[ROM][7.1][LineageOS(CM)14.1 and CM13 ][UnOfficial] (Nougat) [tate]

transi1 · Feb 14, 2016

CM13.0 (Marshmallow) unofficial builds for the TATE

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.

Code:

#include <std_disclaimer.h>
/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at any of us for messing up your device, we will laugh at you.
 * Collectively, and at the same time.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.

download:
new: https://www.mediafire.com/folder/u7sb7p10ik7v0/tate
old:https://www.mediafire.com/folder/5a97vbv93k24n/tate
old:https://www.mediafire.com/folder/w9nh7oyabwvww/tate

backup before flash, gapps need for upgrade, don`t flash SuperSU
deep sleep fixed

http://opengapps.org/ (arm, 6.0)
Kernel auditor - Low memory killer - Very aggressive

If you install Gapps after the ROM has been booted for the first time you either need to wipe data and reboot. Without this Gapps will crash constantly. This is due to the new permissions-system in M.

bluetooth lte-version fix: https://forum.xda-developers.com/ki...elp/kindle-fire-hd-8-9-bluetooth-rom-t3315904

alexander_32 · Feb 15, 2016

Great, now it's time to bring TWRP 3.0.0.0 for better results.

xWolf13 · Feb 15, 2016

alexander_32 said:
Great, now it's time to bring TWRP 3.0.0.0 for better results.

TWRP 3 is not really a necessity. People have been flashing MM numerous times with 2.8.x.x builds for a while now without trouble.

transi1 · Feb 15, 2016

build 20160215 (backup before flash, gaaps need for upgrade): http://www.mediafire.com/download/pj2994j9p358tit/cm-13.0-20160214-UNOFFICIAL-tate.zip

alexander_32 · Feb 15, 2016

xWolf13 said:
TWRP 3 is not really a necessity. People have been flashing MM numerous times with 2.8.x.x builds for a while now without trouble.

Look at TWRP changelog:
https://twrp.me/site/update/2016/02/05/twrp-3.0.0-0-released.html
It has sense!

I'll try to compile it later (I don't know when).

monster1612 · Feb 16, 2016

alexander_32 said:
Look at TWRP changelog:
https://twrp.me/site/update/2016/02/05/twrp-3.0.0-0-released.html
It has sense!

I'll try to compile it later (I don't know when).

If you do plan on compiling, use transi's github repos (found here). I have a prebuilt manifest with the repos already configured that you can place in the hidden .repo folder of your Android build environment if you need it up on my GitHub here.
(I recommended transi's repos because they're more up to date, and there's also that custom Marshmallow boot logo.

)

Sent from my Amazon Jem using XDA Labs

alexander_32 · Feb 16, 2016

monster1612 said:
If you do plan on compiling, use transi's github repos (found here). I have a prebuilt manifest with the repos already configured that you can place in the hidden .repo folder of your Android build environment if you need it up on my GitHub here.
(I recommended transi's repos because they're more up to date, and there's also that custom Marshmallow boot logo. )

Sent from my Amazon Jem using XDA Labs

Thank you very much :good::good::good:

itouchables · Feb 16, 2016

@transi1 Great rom! Very fluid. Only issue is the lack of deepsleep. Do you have an idea what might be causing it?

Also I flashed the ROM with Twerp 2.7.x.x so Twerp 3.0 is not required (but if you guys build it,i'll still take it

)

GMattZ · Feb 17, 2016

Thanks for bringing CM13!

njliuxtao · Feb 18, 2016

hope this rom to be official

transi1 · Feb 18, 2016

build 20160218 (backup before flash, gapps need for upgrade, don`t flash SuperSU): http://www.mediafire.com/download/j18vp0uo1mca0qa/cm-13.0-20160218-UNOFFICIAL-tate.zip
deep sleep fixed

thecoolster · Feb 19, 2016

Screenshots please??

r3t3ch · Feb 19, 2016

transi1 said:
build 20160218 (backup before flash, gapps need for upgrade, don`t flash SuperSU): http://www.mediafire.com/download/j18vp0uo1mca0qa/cm-13.0-20160218-UNOFFICIAL-tate.zip
deep sleep fixed

My battery thanks you. From what I can tell, everything that was working in cm12.1 also works in cm13. Along with very aggressive memory killer recommended from OP, I'm also using max cpu freq 1500MHz with performance governor and deadline scheduler with 512kB read-ahead in kernel adiutor and the performance is good. In cm12 I remember several crashes with the same cpu oc but for now it seems stable.

Jrhoop · Feb 20, 2016

How do I get root for cm13? I dare not flash SuperSU.

Sent from my Amazon Tate using Tapatalk

vasolini · Feb 21, 2016

Jrhoop said:
How do I get root for cm13? I dare not flash SuperSU.

Sent from my Amazon Tate using Tapatalk

LOL! Definitely don't flash supersu! Just got my kindle back up from soft bricking it that way.

r3t3ch · Feb 21, 2016

Jrhoop said:
How do I get root for cm13? I dare not flash SuperSU.

Isn't the risk of flashing stuff half the fun? If you like flashing stuff on tate you should pick up a fastboot cable as good practice, you can grab one from china for <$4.

Anyway, supersu works just fine, you just have to make sure it doesn't install in systemless mode by default which patches boot incorrectly.

Simply pass this line in TWRP (advanced>terminal) before flashing supersu zip:

Code:

echo SYSTEMLESS=false>>/data/.supersu

You'll see it say "System mode" in the output from flashing if you've done it correctly. If not, make sure you don't reboot yet, and just re flash a working rom zip to restore boot.img (like cm13 from OP).

Jrhoop · Feb 21, 2016

r3t3ch said:
Isn't the risk of flashing stuff half the fun? If you like flashing stuff on tate you should pick up a fastboot cable as good practice, you can grab one from china for <$4.

Anyway, supersu works just fine, you just have to make sure it doesn't install in systemless mode by default which patches boot incorrectly.

Simply pass this line in TWRP (advanced>terminal) before flashing supersu zip:

Code:

echo SYSTEMLESS=false>>/data/.supersu

You'll see it say "System mode" in the output from flashing if you've done it correctly. If not, make sure you don't reboot yet, and just re flash a working rom zip to restore boot.img (like cm13 from OP).

Yes I guess, but usually not sensible to do the opposite of what the developer said. I have a fast boot cable, actually two as I thought I had lost one. My attempt at flashing twrp last week using flasify didn't go so all. Anyway fixed that up and the kindle lives on.

I'm on philz recovery and not twrp but I'm guessing the instructions are fairly similar?

Sent from my Amazon Tate using Tapatalk

r3t3ch · Feb 21, 2016

Jrhoop said:
Yes I guess, but usually not sensible to do the opposite of what the developer said. I have a fast boot cable, actually two as I thought I had lost one. My attempt at flashing twrp last week using flasify didn't go so all. Anyway fixed that up and the kindle lives on.

I'm on philz recovery and not twrp but I'm guessing the instructions are fairly similar?

If you can enter fastboot you have nothing to fear. TWRP is the only recovery that is consistently updated and is highly recommended over philz/cwm. Download TWRP 2.8.7.0 and extract the img from the zip.

I've never been a fan of flashing tools from within android. It's much simpler to just go into fastboot and use:

Code:

fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img

Maromi · Feb 21, 2016

You don't need to flash SuperSU. Enable dev mode then select dev settings and change the root setting

miztah1999z · Feb 23, 2016

Maromi said:
You don't need to flash SuperSU. Enable dev mode then select dev settings and change the root setting

Hey what rom are you running on the KFHD?

[ROM][7.1][LineageOS(CM)14.1 and CM13 ][UnOfficial] (Nougat) [tate]

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

New member

Senior Member

Senior Member

r3t3ch

Guest

Senior Member

Senior Member

r3t3ch

Guest

Senior Member

r3t3ch

Guest

Senior Member

Senior Member

Similar threads

Top Liked Posts