[ROM][7.1.2][OpenKirin's RROS v5.8.5 For Honor 8 Pro ][ Update 24/10/2017 ]

[sachazufferey]

Alright, then i will wait and not go back to stock

I'll try to reinstall EMUI B122 on my device and then I'll check what is wrong on Installation Instruction .

Thanks guys for your feedback

I'll let you to know very soon ...

I have a emmc device, it can be the problem... Did you flash the supersu zip?

Did a test with/without supersu : same result (and I have the error during vendor flashing too)

Thanks

 

[surdu_petru]

I have a emmc device, it can be the problem... Did you flash the supersu zip?

Did a test with/without supersu : same result (and I have the error during vendor flashing too)

Thanks

The red line into TWRP after vendor was flashed ( E:unknown command []] ) is not a issue - So please do not take it into account

Ohh... thanks about your info about "emmc" storage - the issue seems to be from here as I have a UFS device !


EDIT :

Our dear developer @OldDroid already added a stuff in his TWRP to check Internal Storage partition, and he has already told me to use this stuff on RROS kernel ... but it seems I forgot ... Sorry guys ... I'll add right now and RROS will be re-uploaded !

 

[sachazufferey]

The red line into TWRP after vendor was flashed ( E:unknown command []] ) is not a issue - So please do not take it into account

Ohh... thanks about your info about "emmc" storage - the issue seems to be from here as I have a UFS device !

I think eMMC/UFS is the center of the problem because all the install process went fine, it comes when booting.

Avec plaisir

 

[adriansticoid]

@surdu_petru, is HWC also disabled for this ROM?

Sent from my Honor 8 using XDA Labs

 

[surdu_petru]

@surdu_petru, is HWC also disabled for this ROM?

Sent from my Honor 8 using XDA Labs

Yes, but as there is no code source from Huawei/Honor for this stuff we can't properly enabled ... also does not seem to affect in a very serious way any custom ROMs - indeed a properly HWC implementation could help us a bit - but for now this lack does not seem to be noticeable

I think eMMC/UFS is the center of the problem because all the install process went fine, it comes when booting.

Avec plaisir

Please, can you confirm if after flashed this boot.zip via TWRP device successfully boot on RROS 7.1.2 ? Thanks !

This zip must be installed after all steps from Installation Instruction on the OP was already done !

 

[sachazufferey]

Yes, but as there is no code source from Huawei/Honor for this stuff we can't properly enabled ... also does not seem to affect in a very serious way any custom ROMs - indeed a properly HWC implementation could help us a bit - but for now this lack does not seem to be noticeable



Please, can you confirm if after flashed this boot.zip via TWRP device successfully boot on RROS 7.1.2 ? Thanks !

This zip must be installed after all steps from Installation Instruction on the OP was already done !

Quelle vitesse!

I'm doing it right now.

 

[adriansticoid]

Yes, but as there is no code source from Huawei/Honor for this stuff we can't properly enabled ... also does not seem to affect in a very serious way any custom ROMs - indeed a properly HWC implementation could help us a bit - but for now this lack does not seem to be noticeable

But you are using the recently released Honor 8 Pro sources right?

Sent from my Honor 8 using XDA Labs

 

[sachazufferey]

Yes, but as there is no code source from Huawei/Honor for this stuff we can't properly enabled ... also does not seem to affect in a very serious way any custom ROMs - indeed a properly HWC implementation could help us a bit - but for now this lack does not seem to be noticeable



Please, can you confirm if after flashed this boot.zip via TWRP device successfully boot on RROS 7.1.2 ? Thanks !

This zip must be installed after all steps from Installation Instruction on the OP was already done !

I flashed it after the ROM and Open GApps but my H8pro still stuck on "Your device is booting now" :crying:

 

[surdu_petru]

But you are using the recently released Honor 8 Pro sources right?

Sent from my Honor 8 using XDA Labs

Yes, you can check OpenKirin github

Battery Performance profile :

Battery Balanced profile :

All without HWC enabled !

I flashed it after the ROM and Open GApps but my H8pro still stuck on "Your device is booting now" :crying:

Please, install this new boot.zip via TWRP ( right now - don't need to follow again the OP Installation ) and post here :

* adb shell getprop > getprop.txt

* adb reboot device

* adb shell logcat > log.txt

( please apply the next command in about 30 seconds )

* adb reboot device

* adb shell ls -l dev/block/

Thanks !

 

[adriansticoid]

Yes, you can check OpenKirin github

Battery Performance profile :



Battery Balanced profile :



All without HWC enabled !
Thanks !

Goddamn awesome results. We can almost forget about HWC now.

 

[sachazufferey]

Yes, you can check OpenKirin github

Battery Performance profile :

Battery Balanced profile :

All without HWC enabled !



Please, install this new boot.zip via TWRP ( right now - don't need to follow again the OP Installation ) and post here :





( please apply the next command in about 30 seconds )





Thanks !

No luck with the new boot.zip...

I will restore original EMUI and send you the adb commands result

 

[smouker]

Flashed the boot.zip and created the logs... the log.txt says logs are switched off... do i need to enable something?

 

[sachazufferey]

Flashed the boot.zip and created the logs... the log.txt says logs are switched off... do i need to enable something?

And your device boot? Or still freeze during boot?

 

[smouker]

And your device boot? Or still freeze during boot?

nope... those logs were taken in twrp
im restoring EMUI now

 

[surdu_petru]

Please, all the logs must be taken after boot.zip was flashed and device tried to boot on RROS 7.1.2 and NOT on TWRP nor on stock EMUI !

Thanks !

Also would be good if you can also post this info :

* adb shell ls -l dev/block/platform/hi_mci.0/by-name/

 

[smouker]

Please, all the logs must be taken after boot.zip was flashed and device tried to boot on RROS 7.1.2 and NOT on TWRP nor on stock EMUI !

Thanks !

Also would be good if you can also post this info :

* adb shell ls -l dev/block/platform/hi_mci.0/by-name/

On bootscreen adb commands were not able to run, so I had to take those logs in TWRP right after i tried to boot.

 

[surdu_petru]

On bootscreen adb commands were not able to run, so I had to take those logs in TWRP right after i tried to boot.

Yes, adb is here with the last boot.zip ... If you do not have a functional adb, it looks like you made a mistake somewhere

EDIT :

Just checked once again and YES ... you are right, thanks

BTW, the issue was fixed so a new version of RROS will be uploaded !

 

[sachazufferey]

On bootscreen adb commands were not able to run, so I had to take those logs in TWRP right after i tried to boot.

Exactly the same problem here! Did you bought it in Switzerland too ? (Same model, I think)

 

[smouker]

Exactly the same problem here! Did you bought it in Switzerland too ? (Same model, I think)

yes its the same model

 

[surdu_petru]

The OP was just updated with a new version of RROS 7.1.2 - this time should be working well for the both devices : UFS & EMMC