[ROM] [8.1.0] Resurrection Remix 6.1.0 [UNOFFICIAL] [BARDOCKPRO]

Search This thread
Resurrection Remix 6.1.0 Oreo Unofficial [14/06/18]

ONLY BQ AQUARIS X PRO​

Code:
[CENTER]* Your warranty is now void. * 

  * We are not responsible for bricked devices, dead SD cards, 
* thermonuclear war, or you getting fired because the alarm app failed. Please 
* do some research if you have any concerns about features included in this ROM 
* before flashing it! YOU are choosing to make these modifications, and if 

  * you point the finger at us for messing up your device, we will laugh at you.[/CENTER]



Installation instructions

  • CLEAN FLASH:

  1. Download the latest build and GApps
  2. Reboot to recovery
  3. Make NAndroid backup (Not Necessary)
  4. Wipe System, Data, Cache , Dalvik
  5. Flash the latest build and GApps
  6. Reboot

  • DIRTY FLASH:

  1. Download the latest build
  2. Reboot to recovery
  3. Flash the latest build
  4. Wipe Cache
  5. Reboot
Note: GApps only has to be flashed once whereas Magisk/Su is to be flashed every time you Dirty Flash the OTA Update.
Downloads

Note : Pico, Nano or Micro Gapps are recommended.
Source
Contributors: LluisR98, Eloimuns, Brinly (and other members of AquarisDev) and Others
Source Code: LineageOS
Device tree, kernel and Vendor Source: GitHub
Version Information
ROM Firmware Required: 2.0.0 BQ Stock
ROM OS Version: 8.1.0 Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Status: Testing
Device: Bardockpro
Maintainer: LluisR98
Build Status: UnOfficial
Created 2018-06-14
Last Updated 2018-06-14​
 
Last edited:

xdaerrge

New member
Jun 27, 2017
1
0
Everything works well, except for the brightness

Hello, can you please try to connect to the device with "adb shell" and then issue this command:
Code:
settings put system screen_brightness 0

If my guess is right, after this you should have a working brightness slider even after reboot!
 
Hello, can you please try to connect to the device with "adb shell" and then issue this command:
Code:
settings put system screen_brightness 0

If my guess is right, after this you should have a working brightness slider even after reboot!

When I compile the version I'll try it, with the official files of LineageOS after its release
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Resurrection Remix 6.1.0 Oreo Unofficial [14/06/18]

    ONLY BQ AQUARIS X PRO​

    Code:
    [CENTER]* Your warranty is now void. * 
    
      * We are not responsible for bricked devices, dead SD cards, 
    * thermonuclear war, or you getting fired because the alarm app failed. Please 
    * do some research if you have any concerns about features included in this ROM 
    * before flashing it! YOU are choosing to make these modifications, and if 
    
      * you point the finger at us for messing up your device, we will laugh at you.[/CENTER]



    Installation instructions

    • CLEAN FLASH:

    1. Download the latest build and GApps
    2. Reboot to recovery
    3. Make NAndroid backup (Not Necessary)
    4. Wipe System, Data, Cache , Dalvik
    5. Flash the latest build and GApps
    6. Reboot

    • DIRTY FLASH:

    1. Download the latest build
    2. Reboot to recovery
    3. Flash the latest build
    4. Wipe Cache
    5. Reboot
    Note: GApps only has to be flashed once whereas Magisk/Su is to be flashed every time you Dirty Flash the OTA Update.
    Downloads

    Note : Pico, Nano or Micro Gapps are recommended.
    Source
    Contributors: LluisR98, Eloimuns, Brinly (and other members of AquarisDev) and Others
    Source Code: LineageOS
    Device tree, kernel and Vendor Source: GitHub
    Version Information
    ROM Firmware Required: 2.0.0 BQ Stock
    ROM OS Version: 8.1.0 Oreo
    ROM Kernel: Linux 3.10.x
    Based On: LineageOS
    Status: Testing
    Device: Bardockpro
    Maintainer: LluisR98
    Build Status: UnOfficial
    Created 2018-06-14
    Last Updated 2018-06-14​
    2
    hey luis, take it easy . but good to know that the project is still alive!
    have nice one...

    Hello again! After reading the AquarisDev Slack, they are waiting to solve RIL problems. If I see that it takes too long I will update before I RR with the latest changes to date.
    1
    please use english, thanks [emoji106]
    Fixed, sorry!

    Enviado desde mi Aquaris X Pro mediante Tapatalk
    1
    Fixed, sorry!

    Enviado desde mi Aquaris X Pro mediante Tapatalk
    no problem, thanks
    1
    Right now I can not compile, I have a couple of my projects before and the temperatures do not help ... As soon as I can, I update quickly
    hi @luis, is there anything new coming or is the project dead?

    Enviado desde mi Redmi 5 Plus mediante Tapatalk