• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [ 8.1.0 ] Official madOS - Wiko Fever (and clones) [MT6753]

Search This thread


Senior Member
Aug 21, 2016
Thanks for this write up! I have MadOS installed successfully on my Blu Life One X using the installed guide. I installed from stock MM up to this with little to no issues. Performance is better than on the stock rom for sure! Used Pico Gapps for lightweight install.

The only thing I cannot get to work that well is the Google Assistant. Any ideas?

Google assistant works fine...
Install and update Google app
Then go to settings > App and notifications > Advanced > Default apps > Assist & voice input > change it to google

---------- Post added at 04:13 AM ---------- Previous post was at 04:12 AM ----------

Keyboard swipe to type is working on Google keyboard...


Senior Member
Sep 12, 2003
Texas, USA and Toronto,Canada
Flashed to the latest version madOS_8.1.0_fever_20180318 to to my BLU life one X 2016,
No mobile signal ....looks no baseband ...
I have to flash back to the stock to use my phone again, sigh !


  • Screenshot_20180714-070959.png
    131.4 KB · Views: 101
Last edited:


Senior Member
Feb 7, 2016
Flashed to the latest version madOS_8.1.0_fever_20180318 to to my BLU life one X 2016,
No mobile signal ....looks no baseband ...
I have to flash back to the stock to use my phone again, sigh !
You need to go through a specific installation method to get it working on Blu. Look through the pages here and you'll find it. Can't remember what page it is exactly.


Senior Member
Oct 10, 2016

Can I flash this image on Ulefone Paris? (I think phones are identic according to specs)
Do I need some extra steps?



Senior Member
Oct 10, 2016
Why there in no rom's for Paris?
Last rom I use is MIUI rom, but I need more AOSP rom. Anyone can make rom for Paris or provide how to change this rom to fit Paris?

I found also rom for Ulefone Metal but it wont work on Paris....


Senior Member
Aug 21, 2016
When you edit any picture via default gallery app and while saving your pic ...you can see some developer error toast messages...

---------- Post added at 03:46 PM ---------- Previous post was at 03:45 PM ----------

Why there in no rom's for Paris?
Last rom I use is MIUI rom, but I need more AOSP rom. Anyone can make rom for Paris or provide how to change this rom to fit Paris?

I found also rom for Ulefone Metal but it wont work on Paris....

Donate a ' Paris ' for team MAD then you will get roms for your 'Paris'

---------- Post added at 03:48 PM ---------- Previous post was at 03:46 PM ----------

This rom is for which device?

Nokia 3310

Top Liked Posts

  • There are no posts matching your filters.
  • 20

    This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
    Micromax Canvas 5 E481
    Blu Life One X
    Myphone 36

    madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.

     * Your warranty is now void.
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.

    • RIL (Calls /SMS, Data connection, etc)
    • Wifi
    • Bluetooth
    • FM Radio
    • All Sensors
    • Lights;
    • Both storages & MTP
    • HW de/encoding
    • Camera (photos and video)
    • GPS & aGPS
    • Audio
    • madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)

    Not working:

    XDA:DevDB Information
    madOS_O_FEVER, ROM for all devices (see above for details)

    DerTeufel1980, fire855, superdragonpt
    Source Code: https://github.com/MediatekAndroidDevelopers

    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 3.x
    ROM Firmware Required: unlocked bootloader, twrp
    Based On: AOSP

    Version Information
    Status: Stable
    Stable Release Date: 2018-03-19

    Created 2018-03-13
    Last Updated 2018-03-22
    First time Install Instructions

    0) Preparation

    0.1) Backup your important data to PC

    0.2) Ensure you are running Wiko Fever Android 6 already (also/especially when your device is not wiko fever, but a clone). If you are not, please update to it, before continuing here (replace the preloader from the wiko rom with your stock one, then use 'firmware upgrade' mode in sp flashtool. NEVER use 'format all + download')

    Extra steps, if you are on blu life one x:

    0.3) Download “twrp_wiko_fever_oreo.img“: [url]http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img[/URL]

    0.4) Download “madOS_8.1.0_fever_2018xxyy.zip“ [url]https://www.facebook.com/MediatekAndroidDevelopers/[/URL]

    0.5) Optional, Download “Google Apps (aka Gapps)“: [url]http://opengapps.org/[/URL]. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package

    1) Unlock bootloader (if not done already):

    1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.

    1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.

    2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))

    2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
    Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
    and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).

    2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“

    3) Install

    3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
    Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
    Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".

    3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.

    3.2) Go to "Wipe", and directly slide the slider to the right.

    3.3) Get back to main menu with the "back" button

    3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
    Confirm installation by swiping the slider to the right.

    3.5) Reboot System

    Follow up Install Instructions
    • Download rom and gapps
    • boot to recovery
    • flash rom and gapps
    • optional: flash superSu/Magisk
    • reboot system

    General F.A.Q.

    Q: What the hell is madOS ?
    A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.

    Q: Which recovery should I use for this ROM?
    A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0

    Q: How do i flash new recovery ?
    1: You can flash it with a scatter file
    2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
    Reboot to recovery to use new one

    Q: Do i need to make full wipes?
    A: YES, dont come crying at me, if you didn't .... ;p

    Q: What is "full wipes" ?
    A: To Wipe : Cache; System; DATA ...

    Q: What should i use f2fs or ext4?
    A: Both are supported, choose the one you desire

    Q: Does this rom have any Theme support
    A: Yup, We have working Theme Engine (madOS extras)

    Update: On Oreo 8.1.0:
    - We have extended Theme support even further ( madLauncher, messaging, etc)
    - As well as many fixes

    Q: Some translations are missing for my language, can I help?
    A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).

    Q: I want to report a bug(s) do you have an issue tracker?
    A: Yeah... madOS issue tracker

    Q: What's working ?
    A: Check first Post for current status

    Q: App "x" doesn't work, why?
    A: Probably not compatible with OREO yet, feedback is welcome

    Q: Is the rom rooted?
    A: NO, But you can easily root with :
    1: Magisk ( v14 onwards.)
    2: Super SU ( v2.82 onwards)
    IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do

    Q: Should i root together with rom ?
    A: Not advised.. mainly the Magisk that gives some weird issues...
    Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method

    Q: Does xposed work?
    A: Is there Xposed for O? ... then no ;p

    Q: How is battery life with Oreo?
    A: Pretty awesome

    Q: Does this build support Vulcan?
    A: No....duh! v

    Q: Does doze work in this build?
    A: Yup

    Q: when will (feature/issue here) be fixed?
    A: NO ETA , please

    Porting F.A.Q.
    No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well

    G.APPS F.A.Q.

    Q:What GAPPS package should I use?
    A: openGapps arm64 nano/pico

    Q: How to properly install GAPPS?
    A:Flash Rom + Flash Gapps at once

    CREDITS and Thanks

    madOS Team
    Our translators, credits list here
    Pure Nexus
    DU (Dirty Unicorns)

    HELP supporting madOS

    We do this on our free time, however we do have costs on maintaining this :/

    Any donation is highly appreciated

    You can donate by using
    this link

    If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]

    About madOS Proprietary Apps

    You are NOT allowed by any means, to use our madOS apps on any other build, your rom
    This is exclusively for OFFICIAL madOS ROM releases

    @To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...
    Changelog 19th March 2018:
    • fixed offline charging
    • fixed proximity and light sensor
    • fixed applying smartwake settings after reboot

    Facebook release post: https://www.facebook.com/notes/mad/rom-810-official-mados-wiko-fever-mt6753/1640799096003857/
    for whatever reason, devDB is not working (very well) at the moment...causing this thread to be shown up, hours after i created it....now it's finally here and updated...and can be used :)
    Finally got oreo working with sims. Ill post wt i did soon

    ---------- Post added at 01:47 PM ---------- Previous post was at 01:13 PM ----------

    To get Oreo working on Blu, do the following:
    1. On Stock Blu MM backup IMEI using Mobile Uncle app. Put this backup on SDCARD so it does not get erased when you flash later.
    2. SPFlashTools>Format> Do an "Auto Format" flashing all except bootloader.
    3. SPFlashTools> "Format and Download" Wiko LP v11 Firmware but with BLU LP Preloader and Secro.
    4. When phone Boots up, check that baseband is not saying "Unknown". Sim will not be working at this point.

    ***Next Upgrade to Marshmallow before Continuing*** (Somehow after flashing Wiko LP i was already on Wiko MM, so just to be safe, upgrade to MM before continuing)

    5. Unlock Bootloader, flash twrp and flash magisk 16.0.
    6. Install MobileUncle and restore IMEI.
    7. Go to TWRP, install Oreo TWRP and reboot recovery. Found on facebook page https://www.facebook.com/notes/mad/rom-810-official-mados-wiko-fever-mt6753/1640799096003857/
    8. (Optional) Backup NVRAM just in case.
    9. Do a factory reset and finally flash madOS_8.1.0_fever_20180318.zip and open_gapps-arm64-8.1-pico-20180311.zip.

    Bugs I've Noticed:
    - Flashlight only works on Front Flash
    - Camera only has FrontCam View and is upside-down.
    - Double tap to wake screen not working