[ROM][9.0][ LineageOS 16.0 For MediaPad M3 Lite 8/10 ]

Search This thread

surdu_petru

Recognized Contributor
Feb 3, 2010
7,106
23,102
Paris
Hi:)
Some apps could not run after I flash this ROM on my Lite 10 BAH-W09, the apps will crash soon when they appeared. But this was not happened on stock ROM.
Installed apps: Magisk, XDA Labs, APKPure, Firefox, Mixplorer, IceBox, Shadowsocks, Clash for Android, MXPlayer, Tachiyomi.
Crashed apps: Xodo PDF Reader, Greenify.
I have not installed Gapps.
And there is another issue, when reboot, the time will reset to 11:00 2019-11-7. Although I have set time manually, and the battary is full.

What I can do for fixing these issues?:confused:

Please, can you try a clean flash and check if you still have the same issues ? The time shouldn't reset as your device is connected to WiFi.

Anyway if you still have issues you can switch to LOS 17.0 Android 10, because this rom will not receive any updated.

Thanks !
 
Hi, I didn't see an appropriate thread for my question so chose one with high activity. I bought a bricked M3 real cheap and it was sold as BTV-W09. When opening tablet I found board ID to be SH1BTVDL09M VER.A RF HF. Did Huawei use parts interchangeable between the two or did I not buy W09 but DL09 instead ? Can confirm no mic on charger port board for LTE. How to determine which device it really is ? Also, would anybody happen to know location of test point ? I've looked what seems like everywhere and have not found anything. I have a SigmaKey but it does no good if I can't connect. Any help would be great and greatly appreciated. Thanks
 

An1dy

New member
Oct 27, 2016
2
0
M3 lite 10 is not booting into TWRP ...

Hey,

I really spend quite a lot hours to get the twrp and the Lineage 17 OS installed but something is wrong and everything I read does not solve my problem. Can some one my help ?
What have I done:
Downloaded all recommeded files and software
1. unlock the Tab (Phone and FRP unlocked on Fast Boot Screen)
2.installed HISuite on PC
3. installed ADB driver
4. started CMD in Admin Mode and installed TWRP ( recommeded Version 3.3.1.-1)
5. rebooting of Tab always end in Huawei Bootloader ... AND from there into TWRP bit there is no menu. Only the start screen of TWRP .... and than nothing happen from this point on ...


Any Idea ? or information needed ?
 
Last edited:

surdu_petru

Recognized Contributor
Feb 3, 2010
7,106
23,102
Paris
Hey,

I really spend quite a lot hours to get the twrp and the Lineage 17 OS installed but something is wrong and everything I read does not solve my problem. Can some one my help ?
What have I done:
Downloaded all recommeded files and software
1. unlock the Tab (Phone and FRP unlocked on Fast Boot Screen)
2.installed HISuite on PC
3. installed ADB driver
4. started CMD in Admin Mode and installed TWRP ( recommeded Version 3.3.1.-1)
5. rebooting of Tab always end in Huawei Bootloader ... AND from there into TWRP bit there is no menu. Only the start screen of TWRP .... and than nothing happen from this point on ...


Any Idea ? or information needed ?

Please read again carefully the info into TWRP 3.3.1-0 !

Your device it's on stock Huawei Android N, so you can't use TWRP 3.3.1-1 nor TWRP 3.3.1-0 !

Edit:

I guess you got it : just install 3.2.0 format data into TWRP and install first Los 16.0, from here you can update twrp and also the Rom !
 
Last edited:
  • Like
Reactions: An1dy

Atomotti

New member
Jun 3, 2020
1
0
Just installed TWRP 3.2, Lineage OS 16 and GApps. System boots but hangs in the beginning where the circle goes from right to left. Is this a known issue?

UPDATE: I was a bit impatient. After a couple of minutes system showed me the welcome screen. Sorry for posting too early.
 
Last edited:

JaimeGalindo

New member
Nov 19, 2017
2
0
Need Help!!!

Just installed twrp_3.2.0-0, Lineage OS 16 20190822, and GApps Pico. System boots but hangs at the beginning where the circle goes from right to left. I have tried all the forum ROMs and they all do the same thing... This is the first time that I try to install a custom ROM
 

GREGover

New member
Sep 15, 2020
1
0
Nethunter Bah L09

Hello, who ever tried to make a kernel under Nethunter? A friend helped me build on android 10, but it didn't work out. Who ever tried to do under 9 Android?:eek:
 

surdu_petru

Recognized Contributor
Feb 3, 2010
7,106
23,102
Paris
Download for lineage-16.0-20190822-UNOFFICIAL-bach.zip doesn't work. I am trying to go from stock EMUI to LOS 17.1. Can I go from stock directly to the latest LOS 16 build or do need to flash build 20190822 first?
It doesn't matter which version you use as long as it's based on Android Pie/ LOS 16.0 !

You need to follow the installation instructions from TWRP and Lineage OS carefully and you will certainly not encounter any issues.
 

ossizwei

Senior Member
Camera still doesn't work? I need this not for pictures, but QR codes in some apps.
Yes, you can't save pictures. But often camera works in apps to get QR codes. I'm using it with banking app and SecScanQR app or with Signal for desktop. The only problem is, its working in "slow motion ". You wait ...and wait and suddenly the scan is taken. And than you wait again before you get the result.
For me its Ok because i don't need it daily. I have a Mediapad with BAH-L09.
 

Sillyw4lks

Member
Nov 7, 2011
38
8
Hi I just received an untouched BAH-W09. No idea how to unlock bootloader. I've seen that you need to pay to do that. Any solution? Thanks.
 
Yes, you can't save pictures. But often camera works in apps to get QR codes. I'm using it with banking app and SecScanQR app or with Signal for desktop. The only problem is, its working in "slow motion ". You wait ...and wait and suddenly the scan is taken. And than you wait again before you get the result.
For me its Ok because i don't need it daily. I have a Mediapad with BAH-L09.
Camera works in landscape with PWR & VOL up top and fingerprint sensor on the right.
 
Hey OP i was wondering how you got the kernel
If you read these threads about and for this device you will see it's history. He put in a metric buttload of work. I'm not looking at version number right now but Huawei dropped it at nougat. You can get nougat kernel source on line but then you would need thousands of hours to bring it to where it is. Go back and look at all of his posts for this device, the number of patches and commits is insane.
 
  • Like
Reactions: surdu_petru

Callor

New member
Nov 4, 2021
2
0
Hello, I need help saving my m3 lite 10 mediapad, I'm trying to upload TWRP and I get something from CMD, if I run TWRP, this problem appears. What am I doing wrong? Can anyone help me?
 

Attachments

  • IMG_20211106_101907.jpg
    IMG_20211106_101907.jpg
    4.8 MB · Views: 29
  • IMG_20211106_101144.jpg
    IMG_20211106_101144.jpg
    2.1 MB · Views: 28
  • IMG_20211106_101202.jpg
    IMG_20211106_101202.jpg
    2.1 MB · Views: 29
Hello, I need help saving my m3 lite 10 mediapad, I'm trying to upload TWRP and I get something from CMD, if I run TWRP, this problem appears. What am I doing wrong? Can anyone help me?
try it by booting from the recovery partition instead of booting the image on your PC. if you've already flashed it there is no point in just booting the image. We use the fastboot boot command to prevent altering device partitions, obtaining backup and for testing. I've not tried it but don't think you can install zips that will alter the device when booted to an external recovery.img even if it's the same as the one on the device. Try rebooting recovery and see what you get.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 21

    LOS.png


    Please note that this ROM is one of my side projects, for which I could provide zero warranty. By installing this ROM, you acknowledge that you take all the risks that come with installing custom firmwares on your devices, including but not limited to bricking your device, losing your data, etc.


    Devices Supported :

    Huawei MediaPad M3 Lite 10 :

    BAH-AL00/BAH-L01/BAH-L09/BAH-W09

    Huawei MediaPad M3 Lite 8 :
    CPN-AL00/CPN-L0J/CPN-L09/CPN-W09



    About LineageOS:

    LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.



    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    *


    Warning !
    Installing a custom ROM on your device can sometimes be difficult and also with unwanted consequences! Therefore, make sure that you understand exactly what risks this operation entails - you are the only one responsible for all actions taken on your device.



    Downloads:

    lineage-16.0-20190822-UNOFFICIAL-bach.zip


    lineage-16.0-20191112-UNOFFICIAL-bach.zip


    GApps : ARM64 - Android 9.0 - your choice ( recomanded : mini/micro or nano ) !



    Instructions:

    1. unlock bootloader & install TWRP 3.2.0-0
    2. plug USB cable to your Desktop/Laptop for copy files ( or add them to a external storage/microSD card )
    3. take a backup
    4. format /data
    5. reboot device again to TWRP to be able to use /data
    6. Wipe all apart External Storage
    7. copy LOS16.0 ROM & GApps to Internal/External Storage ***
    8. go to Install -> check the LOS zip file
    9. Add more Zips
    10. check GApps zip file
    11 Swipe to confirm Flash
    12. Wipe cache/dalvik -> Swipe to Wipe
    13. Reboot System
    14. Enjoy !
    15. Later you can install the new TWRP 3.3.1-0 !

    *** if you flash this ROM for the first time, please install 20190822 version & GApps &
    complete the full settings of GApps, in order to be able to update your device to the last LOS 16.0 ROM !
    You can update to the last ROM available by dary flash !



    What's working | Not working

    *Please check the second post !


    Credits:

    LineageOS Team

    Greg Kroah-Hartman for keep alive 3.18.y kernel !




    Kernel Source Code : android_kernel_huawei_bach Branch: pie !


    Screenshots :

    Screenshot-20190704-205419-Trebuchet.png
    Screenshot-20190704-205432-Trebuchet.png



    Screenshot-20190704-205442-Settings.png
    Screenshot-20190704-205458-Settings.png




    Best Regards !
    5
    Antutu v7.2.2

    AnTuTu Benchmark v7.2.2 on

    Huawei-M3-Lite.jpg


    final score :

    Screenshot-20190704-221013-An-Tu-Tu-Benchmark.png
    5
    New Update LOS 16.0 12/11/2019 !

    Hello !

    As I already announced, today I present a new update of LOS 16.0 ( Android Pie ) for our device !

    ( Please check OP for downloads )


    ChangeLog :

    * update security patch level to November 5, 2019
    * removed SIM support for all devices which are wifi only
    * added Flip Cover support :
    - it will not working for the first time
    - try to open and close the cover, to initialize the sensor
    - in two or three seconds you'll hear a specific sound of the lock screen
    - when you remove the cover, the screen will switch to on automatically - and the device will stay locked .


    Screenshot-20191112-055220-Settings.png



    Best regards !
    4
    What's Working & Not Working on LOS 16.0 !

    Working :
    1. touch display
    2. audio
    3. video
    4. gps
    5. sensors
    6. wifi
    7. wifi/usb/bluetooth hotspot/tethering
    8. bluetooth
    9. data/4G/LTE
    10. fingerprint scanner
    11. video camera recorder


    Still Not Working :
    1. camera ( photo )
    2. we need to use wired or bluetooth headphones to make or receive a call ( the sound on speaker/mic of the tablet seems to be broken )


    Extra feature :
    1. Display Color Calibration using KCAL
    2. custom off mode charging
    3. Flip Cover
    4
    Last Update of LOS 16.0 !!!

    Hello !

    There is a new update of LOS 16.0 for your device into OP !

    This could be also the last update of LOS 16.0 as LOS 17.0 ( Android 10 ) is already running on my device ... and may be the next update of LOS next time !

    ChangeLog :

    * update security patch level to October 5, 2019 !
    * added back multi user account
    * enable surround sound
    * added sustained Performance Mode
    * fixed launcher issue in landscape mode


    Best regards !


    LOS 17.0 Android 10 on MediaPad M3 Lite 10

    Screenshot-20191020-003511-Settings.png