[ROM][9.0][angler] Pixel Experience [AOSP][2019/12/13]

[rdr]

Is it possible 8.1 reads the battery charge differently than 9 and 10?

I am sure it is because of this. What I have observed is that, if I put my device in airplane mode for a few hours starting at around 80% charge, it ends up with 70% after 6 hours - and when I take it out of airplane mode to use it, it shuts down immediately. But, if I keep using the device, it works fine all they way down to 10% at least.

If I turn on the phone after the sudden shutdown, it is still at 50% charge sometimes, and at around 30% sometimes too. But it is nowhere near the 60-70% which it was before the shutdown.

I think the battery is being read worng when the device is sleeping and a sudden drop in charge triggers the shutdown.

And it is possible that changing the battery is somehow resetting or fixing this behaviour of reading battery stats. Which would mean loads of people are unnecessarily changing their batteries

I'm getting a new battery shortly.. will test the old one once I have replaced it.

 

[Hasnain2k17]

I am sure it is because of this. What I have observed is that, if I put my device in airplane mode for a few hours starting at around 80% charge, it ends up with 70% after 6 hours - and when I take it out of airplane mode to use it, it shuts down immediately. But, if I keep using the device, it works fine all they way down to 10% at least.

If I turn on the phone after the sudden shutdown, it is still at 50% charge sometimes, and at around 30% sometimes too. But it is nowhere near the 60-70% which it was before the shutdown.

I think the battery is being read worng when the device is sleeping and a sudden drop in charge triggers the shutdown.

And it is possible that changing the battery is somehow resetting or fixing this behaviour of reading battery stats. Which would mean loads of people are unnecessarily changing their batteries

I'm getting a new battery shortly.. will test the old one once I have replaced it.

Please post about your experience...... i have same problem

 

[PixelBoot]

December Update

• December Security Patch

• Download from Pixel Experience website
  [*]Download from System Updater

 

[hexapi]

I updated today from Pie July version to Pie Plus December version. Since then, I cannot write on my root drive. I even uninstalled and reinstalled magisk. Any advice?

 

[riohasmadi]

flash franco kernel error

I installed the franco kernel via twrp install error, can anyone help

 

[riohasmadi]

stuck logo google

This flash failed ROM, both the usual and the plus ones, stuck the Google logo

 

[gatoraid84]

This flash failed ROM, both the usual and the plus ones, stuck the Google logo

format data in recovery. Use the built in kernel

 

[riohasmadi]

format data in recovery. Use the built in kernel

format data in recovery is done, still stuck logo google, built in kernel original, because kernel franco cant'n flash in this rom PE 9.0

 

[gatoraid84]

format data in recovery is done, still stuck logo google, built in kernel original, because kernel franco cant'n flash in this rom PE 9.0

Ya I know that, you said you flashed the Franco kernel which is not compatible with this software. If you followed all the steps in the OP correctly you just need to be patient. My first boot on this rom took about 10-15 minutes on the G logo boot screen

 

[riohasmadi]

Ya I know that, you said you flashed the Franco kernel which is not compatible with this software. If you followed all the steps in the OP correctly you just need to be patient. My first boot on this rom took about 10-15 minutes on the G logo boot screen

seriously? It took 10-15 minutes to boot first?, unfortunately no way in PE 9.0, I finally fixed stock rom

 

[dudikaz]

• December Security Patch

• Download from Pixel Experience website
  [*]Download from System Updater

hello pixelboot is it the only change?

 

[Lawlrus]

hello pixelboot is it the only change?

Don't they list changes on their blog? Also you could check github which is also in the op

 

[Robshr]

ok so when i try to install rom i get an errorm
E3004: this package is for device : angler; this device is.
updater process ended with error 7
and then it ends and nothing flashes
does anyone know how to fix this or whats wrong
thanks

 

[gatoraid84]

ok so when i try to install rom i get an errorm
E3004: this package is for device : angler; this device is.
updater process ended with error 7
and then it ends and nothing flashes
does anyone know how to fix this or whats wrong
thanks

If I'm not mistaken it sounds like you are not using the correct TWRP. You have to use the FBE TWRP provided by the OP

 

[wschlich]

https://download.pixelexperience.org/angler/ says:

Android 10
Maintainer: Unknown
This edition will no longer receive updates.

Please bring back support for the Nexus 6P ;'-(

Otherwise, it seems that PixelExperience_angler-10.0-20200101-0925-OFFICIAL.zip will be the last release for the Nexus 6P...

 

[RenanDr0id]

PixelExperience_angler-10.0-20191113-2124-OFFICIAL (download link)

Hi guys.
Like many of you, I had problems with the December (camera doesn't work) and January (lock screen and router issues) PE builds for our dear angler. After much searching for the November build, a fellow made the file available to me.
Follow PixelExperience_angler-10.0-20191113-2124-OFFICIAL download link:

h t t p s : //d r i v e.google.com/open?id=1XGYEfZAdcZFC2pRtvnkb-gRXEGojb_3q

(remove spaces to validate address)

 

[wschlich]

Like many of you, I had problems with the December (camera doesn't work) and January (lock screen and router issues) PE builds for our dear angler. After much searching for the November build, a fellow made the file available to me.

Can you please explain with details about the issues you are referring to?

 

[mzakharocsc]

/vendor as read/write

One way this ROM departs from the stock ROMs is mounting /vendor as squashfs read-only. Does anyone know how to mount /vendor as read/write in PixelExperience?

 

[gokul.mafia]

Hi guys,
I just bought a used nexus 6p from my neighbour.
Can you please suggest me which build is the stablest one?

Have a great day.

 

[marianodelfino]

Hi guys,
I just bought a used nexus 6p from my neighbour.
Can you please suggest me which build is the stablest one?

Have a great day.

July