• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [ 8.0.0 | 8.1.0 ] Official madOS - Jiayu S3 [MT6752]

Search This thread


New member
Sep 21, 2021
How to install a madOS_8.1.0_s3_h560_20190722 rom on jiayu s3 with extreme rom installed? In extreme rom already has TWRP!


Senior Member
How to install a madOS_8.1.0_s3_h560_20190722 rom on jiayu s3 with extreme rom installed? In extreme rom already has TWRP!

check the 1st post!
you have to follow exactly the steps :

  • Boot to the new TWRP recovery
  • full Wipes (dont come crying if you didn't .. ;p )
  • Install rom (optionally following by GAPPS if you use them)
  • Reboot System

    DO NOT: Flash any rooting zips (SuperSU or Magisk) on the first flash, together with rom
  • Like
Reactions: zodramos


Feb 21, 2010
I am trying to install new twrp so i can install the rom afterwords. I tried twice, once via the previous twrp and once via sp flash tools. Both times the result is that when i boot to the new recovery it shows a screen with cracking colours like a broken screen would. What's the prob?
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 63

    This is a Official Build of madOS ( based on AOSP 8.1.0 Oreo ) for Jiayu S3 (Adv./Basic/Pro) with MTK 6752 SoC

    madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.

     * Your warranty is now void.
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.

    Installation Instructions:
    • Download ROM from M.A.D. Facebook
      OR via xda DevDB
    • Download madOS Unofficial OpenGapps nano or pico from Download Page
      (We had built, pico and nano 8.1.0 GAPPS only )
    • Backup
    • Flash new mandatory new Oreo 8.1.0 TWRP (available on downloads)
    • Boot to the new TWRP recovery
    • full Wipes (dont come crying if you didn't .. ;p )
    • Install rom (optionally following by GAPPS if you use them)
    • Reboot System

      DO NOT: Flash any rooting zips (SuperSU or Magisk) on the first flash, together with rom

    • RIL (Calls /SMS, Data connection, etc)
    • Wifi
    • Bluetooth (calls, media, file transfer, etc)
    • FM Radio
    • All Sensors
    • Lights; HW Keys
    • Both storages & MTP
    • HW de/encoding
    • Camera (photos only)
    • GPS & aGPS
    • Audio
    • NFC ( available only on the advance/PRO versions)
    • madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)

    Not working:
    • Native Video Recording
      ---> However works just fine with camera apps that use SW de/en coding (i.e.: Footej Camera available at PLAY)

    XDA:DevDB Information
    [ROM] [ 8.0.0 | 8.1.0 ] Official madOS - Jiayu S3 [MT6752], ROM for the JiaYu S3

    superdragonpt, DerTeufel1980, fire855
    Source Code: https://github.com/MediatekAndroidDevelopers

    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: Oreo TWRP / LP layout
    Based On: madOS

    Version Information
    Status: Stable
    Current Stable Version: 1
    Stable Release Date: 2017-11-18

    Created 2017-11-18
    Last Updated 2017-12-24
    [Stable] Build [8.1.0] 20171224

    • First Release of Oreo 8.1.0
    • madOS version: 2.1 (O 8.1.0 )
    • Patch Level: 8.1.0 [OPM1] 2017-12-05,

    Between the new Oreo 8.1.0 & madOS bug fixs & device fixs , there is an huge changelog,
    ... so im narrowing this to bare minimum this time

    main changes:

    • All mad extras stuff is now fixed (fastcharge/ weather/ sensors calibration, performance settings, etc, etc)
    • Theme engine:
      This started as an feature from AOSPA on Nougat (and has been depricated ever since... )
      * We forward port to Oreo 8.0.0, and now to 8.1.0
      * We extended theme engine to per-apps (currently madLauncher; messaging, etc)
      * And added way too many fixs on top of it
    • exfat and ntfs are now properly supported
    • Bluetooth Calls fixed
    • New Sensors HAL
    • New RIL
    • Playback fixed (Youtube, whatsApp, etc)

    ---> ETC

    *New TWRP for 8.1.0 is required

    Since there's still no Official OpenGapps for 8.1.0
    ... we had built them for ya

    --> Check The Download Section ...

    --> Check FAQ as Well

    MERRY XMAS !!!!!!!
    And don't worry, I'm back to s3, been around him the past week, as well as DerTeufel, there's some upstream to fix that's all, then we can have an updated release

    So...just relax :p
    Hi all
    New build is up

    [Stable] Build [8.1.0] 20190722

    • Fixed critical bug where device would enter in infinite bootloop to twrp
    • secure lock screen improvements
    • Media codec improvement
    • RIL ( telephony) improvements
    • increase Magisk compatibility
    • General clean up

    Full wipes / clean installation is strongly recommended



    Do make an FULL Backup of your internal sd , etc

    ( don't blame me if you don't )

    [Stable] Build [8.1.0] 20180417

    • Android 8.1.0 release 20
    • Patch level April 2018
    • madOS version: 2.1.3

    • Doze / Ambient settings:

    Hand-Wave Gesture
    ambient lockscreen weather, etc

    • New hardware settings (some functions are WIP for 6752)
    • Custom header image provider improvements
    • powermenu: cleanup and fix
    • expanded desktop settings
    • visualizer settings
    • increase default maximum password length
    • option to toggle torch by longpressing power button (with screen off)

    • Optimize multithread installation for apps
    • Removed Chromium in favor of Jelly
    (to allow future costumizations, also way less space)

    • JNINativeMethod improvemensts
    • HWCAdapter Improvements ( Google you suck!)
    • Tight up security by requiring unlocking to access tiles
    • hide sensitive information while locked by default
    • Bring back less notification sounds
    • Weather update & fixs
    • dual-sim ringtone support
    • Setting: increasing ringtone
    • Settings: unlink notification volume is back
    • Settings : Option to enable searchpanel, including Navigation Ring Targets
    • OMS: fixs , upstream
    • Disable persistent Mobile data by default
    • AppOps: is back
    • screenrecord is here
    • Slim Recents: Fixed & updated to v3.0
    • smartwake fixs
    • fling and velocity settingsSettings fixs
    • poor man battery style tweaks
    • carrierlable settings fixs
    • searchpanel: properly implement switches
    • Settings : Slimified CM Navigation Ring Targets
    • Fix up secure lockscreen (pattern, pin, etc)
    • Keyguard: Forward port lockscreen quick unlock
    • Secure Settings: Option to scramble pin layout on unlocking

    • Quick settings revamped:
    Quick settings background: allow changing alpha
    new features

    • New usb settings:

    deny_new_usb setting
    usb configuration
    USB default config

    • colorengine:
    colorengine: fix tinting of unruly dashboard icons
    colorengine: fix themed conditions and suggestions
    color engine: add adv settings fragment
    color engine per-apps extended ( messaging, madlauncher, etc)
    wallpaper based theme switch
    other stuff

    • AndroidRuntime crashs fixs, etc
    • madOS: Our cookie is finnaly here !!!
    • Add support for page theme color to WebView and WebChromeClient
    • New rebuilt modem baseband ( hybrid ) feedback is welcome
    • Bluetooth fixs
    • NFC: rebuilt proprietary mtk blobs from upstream
    • Ril improvements
    • many other stuff...

    • TWRP:

    Updated to v 3.2.1-0
    Fixed native format
    many other improvements

    Twrp will be auto-updated during the rom flashing

    edit: rom's up