625.jpg
    6
    UPDATE
    Android AOSP 7.1.1 R28 for DUMA
    https://www.androidfilehost.com/?fid=457095661767145294

    This is only an update, so there is no kernel boot image. You have to flash with TWRP without wipe data, but you have to reflash open gapps.
    All the credits and many thanks to @followmsi to keep update this amazing rom.
    5
    New boot image.
    - some little fix
    - compiled with SaberMod toolchain
    ?
    Remember that after you flashed this file with twrp, you have to root the tablet again ...