[ROM][7.1.2][AOSPA] ParanoidAndroid 7.1.3 | Celox [06-16-17]

[bryan2894]

NOTE:
Follow, ParanoidAndroid on Google+ for updates.
​

NOTE: You must virtually repartition your device, otherwise you cannot install this ROM! See the 2nd post for details.

Downloads:

AOSPA 7+ (Nougat)​

ROM | Magisk (96f8efc) [Root] | OpenGApps

Nano GApps or Pico recommended
​

CREDITS

Google/AOSP, TeamChopsticks, CyanogenMod, AOSPA team, XDA, sultanxda

LINKS:
Github
AOSPA G+ Community

​

​

XDA:DevDB Information
[AOSPA] ParanoidAndroid, ROM for the AT&T Samsung Galaxy S II Skyrocket SGH-I727

Contributors
bryan2894
Source Code: http://github.com/AOSPA

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest Radio & Recovery
Based On: AOSP

Version Information
Status: Stable
Current Stable Version: 6.0.3
Stable Release Date: 2016-09-13

Created 2014-02-18
Last Updated 2017-06-16

 

[bryan2894]

Installation Instructions

NOTE: If you repartitioned your phone using a pit file, its recommended that you flash back the original unmodified pit to take full advantage of the increased space.

Official TWRP (v2.8.6-0) recovery
Hercules: https://forum.xda-developers.com/showpost.php?p=59709111&postcount=1273
Skyrocket: https://forum.xda-developers.com/showpost.php?p=59751649&postcount=1116

Virtual Partition TWRP recovery
Hercules: https://www.androidfilehost.com/?fid=313042859668276543
Skyrocket: https://www.androidfilehost.com/?fid=313042859668276544

From another non-virtual partitioned ROM:

1. Make sure you have the latest OFFICIAL TWRP installed.
2. Backup current ROM if desired
3. Back up EVERYTHING on your internal SD card to your computer (the internal SD card WILL BE ERASED in the next step).
4. In TWRP, go to Wipe -> Advanced Wipe -> check Internal Storage -> press on "Repair or Change File System" -> press on "Change File System" -> press on "EXT4", and then swipe to start formatting the internal SD card. This can take up to a minute.
5. Wipe Data, Cache and System.
6. Copy the newest version of my TWRP recovery to your device and flash it.
7. After that is finished, go back to the main menu, then go to Reboot and press on Recovery.
8. Once the device has rebooted back into TWRP recovery, goto mount then uncheck and recheck data.
9. Copy and flash the new ROM and your GApps package to your device and flash
10. Reboot system
11. Connect your phone to your computer and copy back your backed-up internal SD card data to the internal SD card.
12. Repartitioning is completed. Enjoy your 8GB of additional app storage space.

From CM13.0, CM12.1 or another virtual partitioned ROM:

1. Flash ROM and GApps (at the same time)
2. Reboot

Updating to a newer version:

• Just flash ROM and reboot.

 

[bryan2894]

Known Issues / Bugs:

Not Working:

• Camera
• Extended reboot menu

 

[bryan2894]

Older builds

These builds are no longer supported. They're of final status and should be stable.

AOSPA 6+ (Marshmallow)
ROM | SuperSU | OpenGApps

AOSPA 5+ (Lollipop)
ROM | TK GApps (Lollipop) | SuperSU

AOSPA 4+ (KitKat)
ROM | GApps
​

 

[bzzybfrm313]

First. Will give it a whirl thanks

 

[wolfsbay]

ive been wating for paranoid to get ported, this is amazing thankyou!!

 

[pilotgav]

Same build as from the other thread?

Sent from my SGH-I727 using Tapatalk

 

[skyrocketeer]

Unofficial, I'm assuming?
it's ported from the Hercules shown in your sig.

 

[bryan2894]

Unofficial, I'm assuming?
it's ported from the Hercules shown in your sig.

Nope. Official built from source

Sent from my SGH-T989 using Tapatalk

 

[bryan2894]

AOSPA v4.1-beta

AOSPA v4.1-beta is up. Be aware that there is no PIE yet (for non-nexus devices). The code is still being worked on.

 

[hellfreezover]

Is there a reason that quiet hours were removed?

 

[bryan2894]

Is there a reason that quiet hours were removed?

I believe it was removed because the code was considered hacky. The code is going to be reworked.

 

[_Jax_]

Cool stuff!

Thanks for bringing it to us as well Bryan :good::good:

 

[hydeah]

Thanks, it seems this is one of the most recent roms.
It says -beta on title, does this mean this is in testing stage or is it stable?

Is there a CWM or TWRP version requirement? I have twrp_2.6.3.0_kitkat_skyrocket_vincom currently installed, can I use this to flash this rom?
Thanks!

 

[bryan2894]

Thanks, it seems this is one of the most recent roms.
It says -beta on title, does this mean this is in testing stage or is it stable?

Is there a CWM or TWRP version requirement? I have twrp_2.6.3.0_kitkat_skyrocket_vincom currently installed, can I use this to flash this rom?
Thanks!

It's beta because other AOSPA features aren't available yet. Otherwise, the ROM is pretty much stable.

As for recovery, TWRP 2.6.10 is recommended. But test and see if that recovery works.

Sent from my SGH-T989 using Tapatalk

 

[hydeah]

It's beta because other AOSPA features aren't available yet. Otherwise, the ROM is pretty much stable.

As for recovery, TWRP 2.6.10 is recommended. But test and see if that recovery works.

Sent from my SGH-T989 using Tapatalk

Thanks, I ended up switching to CWM and flashing CM10.2 for the time being just to get it running.

 

[OnlySilver]

got a changelog for today?

 

[bryan2894]

got a changelog for today?

Check the first page.

Sent from my SGH-T989 using Tapatalk

 

[advanttage]

Big up to the devs behind this one, PA is by far the best Android distro I've found, I was scared for a bit after KK was released, didn't see much about PA + KK for skyrocket. I actually prefer the 2.99 4.12 over all the PA released for skyrocket to date, but looking forward to this one!

Update: most stable KK rom on skyrocket so far. Even though it's pretty well stock aosp, I'll rock it. Build.prop for dpi setting (just so I could handle it)

Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app

 

[bryan2894]

AOSPA v4.2-beta1

Care to have some?

(For info on how to enable visit here: http://forum.xda-developers.com/showthread.php?p=50793238)