[ROM] [8.0] [OFFICIAL] [CRGB] [ODIN FLASHABLE] For Galaxy S8+ [G955F/FD] [08.09.2018]

[priscillaahoward120495]

I have downloaded Odin from somewhere

I downloaded Samsung Odin flash tool from https://odindownload.com/how-to-use-odin/. Can I trust this application? I did not report errors but I could not find the compatible firmware file for my Samsung Galaxy J7. I have no idea about flashing or flash tools. Can someone directly advise me to flash my device and please offer me any download link for downloading the correct firmware?

 

[Ruturaj Kadam]

I downloaded Samsung Odin flash tool from https://odindownload.com/how-to-use-odin/. Can I trust this application? I did not report errors but I could not find the compatible firmware file for my Samsung Galaxy J7. I have no idea about flashing or flash tools. Can someone directly advise me to flash my device and please offer me any download link for downloading the correct firmware?

Sorry but you're in the wrong forums. Will provide you help via pm.

 

[Baltrau]

Question regarding S8+

Thank you for the link, I have a question though.

I made a huge mistake by flashing TWRP and SuperSu on my S8+, and voided the warranty and blew the e-fuse. Then I could not get any of the banking apps to work with the S8+ because of the SuperSu root, so I unrooted and wiped the phone to proceed with the installation of Magisk, which can not be installed because the ROM was modified, according to the logs of TWRP.

So my question is, when I am trying to revert to stock by flashing this ROM with Odin I get an error after "cm.bin". Is this due to the e-fuse?

Sorry for the question here, but I tried everything. Your input would be really helpful. :good:

 

[psychonavigator]

Is there a newer version of this? Can't install because sw version is too old.

 

[Fly-n-High]

deleted......

 

[0n6k3]

Can I use this rom to flash G955N (korea version) ?

 

[dinos87]

S8 Plus 955f Sanpdragon

Ive added this post in the Q&A but hope ill have better luck here..

Is there a version available for the snapdragon please.?

Im on Oreo, can i go back to an older firmware? if so any EE 955f stock firmware..

Thanks Dean

 

[Ahmad2k6]

Odin Flashable Android 8.0.0 Oreo Stock Firmware.

Only for Exynos G955F and G955FD variants. For Galaxy S8 visit here - https://forum.xda-developers.com/galaxy-s8/development/rom-galaxy-s8-t3749171

Instructions -
1. Extract zip.
2. Open Prince Comsy Odin and place AP, BL, CP, and HOME_CSC.
3. Start and wait for the device to reboot.
4. Done!

Note - Normal Odin versions will not support. Using Prince Comsy Odin is compulsory!

Downloads -
Official Oreo Odin Flashable - https://drive.google.com/open?id=1ajVHPYAZpkc4plY9Dx3o8C0b0e3zqRKN

Prince Comsy Odin - https://drive.google.com/open?id=1enVG5a_ocyjhRlta8AX_0b7LLoHWciVU

Installation Video - [you

tube]LX_LtKBeSDQ[/youtube]

If anyone is facing the reboot issue due to which Samsung rolled back the update. Please report by posting down below.

Credits -
@murtaza02 for his guide - https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555

Press the thanks button if you want to:silly:

Can i use these file to update to oreo. My current version is G955FXXU1AQJ1.. please see attach image

 

[GugaBarrera]

Hi, any way that I can recognize my device on my Mac? since I run it with Wine, but it does not detect the device

 

[Ruturaj Kadam]

New Indian firmware CRGB uploaded! Check OP for updated link.

 

[Callattic]

Does this work for UK S8 Plus was on official BTU

Odin Flashable Android 8.0.0 Oreo Stock Firmware.

Only for Exynos G955F and G955FD variants. For Galaxy S8 visit here - https://forum.xda-developers.com/galaxy-s8/development/rom-galaxy-s8-t3749171

Instructions -
1. Extract zip.
2. Open Odin 3.13.1 and place AP, BL, CP, and HOME_CSC/CSC.
3. Start and wait for the device to reboot.
4. Done!

Note - Use Odin 3.13.1 only for new firmware.

Downloads -
Official Oreo Odin Flashable CRGB - https://drive.google.com/open?id=13gQ_ILNiMbLmVIIJ2sBXvN5OxayUKZSE

Odin 3.13.1 - https://drive.google.com/open?id=19a2IW8SOFIUy7sDxZQTDo1YcnbXFFEXd

Installation Video -

Credits -
@murtaza02 for his guide - https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555

Press the thanks button if you want to:silly:

So I failed at rooting a s8 plus which is virgin uk btu, now I am trying to find the same firmware, I manged to flash a firmware but it had tk wifi service etc which was no there before and also in the settings there is 2 battery settings what firmware do I need?

 

[hackerjj22]

Kernel rev. Check Fail Device 3 Binary 2

Hi, does anybody have this error: Kernel rev. Check Fail Device 3 Binary 2

Odin 3.13
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin engine v(ID:3.1301)..
<ID:0/015> File analysis..
<ID:0/015> Total Binary size: 5529 M
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> NAND Write Start!!
<ID:0/015> SingleDownload.
<ID:0/015> boot.img
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I try to flash this 3 FW versions:
S8+ Official Oreo CRGB Firmware 07.09.2018
SM-G955F_1_20180904010814_39o648ohci_fac
SM-G955F_1_20180904043214_2afttpa4az_fac

---------------------------------------------------------------------------------
Update: I cannot reproduce the issue of the Kernel rev. I tried in another computer and the result continue SW Rev. CHECK FAIL (BOOTLOADER) DEVICE: 4 BINARY: 3

 

[pakino2004]

Hi, does anybody have this error: Kernel rev. Check Fail Device 3 Binary 2

Odin 3.13
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin engine v(ID:3.1301)..
<ID:0/015> File analysis..
<ID:0/015> Total Binary size: 5529 M
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> NAND Write Start!!
<ID:0/015> SingleDownload.
<ID:0/015> boot.img
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I try to flash this 3 FW versions:
S8+ Official Oreo CRGB Firmware 07.09.2018
SM-G955F_1_20180904010814_39o648ohci_fac
SM-G955F_1_20180904043214_2afttpa4az_fac

---------------------------------------------------------------------------------
Update: I cannot reproduce the issue of the Kernel rev. I tried in another computer and the result continue SW Rev. CHECK FAIL (BOOTLOADER) DEVICE: 4 BINARY: 3

You need exactly the same firmware as your already installed bootloader on your mobile. What ist the last installed bootloader? That's the crux

U can find more about binary in search function in xda and s8
Sent from my Galaxy S8+ using XDA Labs

 

[hackerjj22]

You need exactly the same firmware as your already installed bootloader on your mobile. What is the last installed bootloader? That's the crux

U can find more about binary in search function in xda and s8
Sent from my Galaxy S8+ using XDA Labs

Thank you for the response,
I do not know, the last correct FW flashed is this one: BL_G955FXXU3CRGH_CL14023573_QB19093111_REV00_user_low_ship.tar.md5. After this, the device starts correctly but get an OTA update, and that is the problem. I do not get the details of the new version. I get this definition, Device 4 = current bootloader version on phone.Binary 3 = bootloader I am trying to flash. So, using this BL_G955FXXU4CRI5_CL14315050_QB19732162_REV00_user_low_ship.tar. The 4 before the CRI5 is the BL help me to boots correctly again.

Thank you for your help!

 

[pakino2004]

Thank you for the response,
I do not know, the last correct FW flashed is this one: BL_G955FXXU3CRGH_CL14023573_QB19093111_REV00_user_low_ship.tar.md5. After this, the device starts correctly but get an OTA update, and that is the problem. I do not get the details of the new version. I get this definition, Device 4 = current bootloader version on phone.Binary 3 = bootloader I am trying to flash. So, using this BL_G955FXXU4CRI5_CL14315050_QB19732162_REV00_user_low_ship.tar. The 4 before the CRI5 is the BL help me to boots correctly again.

Thank you for your help!

Sorry.... No idea

Sent from my Galaxy S8+ using XDA Labs

 

[nick191]

Flashing Failed !

Right now I am on custom rom (LightROM) (TeamExyKings). I tried two different stock ROM but both of them failed.
Here is a list of things I have tried so far.

1.Different Odin
2.Different System
3.Run as admin
4.Formatting the phone
5.Different ports of the pc

This is the last log that I have got!
Someone please help...

<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


Thank you.

 

[negative_silent]

I have the SM-G955F.

I flashed TWRP using the instructions on here and everything worked perfectly fine. I even booted back into the stock OS - however, the Magisk app was not there.

I was going to boot back into TWRP when I got the message "Only official released binaries are allowed to be flashed" and went into a bootloop.

Then I followed the instructions to flash the stock firmware back on to my S8+, but it failed. Can someone point me in the right direction please?

I used Odin3_v3.13.1. I have attached 2 pictures to show the error.

 

[gentr]

I have the SM-G955F.

I flashed TWRP using the instructions on here and everything worked perfectly fine. I even booted back into the stock OS - however, the Magisk app was not there.

I was going to boot back into TWRP when I got the message "Only official released binaries are allowed to be flashed" and went into a bootloop.

Then I followed the instructions to flash the stock firmware back on to my S8+, but it failed. Can someone point me in the right direction please?

I used Odin3_v3.13.1. I have attached 2 pictures to show the error.

Use the latest firmware with November patch security

 

[negative_silent]

Use the latest firmware with November patch security

Thank you for the answer!

Is there a particular November patch security firmware that I should flash? I cannot find my region (U.S.A.) or carrier (AT&T). Is there another country or carrier that I can flash that will work with my network provider?

For example, can I flash U.K. (Vodafone) since its on ver 4 firmware and uses GSM - regardless of region and carrier?

 

[gentr]

Thank you for the answer!

Is there a particular November patch security firmware that I should flash? I cannot find my region (U.S.A.) or carrier (AT&T). Is there another country or carrier that I can flash that will work with my network provider?

For example, can I flash U.K. (Vodafone) since its on ver 4 firmware and uses GSM - regardless of region and carrier?

What s8 plus version you have F or FD