• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][7.1.2]Tesla-N_GZR[UNOFFICIAL] Mi pad1 | Shield blobs

Search This thread

G.S.T

Senior Member
May 13, 2017
162
117
GROUND ZERO ROMS-TESLA N
https%3A%2F%2Fimg.xda-cdn.com%2FMoF4sa1VGMqir4C8i3nhBiVSv9o%3D%2Fhttp%253A%252F%252Fbit.ly%252F2hOmWAa


DISCLAIMER
**I am not responsible for anything that happen to your device.You are doing this at your own risk**

About the ROM :
Tesla is GZ-AOSP based with full OMS support and has handpicked useful features.

BUGS
All of them that you find in Los shield blobs
Anything more,report with LOGS

INSTRUCTIONS:angel:
Same as latest Los14.1
Needs TOSforPSCI 0.1
Flash SmokeR24.1 kernel after flashing rom

ROM&Kernel Folder https://www.androidfilehost.com/?w=files&flid=295872

:cool:Please hit thanks if you like my work:good:

XDA:DevDB Information
Tesla, ROM for the Xiaomi Mi Pad

Contributors
G.S.T, Artemka2008
Source Code: [url]https://github.com/TeslaRom-N[/URL]

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Shield blobs

Version Information
Status: Testing

Created 2019-06-24
Last Updated 2019-06-23
 
Last edited:

G.S.T

Senior Member
May 13, 2017
162
117
Screenies
 

Attachments

  • Screenshot_20190623-150926.jpg
    Screenshot_20190623-150926.jpg
    107.3 KB · Views: 2,155
  • Screenshot_20190623-151031.png
    Screenshot_20190623-151031.png
    193.6 KB · Views: 2,134

ash009

Senior Member
Jan 3, 2013
371
44
Mumbai
Hello so i was trying to update this rom from an old lineage 15.1 os June 2018 build, here's what i did

- Flashed shieldblobs
-flashed Tos ( As i flashed it in recovery itself, i was prompted for option whether to flash on boot partition or recovery partition, and i selected boot partition)
-after that i flashed a twrp recovery 30.09.2018
-restarted the device to recovery
-wiped system, cache, data
-successfully flashed this rom
-flashed open gapps pico 7.1
-wiped dalvik cache and restarted to system
- Mi pad is dead lol at first i thought it's battery might be drained but it's been an hour and it does not boot into any recovery or fastboot mode. Any suggestion?

After several tries was able to boot to recovery and flashed the smoke kernel, the rom works now thank you :good::silly:
 
Last edited:

ash009

Senior Member
Jan 3, 2013
371
44
Mumbai
Ok so the device shuts off when i lock the screen and i have hard time booting the rom/system, but it easily boots into recovery.. I'm guessing the problem has to do with me flashing a wrong tos version or something? Can someone clarify? Should i flash tos 0.1 in recovery partition? I had previously flashed it in boot partition.. Awaiting reply thanks
 
Last edited:

vickdu31

Senior Member
May 5, 2012
315
107
Ok so the device shuts off when i lock the screen and i have hard time booting the rom/system, but it easily boots into recovery.. I'm guessing the problem has to do with me flashing a wrong tos version or something? Can someone clarify? Should i flash tos 0.1 in recovery partition? I had previously flashed it in boot partition.. Awaiting reply thanks

You should use this guideline, flash using fastboot commands, partition name is tos
https://forum.xda-developers.com/mi-pad/development/lineageos-14-1-t3850621
 
  • Like
Reactions: ash009

reflecx

Member
Jun 1, 2007
27
7
The setup wizard keeps crashing after bootup, and I am unable to use the tablet as I can't get out of the wizard screen. I went through the flashing procedure twice, with the same results. LOS 14.1 works for me.
 

kongkee

New member
Nov 2, 2017
1
0
The setup wizard keeps crashing after bootup, and I am unable to use the tablet as I can't get out of the wizard screen. I went through the flashing procedure twice, with the same results. LOS 14.1 works for me.
I have the same problem.
After I install "BootBlobs-SHIELD-mocha", I can enter the "Android 7.12" system. Yon can try again.

---------- Post added at 04:02 PM ---------- Previous post was at 03:59 PM ----------

I have the same problem.
After I install "BootBlobs-SHIELD-mocha", I can enter the "Android 7.12" system. Yon can try again.
Just only install the "BootBlobs-SHIELD-mocha" one more. You can try again.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    GROUND ZERO ROMS-TESLA N
    https%3A%2F%2Fimg.xda-cdn.com%2FMoF4sa1VGMqir4C8i3nhBiVSv9o%3D%2Fhttp%253A%252F%252Fbit.ly%252F2hOmWAa


    DISCLAIMER
    **I am not responsible for anything that happen to your device.You are doing this at your own risk**

    About the ROM :
    Tesla is GZ-AOSP based with full OMS support and has handpicked useful features.

    BUGS
    All of them that you find in Los shield blobs
    Anything more,report with LOGS

    INSTRUCTIONS:angel:
    Same as latest Los14.1
    Needs TOSforPSCI 0.1
    Flash SmokeR24.1 kernel after flashing rom

    ROM&Kernel Folder https://www.androidfilehost.com/?w=files&flid=295872

    :cool:Please hit thanks if you like my work:good:

    XDA:DevDB Information
    Tesla, ROM for the Xiaomi Mi Pad

    Contributors
    G.S.T, Artemka2008
    Source Code: [url]https://github.com/TeslaRom-N[/URL]

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.0.x
    ROM Firmware Required: Shield blobs

    Version Information
    Status: Testing

    Created 2019-06-24
    Last Updated 2019-06-23
    1
    Ok so the device shuts off when i lock the screen and i have hard time booting the rom/system, but it easily boots into recovery.. I'm guessing the problem has to do with me flashing a wrong tos version or something? Can someone clarify? Should i flash tos 0.1 in recovery partition? I had previously flashed it in boot partition.. Awaiting reply thanks

    You should use this guideline, flash using fastboot commands, partition name is tos
    https://forum.xda-developers.com/mi-pad/development/lineageos-14-1-t3850621