[ROM][8.1.0][A2017X][unofficial] crDROID v4.7.2

[raystef66]

​

JUST FOR FUN...no more no less...​

Proud to present my first compiled build of crDROID 8.1.0 :cyclops:

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
Features:

Click for feature list : https://github.com/crdroidandroid/crdroid_features/blob/8.1/README.mkdn

Always take a proper backup of your running device !
Upgrading from earlier version of crDroid: The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.

Installation:

0. unlocked, suited twrp, oreo bootstack of your choice...you know the drill
1. Copy crDroid zip, 8.1.0 gapps zip and Combifix v3.1 to your device
2. Boot into twrp recovery
3. Wipe cache, system, & data (or just cache & system for a dirty flash) or wipe including vendor (treble, format data)
4. Flash ROM
5. Flash gapps
5a Reboot and setup phone
6. Flash Magisk 18.0 and MagiskHidePropsConfig in 1 take with CombiFix3.1 to pass SafetyNet
7. Reboot and enjoy !


Build : A2017X crDROID 8.1.0

GAPPS: https://opengapps.org/
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

KERNEL SOURCE: https://github.com/LineageOS/android_kernel_zte_msm8996

XDAevDB Information : crDroid 8.1.0, ROM for Axon7

Contributors
@raystef66
Credits to :
@kevte89!
@SaintZ93
@king1990


Source Code: https://github.com/crdroidandroid

ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Unlocked Bootloader, Latest TWRP Recovery
Based On: LineageOS device, vendor, kernel

Version Information : 8.1.0 v4.7.2
Status: Pure & Stable
Sec, Patches : 2018-12-05

Created : 2019.01.26
Last Updated : 2019.01.26

 

[raystef66]

reserved

 

[joaocandeias]

Thanks!

 

[nays_pl]

Thanks, Downloading in progress (;

 

[Predatorhaze]

New rom,still no working dolby atmos

 

[kevte89!]

Good work

 

[tron1]

New rom,still no working dolby atmos

Mi-mi-mi-mi

 

[Predatorhaze]

Mi-mi-mi-mi

mi mi mi it is.No one will use this.
Axon 7 without dolby is mi mi

 

[tron1]

mi mi mi it is.No one will use this.
Axon 7 without dolby is mi mi

This is a new creation just for you. It's a pronounced slow and quiet mi.

 

[SaintZ93]

mi mi mi it is.No one will use this.
Axon 7 without dolby is mi mi

Boo hoo, complain complain. Thats all you ever do. Dont be ruining roms and kernels with your negativity... Why dont you learn to dev and fix dolby yourself. Prove us wrong.

 

[kevte89!]

New rom,still no working dolby atmos

This is not a discussion thread to solve her Dolby problem. It's about Raystef66 of his crdroid Rome, build Dolby yourself or wait for the time to come...

 

[Druboo666]

is this supported by OMS??

 

[[armitage]]

Really great work. Thanks so much for this.
Just one question...
Is the fix you posted for passing Safety Net still working?
Flashed both via the Aroma installer and just passed the basic integrity.

 

[raystef66]

is this supported by OMS??

Tested like Substratum - pitch black theme f.e. and it's working nicely

Really great work. Thanks so much for this.
Just one question...
Is the fix you posted for passing Safety Net still working.
Flashed both via the Aroma installer and just passed the basic integrity.

Thnx !
It should and I tested it on this rom too with success.
Use the combifix v3.1 after you have succesfully flashed ROM zip+gapps. Reboot into twrp and run the combifix and flash Magisk 18.0 AND the safetynet fix in one take. Reboot and done

 

[[armitage]]

Basically did that except for the reboot after flashing rom zip and gapps.
I know that I could uninstall magisk to flash it again, but should I now uninstall the Safety Net fix as well and just flash it again?
Would that do any good?

 

[raystef66]

Basically did that except for the reboot after flashing rom zip and gapps.
I know that I could uninstall magisk to flash it again, but should I now uninstall the Safety Net fix as well and just flash it again?
Would that do any good?

Yeah, you should flash rom+gapps in one take, boot into rom and reboot for Magisk18+fix.

If you see MagiskHidePropsConfig in modules, just untick and delete, reboot into twrp, mount system and vendor, run the Combifix again and just tap the Safeynet Fix and reboot.
I did it multiple times and there was no problem at all.
So try it again. If a no go uninstall Magisk, reboot into twrp, mount system and vendor, run Combi and flash magisk18 and SN fix in one take and reboot.

 

[zombie.king]

MagiskHide Props Config didn't work for me but module named SafetyPatch works fine.

 

[[armitage]]

Yeah, you should flash rom+gapps in one take, boot into rom and reboot for Magisk18+fix.

If you see MagiskHidePropsConfig in modules, just untick and delete, reboot into twrp, mount system and vendor, run the Combifix again and just tap the Safeynet Fix and reboot.
I did it multiple times and there was no problem at all.
So try it again. If a no go uninstall Magisk, reboot into twrp, mount system and vendor, run Combi and flash magisk18 and SN fix in one take and reboot.

Thanks so much for the help.
Went back into recovery, mounted system and vendor and flashed the fix again. before it didn't appear in modules now it does and both checks are fine.
Thanks again.

 

[BaamAlex]

mi mi mi it is.No one will use this.
Axon 7 without dolby is mi mi

Do not be so ungrateful. The Dev will certainly do its best to fix the problem in the future. Just be glad that the Axon 7 still enjoys such a right to exist.

But btw i will test this thing.

 

[atakan33]

deleted