• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [ 8.1.0 ] Official madOS - Wiko Fever (and clones) [MT6753]

Status
Not open for further replies.
Search This thread

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,637
VmDiDSr.png

This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Casper via M1
Qmobilez10


madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.


Code:
#include
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */


Working:
  • RIL (Calls /SMS, Data connection, etc)
  • Wifi
  • Bluetooth
  • FM Radio
  • All Sensors
  • Lights;
  • Both storages & MTP
  • HW de/encoding
  • Camera (photos and video)
  • GPS & aGPS
  • Audio
  • madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)

Not working:
 
Last edited:

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,637
First time Install Instructions

0) Preparation

0.1) Backup your important data to PC

0.2) Download “twrp_wiko_fever_oreo.img“: http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img

0.3) Download “madOS_8.1.0_fever_2018xxyy.zip“ https://www.facebook.com/MediatekAndroidDevelopers/

0.4) Optional, Download “Google Apps (aka Gapps)“: http://opengapps.org/. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package


1) Unlock bootloader (if not done already):

1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.

1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.


2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))

2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).

2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“


3) Install

3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".

3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.

3.2) Go to "Wipe", and directly slide the slider to the right.

3.3) Get back to main menu with the "back" button

3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
Confirm installation by swiping the slider to the right.

3.5) Reboot System

Follow up Install Instructions
  • Download rom and gapps
  • boot to recovery
  • flash rom and gapps
  • optional: flash superSu/Magisk
  • reboot system


General F.A.Q.

Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.

Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0

Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one


Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p

Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...

Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire

Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)

Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixes


Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).

Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker

Q: What's working ?
A: Check first Post for current status

Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome

Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do

Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method

Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p

Q: How is battery life with Oreo?
A: Pretty awesome

Q: Does this build support Vulcan?
A: No....duh! v

Q: Does doze work in this build?
A: Yup

Q: when will (feature/issue here) be fixed?
A: NO ETA , please


Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well

G.APPS F.A.Q.

Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico


Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once



CREDITS and Thanks

madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni


HELP supporting madOS

We do this on our free time, however we do have costs on maintaining this :/

Any donation is highly appreciated

You can donate by using
this link

If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]


About madOS Proprietary Apps

You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases


@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...
 
Last edited:

pepesoler98

Member
Jul 3, 2014
20
3
Hi, Good Job with all your Rom's and devices supported.
It's possible that the mad theam could help me to create a custom rom for my device? I've got two mkt phones, one mtk6592 and other mtk6735.
Thanks for your work!!
 

Jorge_007

Senior Member
Apr 2, 2013
185
78
Riverside, CA
I tried this ROM on a Blu Life One X 2016, everything seems to work except baseband; unknown. Anyone have any ideas on how to get cellular to work? Thanks.
edit: I just noticed that doing a "Format All + Download" re-locks the bootloader. Reinstalling factory ROM and going to do a bootloader unlock and try again.
edit 2: After unlocking the bootloader and following the guide baseband continues to say unknown after flashing. Oh well....
 
Last edited:

Rick02

Member
Nov 14, 2016
33
39
Uttar pradesh
@DerTeufel1980 can you add "micromax-canvas-5" tag so that micromax canvas user can view this thread easily :)
Good idea

---------- Post added at 08:42 AM ---------- Previous post was at 08:41 AM ----------

I tried this ROM on a Blu Life One X 2016, everything seems to work except baseband; unknown. Anyone have any ideas on how to get cellular to work? Thanks.
edit: I just noticed that doing a "Format All + Download" re-locks the bootloader. Reinstalling factory ROM and going to do a bootloader unlock and try again.
edit 2: After unlocking the bootloader and following the guide baseband continues to say unknown after flashing. Oh well....
I guess u are not on the whatsapp or telegram group where we support our devices.

---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------

This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Casper via M1
Qmobilez10

madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.





Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)


Not working:
Thanks a lot sir for giving our devices a new soul.?:laugh:
 

superdragonpt

Recognized Developer
Apr 27, 2013
4,923
19,271
Lisbon / Taiwan / USA
www.caixamagica.pt
The ROM was made using an Wiko device in the bring up

I know very well this TINNO devices, that are rebranded to many OEMs

In case of baseband (ie: BLU,Qmobile, MMX, you should use your stock baseband modem and place it under vendor/etc)

Cheers

PS: can you, that have other clones ( non-wiko) send us your working baseband?
(This way, we could perhaps just made an flashable zip for baseband or so)
 

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,637
Last edited:
  • Like
Reactions: Rick02
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    VmDiDSr.png

    This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
    Micromax Canvas 5 E481
    Blu Life One X
    Myphone 36
    Casper via M1
    Qmobilez10


    madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.


    Code:
    #include
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */


    Working:
    • RIL (Calls /SMS, Data connection, etc)
    • Wifi
    • Bluetooth
    • FM Radio
    • All Sensors
    • Lights;
    • Both storages & MTP
    • HW de/encoding
    • Camera (photos and video)
    • GPS & aGPS
    • Audio
    • madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)

    Not working:
    4
    First time Install Instructions

    0) Preparation

    0.1) Backup your important data to PC

    0.2) Download “twrp_wiko_fever_oreo.img“: http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img

    0.3) Download “madOS_8.1.0_fever_2018xxyy.zip“ https://www.facebook.com/MediatekAndroidDevelopers/

    0.4) Optional, Download “Google Apps (aka Gapps)“: http://opengapps.org/. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package


    1) Unlock bootloader (if not done already):

    1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.

    1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.


    2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))

    2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
    Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
    and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).

    2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“


    3) Install

    3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
    Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
    Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".

    3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.

    3.2) Go to "Wipe", and directly slide the slider to the right.

    3.3) Get back to main menu with the "back" button

    3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
    Confirm installation by swiping the slider to the right.

    3.5) Reboot System

    Follow up Install Instructions
    • Download rom and gapps
    • boot to recovery
    • flash rom and gapps
    • optional: flash superSu/Magisk
    • reboot system


    General F.A.Q.

    Q: What the hell is madOS ?
    A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.

    Q: Which recovery should I use for this ROM?
    A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0

    Q: How do i flash new recovery ?
    A:
    1: You can flash it with a scatter file
    2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
    Reboot to recovery to use new one


    Q: Do i need to make full wipes?
    A: YES, dont come crying at me, if you didn't .... ;p

    Q: What is "full wipes" ?
    A: To Wipe : Cache; System; DATA ...

    Q: What should i use f2fs or ext4?
    A: Both are supported, choose the one you desire

    Q: Does this rom have any Theme support
    A: Yup, We have working Theme Engine (madOS extras)

    Update: On Oreo 8.1.0:
    - We have extended Theme support even further ( madLauncher, messaging, etc)
    - As well as many fixes


    Q: Some translations are missing for my language, can I help?
    A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).

    Q: I want to report a bug(s) do you have an issue tracker?
    A: Yeah... madOS issue tracker

    Q: What's working ?
    A: Check first Post for current status

    Q: App "x" doesn't work, why?
    A: Probably not compatible with OREO yet, feedback is welcome

    Q: Is the rom rooted?
    A: NO, But you can easily root with :
    1: Magisk ( v14 onwards.)
    2: Super SU ( v2.82 onwards)
    IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do

    Q: Should i root together with rom ?
    A: Not advised.. mainly the Magisk that gives some weird issues...
    Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method

    Q: Does xposed work?
    A: Is there Xposed for O? ... then no ;p

    Q: How is battery life with Oreo?
    A: Pretty awesome

    Q: Does this build support Vulcan?
    A: No....duh! v

    Q: Does doze work in this build?
    A: Yup

    Q: when will (feature/issue here) be fixed?
    A: NO ETA , please


    Porting F.A.Q.
    No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well

    G.APPS F.A.Q.

    Q:What GAPPS package should I use?
    A: openGapps arm64 nano/pico


    Q: How to properly install GAPPS?
    A:Flash Rom + Flash Gapps at once



    CREDITS and Thanks

    madOS Team
    Our translators, credits list here
    A.O.S.P.
    Pure Nexus
    AOSPA
    DU (Dirty Unicorns)
    Omni


    HELP supporting madOS

    We do this on our free time, however we do have costs on maintaining this :/

    Any donation is highly appreciated

    You can donate by using
    this link

    If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]


    About madOS Proprietary Apps

    You are NOT allowed by any means, to use our madOS apps on any other build, your rom
    This is exclusively for OFFICIAL madOS ROM releases


    @To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...
    4
    The ROM was made using an Wiko device in the bring up

    I know very well this TINNO devices, that are rebranded to many OEMs

    In case of baseband (ie: BLU,Qmobile, MMX, you should use your stock baseband modem and place it under vendor/etc)

    Cheers

    PS: can you, that have other clones ( non-wiko) send us your working baseband?
    (This way, we could perhaps just made an flashable zip for baseband or so)
    2
    @DerTeufel1980 can you add "micromax-canvas-5" tag so that micromax canvas user can view this thread easily :)
    2
    @DerTeufel1980 can you add "micromax-canvas-5" tag so that micromax canvas user can view this thread easily :)
    Good idea

    ---------- Post added at 08:42 AM ---------- Previous post was at 08:41 AM ----------

    I tried this ROM on a Blu Life One X 2016, everything seems to work except baseband; unknown. Anyone have any ideas on how to get cellular to work? Thanks.
    edit: I just noticed that doing a "Format All + Download" re-locks the bootloader. Reinstalling factory ROM and going to do a bootloader unlock and try again.
    edit 2: After unlocking the bootloader and following the guide baseband continues to say unknown after flashing. Oh well....
    I guess u are not on the whatsapp or telegram group where we support our devices.

    ---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------

    This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
    Micromax Canvas 5 E481
    Blu Life One X
    Myphone 36
    Casper via M1
    Qmobilez10

    madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.





    Working:
    RIL (Calls /SMS, Data connection, etc)
    Wifi
    Bluetooth
    FM Radio
    All Sensors
    Lights;
    Both storages & MTP
    HW de/encoding
    Camera (photos and video)
    GPS & aGPS
    Audio
    madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)


    Not working:
    Thanks a lot sir for giving our devices a new soul.?:laugh: