[ROM][9.0][OFFICIAL] Havoc OS v2.9 [WHYRED][30.09.2019]

[Lermite]

After flashing the pie fw and pie fw based rom, you flashed oreo fw? Does it boot? Im on Havoc 2.5 but because of some issues on pie fw, Im stock at oreo fw

A Pie firmware is required to install a Pie rom.
After the rom is installed, an Oreo firmware can be installed but an Oreo kernel is necessary for the system to boot and work properly.

 

[kimpot04]

A Pie firmware is required to install a Pie rom.
After the rom is installed, an Oreo firmware can be installed but an Oreo kernel is necessary for the system to boot and work properly.

Oh, okay. Got it. Thanks for the new info. Does some kernel developers still support oreo fw?

 

[Lermite]

Does some kernel developers still support oreo fw?

I couldn't list all the kernels actually compliant with an Oreo firmware.
I assume the compliant versions are pretty old, but this doesn't mean they don't work fine.
I'm running with KangarooX r4.4 EAS OC which works perfectly.

 

[OmnioPT]

Oh, okay. Got it. Thanks for the new info. Does some kernel developers still support oreo fw?

Ancient Kernel stills support oreo fw!

 

[soulstormfan]

After flashing the pie fw and pie fw based rom, you flashed oreo fw? Does it boot? Im on Havoc 2.5 but because of some issues on pie fw, Im stock at oreo fw

It boots but you need to install oreo kernel too. Otherwise bootloop. Whoops didnt see you got an answer already

 

[Lermite]

Updating Magisk from 19.3 to 20, the last stable version, messed up badly with my phone.
It booted but all the system settings were reset: Wifi networks, permissions, notifications,... everything went away.

I assume this issue must be linked to my twisted setup, mixing an Oreo firmware and kernel with a Pie rom.

That's why I advise to avoid Magisk 20 to whoever runs with a mixed Oreo/Pie stuff.

 

[kemdroid]

Thanks for sharing, and i always following what have you done. But i faced slow charging. Its only around 850 mah- 1200 mah. But before in kangaroo 5.3 non oc , i got 1700 mah. How to get fast charge on kangaroo r.4.4 eas non uc, fimrware 10.3.4 and latest havoc.?
And did you face this problem too?

Try IceCold latest. Thank me later.

 

[Kousei Arima]

Updating Magisk from 19.3 to 20, the last stable version, messed up badly with my phone.
It booted but all the system settings were reset: Wifi networks, permissions, notifications,... everything went away.

I assume this issue must be linked to my twisted setup, mixing an Oreo firmware and kernel with a Pie rom.

That's why I advise to avoid Magisk 20 to whoever runs with a mixed Oreo/Pie stuff.

I am running v20 fine with mixed setup no. problems here, i upgraded from 19.4 btw, if that helps

 

[Lermite]

I am running v20 fine with mixed setup no. problems here, i upgraded from 19.4 btw, if that helps

I've tried again to install Magisk 20 and it went fine this time.
I have no clue what went wrong the first time. That'll probably remain a mystery.

 

[Kousei Arima]

I've tried again to install Magisk 20 and it went fine this time.
I have no clue what went wrong the first time. That'll probably remain a mystery.

Lol happens sometimes, maybe oreo fw needs reinstall to adapt or something

 

[kimpot04]

I couldn't list all the kernels actually compliant with an Oreo firmware.
I assume the compliant versions are pretty old, but this doesn't mean they don't work fine.
I'm running with KangarooX r4.4 EAS OC which works perfectly.

Another question. Is the latest havoc os stable?

 

[Lermite]

Another question. Is the latest havoc os stable?

Yes, it is.

 

[///Manuel]

Hi there, new to Havoc, great ROM, thanks! One issue I have is that the Gestures Anywhere trigger section (on the edge) seems to be moving sometimes so I need to reset it in settings.
Other than that, all is well. Like the customization of desktop, status bar, etc.

 

[kimpot04]

Yes, it is.

Last favor mate. I can't find links on kangaroox r4.4. does 4.8 supports oreo?? if no, can you provide links or upload your kernel? thanks alot

 

[Lermite]

Last favor mate. I can't find links on kangaroox r4.4. does 4.8 supports oreo?? if no, can you provide links or upload your kernel? thanks alot

Here are the KangarooX kernels: https://drive.google.com/drive/folders/1dS2FDqGdS4i5LXEXCVvFWnvtrgBZmuGv
Mine is "KangarooX-EAS-r4.4-OC.zip".
I'm not sure it's the latest version that supports Oreo, but it probably is

 

[ichal619]

Can i flash in miui 9 oreo?
Thanks ??

 

[kimpot04]

Updating Magisk from 19.3 to 20, the last stable version, messed up badly with my phone.
It booted but all the system settings were reset: Wifi networks, permissions, notifications,... everything went away.

I assume this issue must be linked to my twisted setup, mixing an Oreo firmware and kernel with a Pie rom.

That's why I advise to avoid Magisk 20 to whoever runs with a mixed Oreo/Pie stuff.

Maybe kernel? I followed your instruction on flashing pie fw, oreo and oreo kernel. I tried first the purecaf. and updated magisk to v20, nothing happens. still the same. not sure about that.

 

[Lermite]

Can i flash in miui 9 oreo?

If you're talking about the kernel KangarooX r4.4, yes, you can install is with MIUI Oreo but I don't know it everything would work flawlessly with it because I've only tested with Havoc OS 2.9.

Maybe kernel? I followed your instruction on flashing pie fw, oreo and oreo kernel. I tried first the purecaf. and updated magisk to v20, nothing happens. still the same. not sure about that.

I still don't know why my first attempt failed. The only possible explanation I can imagine so far is that I wiped something that shouldn't have been instead of wiping only Cache + Dalvik.
As my second attempt went fine, this failure will stay without final explanation.

BTW, the calibration of my battery went wrong again but I believe it's caused by the full restore from the recovery because the phone ends up with a different battery level than the backup's one, and it could have mess with the battery stats.
Recalibrating the battery after each full restore is apparently a good thing.

 

[ichal619]

If you're talking about the kernel KangarooX r4.4, yes, you can install is with MIUI Oreo but I don't know it everything would work flawlessly with it because I've only tested with Havoc OS 2.9.


I still don't know why my first attempt failed. The only possible explanation I can imagine so far is that I wiped something that shouldn't have been instead of wiping only Cache + Dalvik.
As my second attempt went fine, this failure will stay without final explanation.

BTW, the calibration of my battery went wrong again but I believe it's caused by the full restore from the recovery because the phone ends up with a different battery level than the backup's one, and it could have mess with the battery stats.
Recalibrating the battery after each full restore is apparently a good thing.

I'm sorry,,i mean this cusrom

 

[maharshpatel]

I am using Havoc v2.9 with no magisk module and no custom kernel.

PMGC_7.0.009_FinalBuild_V14 gcam crashes while launching. Is any one facing same issues?

Ps: Camera2api enabled


And please suggest any latest gcam which works perfectly with our devices using this rom. And front flash too for selfies ?