• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][8.1.0][20200224][UNOFFICIAL] AospExtended V5.8 | Xiaomi Mi Pad 1 | Shield Blobs

Search This thread

Identity77

Senior Member
May 11, 2017
71
4
Lost my tap to wake functionality. Only tap to sleep. I did Flash the new tos and recovery. I also notice that tap to wake also works on recovery in previous version.
 
Last edited:

famimon

Member
Nov 5, 2013
5
0
San Francisco
Thank you for the amazing work with this rom!

The last release seems to have a bug with deep sleep, I can't make it to wake up and have to force restart it by long pressing the power button, is it something you are working on or should I go back to the previous release, that worked great!
 

famimon

Member
Nov 5, 2013
5
0
San Francisco
Thank you for the amazing work with this rom!

The last release seems to have a bug with deep sleep, I can't make it to wake up and have to force restart it by long pressing the power button, is it something you are working on or should I go back to the previous release, that worked great!

I have installed again using LOS15.1 instructions and skipped installing the blobs file altogether, it seems to work fine now, thank you for this fantastic rom!
 

amenlo9

Member
Jun 10, 2009
47
3
Redmi Note 10
Installation after 2018/11
-> flash tos.img for psci 0.1 and recovery from this thread

My Mipad currently is Aosp extended andorid 7.1
Do i need to flash tos.img before proceed to flash twrp and new rom?
 

dylansmith

Senior Member
Jan 23, 2012
380
11
I followed everything to a T, and it successfully started on the Google setup page. However, I was unable to select language or simply click START. I know it didn't crash because there's a visual response when i click vision settings.

Help??
 

dylansmith

Senior Member
Jan 23, 2012
380
11
I just solved the touchscreen problem, but there is now another problem. After less than 5 minutes of screen off, it refuses to turn on later and I have to restart for it to work. The issue is that the reproducible. Any fix?
 

Anirudh Kartik

Senior Member
For people facing touch screen issue, flash the touch screen hotfix which is given in the LOS15.1 thread. That will fix the issue. The November 2018 build is pretty good, it had a inbuilt screen recorder and lots of customisations.
To pass CTS profile on magisk, flash magisk hide props module and busy box. After flashing this,you can spoof another device's fingerprint, for example I have used the Google pixel 3 XL's fingerprint as my own and now CTS profile passes fine.
Instructions are given on the module itself!
People who's screen are shutting of when tab is idle haven't flashed the TOS 0.1 img. Once you flash this you will not have any issues.
 
  • Like
Reactions: Arsenious
Feb 25, 2018
5
1
Hello! Everything except the LED indicator works on the latest build from 03/11/2020, when the tablet is turned off and connected to the charger! Personally, I have no problems with sound, unlike the standard Los 15.1
 
  • Like
Reactions: karshadum

Ram_Wig_Oyt

Senior Member
Jul 28, 2016
53
7
Xiaomi Mi Pad
Xiaomi Mi A1
Problem with gps or location. Able to give permissions to other apps, but gps or location is not working. It's showing in the status bar that location is turned on. But it's not working. Any fix for that please.
 

shavir Afroz

Senior Member
Dec 25, 2012
107
76
Kanpur
the latest build is damn smooth compared to any custom rom made till date, it is the OREO AEX by @twu2 . I play tegra exclusive games on this rom and its a beast. amazing. thanku
 

shavir Afroz

Senior Member
Dec 25, 2012
107
76
Kanpur
I am currently on latest 3/10 build with only one problem, that is of ghost touches.
The touch screen starts to register multiple touches when i am actually using a single finger.
Though the bug resolves after a reboot, it feels very annoying as it happens everytime.
Can you make a fix for kernel regarding this? @twu2 ? @Artemka2008 has a fix for his LOS 15.1 but that kernel hotfix is based on old kernel.

Referring to this hotfix

https://androidfilehost.com/?fid=11410963190603886503
 

renzion0510

New member
Dec 31, 2012
4
0
Netflix and Video Video Playback

This is by far the best rom for Mocha. Kudos to the dev team.

I mostly use the tab for media consumption. I came from L0S 14 and sideloaded Netflix there and it works perfectly as expected. I can't make it work with this rom though and it kind of defeats the purpose of this media tab. I do have Youtube working and playing movie files are A-OK, but not having netflix is a bummer. Anyone has a way to sideload netflix for this rom or has alternatives?

Also Video Playback on Youtube, facebook and on Browsers do glitch sometimes. It does the green/grey flickering. Any solutions you have for this issue?
 
I just solved the touchscreen problem, but there is now another problem. After less than 5 minutes of screen off, it refuses to turn on later and I have to restart for it to work. The issue is that the reproducible. Any fix?

How did you make the touchscreen work? Would be great if you could share your solution because this looks like a great ROM. After flashing the ROM my pad's touchscreen stopped working and the only way I could interact with it was through adb. I did flash the touch hot fix from the LOS 15.1 thread but it didn't help at all.

All the Shield-based ROMs I've tried have the same issue on my tablet. Stock blob ROMs don't have any touch problems.

However on all ROMs the navigation buttons below the screen DO work.

My pad's touchscreen controller chip is Chipone ICNT8952AN.
 
Last edited:
Nov 4, 2008
12
4
How did you make the touchscreen work? Would be great if you could share your solution because this looks like a great ROM. After flashing the ROM my pad's touchscreen stopped working and the only way I could interact with it was through adb. I did flash the touch hot fix from the LOS 15.1 thread but it didn't help at all.

All the Shield-based ROMs I've tried have the same issue on my tablet. Stock blob ROMs don't have any touch problems.

However on all ROMs the navigation buttons below the screen DO work.

My pad's touchscreen controller chip is Chipone ICNT8952AN.

Maybe your touchscreen is not stock. Only a few ROM can adapt, unfortunately I can't remember which.

UPDATED: Just found the ROM, a user also face the same issue as you, SHIELD-BLOBS not support third party screen. https://forum.xda-developers.com/mi-pad/development/unofficial-lineageos-14-1-xiami-mipad-t3557616
 
Last edited:
  • Like
Reactions: liu-shuyuan

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    aexlogo.png

    Smoothness of AOSP with awesome Extensions.
    AOSP Extended is an AOSP based rom which provides stock UI/UX with various customisations features along with the Substratum theme engine. The project has been made by cherry-picking various commits from various other projects. Being based on AOSP it provides a smooth and lag-free experience out of the box. We will constantly try to add more features and make it even better in future updates. A ROM by a user, for a user. #StayAOSP #ExtendYourDevice #BeExtended


    Information

    -> This ROM is for the Mi Pad 1 (codename: mocha) only. Please do not try it on other devices.
    -> This ROM is based on @Artemka2008's sources. Full credit to him for his work on them


    Bug
    Same as Oreo LOS based on shield blobs:
    • Camera is broken

    bugs for this rom:
    • tell me if you find it


    Installation after 2018/11

    -> flash tos.img for psci 0.1 and recovery from this thread


    Installation

    -> change active system to system1
    -> merge system partition
    -> flash BootBlobs-SHIELD-mocha.zip
    -> flash twrp-3.2.1-0-mocha-shield-20180419.img or twrp-3.2.1-0-mocha-shield-multirom-20180419.img (multirom support) as recovery (not boot), then reboot to recovery (press vol+ while rebooting)
    -> flash multirom-20180403-v33x-UNOFFICIAL-mocha.zip if you need multirom.
    -> flash ROM
    -> flash GAPPS ARM
    -> flash SuperSU or Magisk
    -> reboot


    Sources

    Device
    Kernel
    Vendor


    Credits

    @highwaystar_ru
    @Artemka2008
    @DbIm4pda


    Download

    AFH folder



    XDA:DevDB Information
    AospExtended Oreo for mocha (shield blobs), ROM for the Xiaomi Mi Pad

    Contributors
    twu2
    Source Code: https://github.com/AospExtended

    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 3.10.x
    Based On: AOSP

    Version Information
    Status: Alpha
    Beta Release Date: 2020-02-24

    Created 2018-04-19
    Last Updated 2020-02-26
    7
    Changelog

    20200224-0619:
    • fix OMX (Video Hardware Decoder)

    20181109-0524:
    • sync source to 8.1.0_r50 (include 2018-11-05 security patch)
    • change kernel to SmokeR24.1-V3.5 (need tos.img for psci 0.1)
    • add ChargeTile

    20180906-1134:
    • sync source to 8.1.0_r46 (include 2018-09-05 security patch)

    20180812-1130:
    • sync source to 8.1.0_r43 (include 2018-08-05 security patch)
    • change kernel to SmokeR24.1-V3.2

    20180708-1452:
    • sync source to 8.1.0_r36 (include 2018-07-05 security patch)
    • disable zram support
    • add libxml2.so (for Dolby Atmos Oreo)
    • disable selinux deny_unknown

    20180607-1249:
    • sync source to 8.1.0_r30 (include 2018-06-05 security patch)
    • disable NTFS kernel support (revert back to ntfs-3g)
    • reload profile after reboot in PerformanceProfilesTile
    • disable all hardware encoder/decoder

    20180509-0659:
    • sync source to 8.1.0_r26
    3
    Issue resolved

    My mipad got hanged in the twrp recovery. Please help.

    I tried changing the recovery, didn't help.

    i tried flashing fastboot rom . But no use.

    please help.

    Thanks in advance.

    THE FOLLOWING IS THE SOLUTION... FOUND IN MIUI FORUM... THANK YOU...

    Here is the step by step solution of how to flash the original blob

    STEPS
    1. First Download " BootBlobs-STOCK-mocha.zip " from the thread : http://en.miui.com/thread-1009337-1-1.html

    scroll down through the tread you will find the zip..

    2. Now extract the zip file ...
    3. Now install the mitool .. Do not install the new version as it will not properly work for mi pad.. So download from here
    https://drive.google.com/file/d/0B16P57gCKUMycUh2cGh2empCdkk/view?usp=docslist_api and install it.. Credit goes to http://en.miui.com/thread-394331-1-1.html .. You will also find the tool in the thread..

    4. after installing the mitool ..

    copy 3 files ie.

    BLOB
    Recovery.img
    Tos.img

    which have been extracted from "BootBlobs-STOCK-mocha.zip" to C:\Program Files (x86)\Xiaomi\MiPhone\Google\Android

    5. After While in the C:\Program Files (x86)\Xiaomi\MiPhone\Google\Android folder, hold down the left Shift key on your keyboard and right click inside this folder and then select Open command window here.

    6. Now use the command

    fastboot flash staging blob
    fastboot flash recovery recovery.img
    fastboot flash tos tos.img
    fastboot reboot

    MI pad will reboot back and now you can flash anything..
    Hope you enjoy...
    1
    AEX 7.1, shield blobs or stock blobs? Can you share the link of the rom/ thread? And is camera working in it?
    Runs on shield blobs.
    Camera doesn't work
    1
    AEX 7.1, shield blobs or stock blobs? Can you share the link of the rom/ thread? And is camera working in it?
    That "normal version" is about youtube and ROM is AEX 7.1 Shield Blob and its from the same developer twu2 of 8.1 Shield Blobs