[ROM][9.0] CrDroid-Android v5.3 [Official][Z00L/T]

[katcj]

I had the same problem but I found I could install 17.3 and then I did a direct install of 18 from the manager. You might try this. Great ROM by the way. Thanks to the developer for keeping the ZOOT alive and up to date.

This worked for me

 

[syed sadik vali]

Installed this today on my ZOOT super smooth battery also ok every apps are working fine. As all said i flashed magsik 16.0 and worked fine. But i need the volte function that's why back to lineage. Once it comes i will switch back to this. I don't care about camera. Excellent build. Nice to see our device running on Android 9.0

 

[rhul334]

Screenshots

where is that swipe up on home button option. I cant find it.i need the pie navigation bar like in the last screenshot. im using z00ld

---------- Post added at 03:03 PM ---------- Previous post was at 03:01 PM ----------

where is that swipe up on home button option. I cant find it.i need the pie navigation bar like in the last screenshot. im using z00ld

also im unable to flash magisk,i tried 18.0,16.7,17.3
after booting into rom,before booting into rom.

 

[mg712702]

where is that swipe up on home button option. I cant find it.i need the pie navigation bar like in the last screenshot. im using z00ld

Enable Nav Bar First

 

[fabricio6791]

hi there... works speakers on z00t??

 

[rhul334]

Enable Nav Bar First

then?
can u give me a screenshot

 

[mg712702]

then?
can u give me a screenshot

Then check settings>system>gesture

 

[benedictsalamat]

Same audio problem..,

Still no audio on my ze601kl zenfone 2 laser z00t all android pie roms even after doing a clean flash.,flashing the patch for audio for oreo roms make the phone bootloop.,is there any work around?,please help.,

 

[$tar]

Device : Z00T
crDroid : 2019-01-21

Many thanks to mg712702 for putting this together - looks great!

A few notes:
-I was upgrading from Lineage OS and I needed to not just wipe /data but do a reformat to get it to boot - I was getting "please enter your android password" prompts on boot even after flashing. TWRP may seem to fail with the message "couldn't mount /data" but try rebooting and it may just have worked enough to boot.
-I originally flashed ROM + gapps and the camera worked fine. Without gapps the camera crashes. (as pointed out above)
- I tried to install Magisk - TWRP rebooted suddenly halfway through the install and now the ROM hangs on boot. Guess I am going to have to reflash.

So you're saying that the camera is as reliable as in Nougat or Marshmallow ROM?

 

[mg712702]

Still no audio on my ze601kl zenfone 2 laser z00t all android pie roms even after doing a clean flash.,flashing the patch for audio for oreo roms make the phone bootloop.,is there any work around?,please help.,

Where is the logs??

 

[benedictsalamat]

Where is the logs??

https://anotepad.com/notes/p9qrep

---------- Post added at 08:27 AM ---------- Previous post was at 08:02 AM ----------

Where is the logs??

https://anotepad.com/notes/f8cs9n

 

[katcj]

So you're saying that the camera is as reliable as in Nougat or Marshmallow ROM?

Haven't used it so much , so cant compare, but seems to work more often than not.

---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------

I think the shutdown and reboot buttons need some work:

shutdown - reboots system.
reboot system - Works- restarts system.
restart recovery - shutdown - sort of - goes to blank screen but pressing power button vibrates but does not turn on device. I need to take out battery and put it back in in order to reboot.
restart bootloader - restart system.

 

[daniu]

Haven't used it so much , so cant compare, but seems to work more often than not.

---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------

I think the shutdown and reboot buttons need some work:



shutdown - reboots system.

reboot system - Works- restarts system.

restart recovery - shutdown - sort of - goes to blank screen but pressing power button vibrates but does not turn on device. I need to take out battery and put it back in in order to reboot.

restart bootloader - restart system.

The button issue is a known problem of newer magisk versions ...

 

[mg712702]

https://anotepad.com/notes/f8cs9n

If you want to test few stuffs for the speaker fix, then join our telegram group...

I think the shutdown and reboot buttons need some work:

shutdown - reboots system.
reboot system - Works- restarts system.
restart recovery - shutdown - sort of - goes to blank screen but pressing power button vibrates but does not turn on device. I need to take out battery and put it back in in order to reboot.
restart bootloader - restart system.

If possible, share the logcat & dmesg of the reboot issue..

 

[katcj]

If possible, share the logcat & dmesg of the reboot issue..

Very strange - I had different behavior depending on whether I had the log level at debug or info.
https://mega.nz/#!uvJXlKiR!2Sne9ZKD_aYGcWl-sh0HV6Y38oZN2SBQ4_s512uZ7m0

1 shutdown debug - shutdown properly
2 restart system debug- seemingly shut down - long pressing power causes vibration, but had to remove battery in order to actually power on .
3 restart recovery debug - same
4 restart bootloader debug - restart to system

5 shutdown info- reboot to system
6 shutdown info - reboot to system

7 shutdown debug - seemingly shut down - long pressing power causes vibration, but had to remove battery in order to actually power on .
8 shutdown debug - shutdown properly

9 restart system info - restart system normally
10 restart recovery info - restart system
11 restart bootloader info - restart system

 

[katcj]

and using Magisk 18.1

 

[benedictsalamat]

If you want to test few stuffs for the speaker fix, then join our telegram group...

Whats the link for our telegram group..?,

 

[fuady7]

Very strange - I had different behavior depending on whether I had the log level at debug or info.
https://mega.nz/#!uvJXlKiR!2Sne9ZKD_aYGcWl-sh0HV6Y38oZN2SBQ4_s512uZ7m0

1 shutdown debug - shutdown properly
2 restart system debug- seemingly shut down - long pressing power causes vibration, but had to remove battery in order to actually power on .
3 restart recovery debug - same
4 restart bootloader debug - restart to system

5 shutdown info- reboot to system
6 shutdown info - reboot to system

7 shutdown debug - seemingly shut down - long pressing power causes vibration, but had to remove battery in order to actually power on .
8 shutdown debug - shutdown properly

9 restart system info - restart system normally
10 restart recovery info - restart system
11 restart bootloader info - restart system

that is known problem in newer magisk in oreo/pie, such as magisk 17 and 18
Try to use magisk 16 instead, in my Z00T this problem solved.

 

[celem]

Vs980 lg g2

My Verizon VS980 works perfectly on official 4.2.2, 4.4.2 and 5.0.2 releases but if I flash crDroid the radio is 1x or 3G - doesn't see LTE. Currently the 39A bootstack is present with crDroid 4.7. Is there a ROM install path/procedure that results in a fully functioning LTE radio?

 

[giuseppe.corradelli]

Camera crash