[ROM][9.0][OFFICIAL] LineageOS 16.0 for Wileyfox Storm

[jrior001]

[ROM][9.0][OFFICIAL] LineageOS 16.0 for Wileyfox Storm

[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */[/COLOR]

Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.

More detailed instructions at:
Install LineageOS on kipper
IF YOU ARE CURRENTLY RUNNING LINEAGE 15.1 w/ENCRYPTION A FULL DATA FORMAT WILL BE REQUIRED TO MOVE TO 16.0. AN ISSUE WITH ENCRYPTION WAS FOUND IN 15.1 THAT CANNOT BE CORRECTED WITHOUT A FULL FORMAT

Official Download link:
LineageOS Downloads

Recommended Google Apps package:
Open GApps (choose the variant you want)

Changelog:
Changes for kipper

Bug reports:
How to submit a bug report

Donate to support development:
Donate via PayPal to jrior001
Donate via PayPal to LineageOS

XDA:DevDB Information
LineageOS, ROM for the Wileyfox Storm

Contributors
jrior001, mikeioannina
Source Code: https://github.com/LineageOS

ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x

Version Information
Status: Nightly

Created 2019-04-15
Last Updated 2019-04-15

 

[ghertas]

great job

i haven't seen any problem on the first build

 

[RastHacker]

Brievly tested first build and not very good performance, i've not tested all things cause was laggy.

HUGE THANKS to compile android 9 ;D

---------- Post added at 03:08 PM ---------- Previous post was at 03:07 PM ----------

Brievly tested first build and not very good performance, i've not tested all things cause was laggy.

HUGE THANKS to compile android 9 ;D

i'll continue to test and send feedback

 

[RastHacker]

I have testes android 9 on multiple devices like galaxy tab a, redmi 5 plus, one plus 5t and elderdriver's xposed work great but not on wileyfox storm. Someone can telle me why?

When i reboot with xposed installed it make a blackscreen but phone is booted.

 

[ghertas]

I have testes android 9 on multiple devices like galaxy tab a, redmi 5 plus, one plus 5t and elderdriver's xposed work great but not on wileyfox storm. Someone can telle me why?

When i reboot with xposed installed it make a blackscreen but phone is booted.

did you Wipe and Format Data ?

Installing LineageOS from recovery

  Wipe

    Now tap Format Data and continue with the formatting process. This will remove encryption as well as delete all files stored on the internal storage.

    Return to the previous menu and tap Advanced Wipe.

    Select the Cache and System partitions to be wiped and then Swipe to Wipe.

https://wiki.lineageos.org/devices/kipper/install

---------- Post added at 09:39 PM ---------- Previous post was at 09:36 PM ----------




Changes included in lineage-16.0-20190507-nightly-kipper

RotationPolicy: Don't crash if configstore 1.1 isn't available
android_frameworks_base

 

[RastHacker]

I'll try

 

[vel_tins]

For some reasons, the /system partition is resized from ~2.5GB to ~1.5GB after install, so not even the nano-gapps fit (insufficient space).
The /system partition can be "resized" back to 2.5GB via TWRP (you have to do it twice(!) to see the result), but I think, this shouldn't be hard to fix...

 

[RastHacker]

did you Wipe and Format Data ?



https://wiki.lineageos.org/devices/kipper/install

---------- Post added at 09:39 PM ---------- Previous post was at 09:36 PM ----------




Changes included in lineage-16.0-20190507-nightly-kipper

Magisk say my data is not encrypted, i really need to format data?

 

[vel_tins]

After updating to "lineage-16.0-20190513-nightly-kipper", the /system partition was against decreased to ~ 1.5GB and had to be increased to 2.5GB from TWRP!
Screenshots:
Original size, before installing (or after resizing)

After installing LOS 16:

 

[RastHacker]

my device couldn't find my tv via the cast

You're not connected to internet it's normal. Connect before to same wifi network as your tv

 

[ghertas]

You're not connected to internet it's normal. Connect before to same wifi network as your tv

nothing

I can't find a refresh button to refresh the cast page to find my tv
i think the cast is not in the lineage rom package (kipper)

 

[RastHacker]

nothing

I can't find a refresh button to refresh the cast page to find my tv
i think the cast is not in the lineage rom package (kipper)

You're tv created an other network named by your tv, it's look like "Bravia-XXXX" for sony and other for other brands. Connect to this network and now you can cast

 

[jrior001]

nothing



I can't find a refresh button to refresh the cast page to find my tv

i think the cast is not in the lineage rom package (kipper)

Wifi-direct casting does not work at all in 16.0 for most legacy devices. You can still cast to Chromecast devices but that's about it. Unfortunately I don't see this getting fixed at all as the back end for WFD changed quite a bit in P and only newer devices (with at least stock O blobs) have been able to get this working.

Sent from my Mi MIX 2S using Tapatalk

 

[hjr06]

I have testes android 9 on multiple devices like galaxy tab a, redmi 5 plus, one plus 5t and elderdriver's xposed work great but not on wileyfox storm. Someone can telle me why?

When i reboot with xposed installed it make a blackscreen but phone is booted.

Hi,
have the same problem on my Wileyfox Storm (arm64-v8a) with Pie (OS only - no other apps installed jet) I installed.
I have testet every up to now available pie version for Storm.
Magsik v19.1 with Magisk Manager v7.1.2 (also tried v18.1 and v7.1.1)
Riru core 18 (also tried v10, v11, 15, 16)
EDXposed v4.1.2 (also tried v3.1.2, v3.1.7 and v2.9.6)
EdXposedInstaller_v2.2.4 (also tried some other Versions)
I also tried different Lineage Pie versions.
The Problem: immediatly after the boot is finished the ui becomes black and freezes completly.
For a second I could see the message Smartphone ist starting, but then it becomes black screen.
About very 5 seconds the screen flashes very short the status bar and becomes black again - seems to be a loop.

one Time, after wiping all partitions and installing lineage from scratch Xposed seems to be running fine,
but after the first boot I have the same problem.
In all cases - after removing EDXposed via TWRP Pie works fine again, but I need Xposed.
Please anybody can help?

Thanks

 

[RastHacker]

Hi,
have the same problem on my Wileyfox Storm (arm64-v8a) with Pie (OS only - no other apps installed jet) I installed.
I have testet every up to now available pie version for Storm.
Magsik v19.1 with Magisk Manager v7.1.2 (also tried v18.1 and v7.1.1)
Riru core 18 (also tried v10, v11, 15, 16)
EDXposed v4.1.2 (also tried v3.1.2, v3.1.7 and v2.9.6)
EdXposedInstaller_v2.2.4 (also tried some other Versions)
I also tried different Lineage Pie versions.
The Problem: immediatly after the boot is finished the ui becomes black and freezes completly.
For a second I could see the message Smartphone ist starting, but then it becomes black screen.
About very 5 seconds the screen flashes very short the status bar and becomes black again - seems to be a loop.

one Time, after wiping all partitions and installing lineage from scratch Xposed seems to be running fine,
but after the first boot I have the same problem.
In all cases - after removing EDXposed via TWRP Pie works fine again, but I need Xposed.
Please anybody can help?

Thanks

There is news, i finally booted with xposed 4.x elderdriver version sandhook, edxposed manager say it's working and active but any modules seems to work, they say 'module not active' even if it is. :/ and phone is laggy. (sorry for my english)

 

[Jim Ford]

I can't install TWRP.
When I try to flash the image I get:
fastboot flash recovery twrp-3.2.3-20190306-kipper.img
target reported max download size of 268435456 bytes
sending 'recovery' (30096 KB)...
OKAY [ 0.976s]
writing 'recovery'...
OKAY [ 0.385s]
finished. total time: 1.361s

Which seems far too quick to transfer 30 Meg.

Then when I do <fastboot boot twrp-3.2.3-20190306-kipper.img>:
I get:downloading 'boot.img'...
OKAY [ 0.981s]
booting...
FAILED (remote: dtb not found)
finished. total time: 1.244s

I'd be grateful for some hand-holding, please!

Jim

 

[krustyzy]

For some reasons, the /system partition is resized from ~2.5GB to ~1.5GB after install, so not even the nano-gapps fit (insufficient space).
The /system partition can be "resized" back to 2.5GB via TWRP (you have to do it twice(!) to see the result), but I think, this shouldn't be hard to fix...

This doesn't work for me. I'm on TWRP 3.2.1.0 and whenever I let /system be resized, nothing changes.

The image has been installed by ADB Sideload. I also have rebooted the device to recovery multiple times, but the resize-operation doesn't show any results.

Sent from my Redmi Note 4 using Tapatalk

 

[methuselah]

EDIT

 

[1f5]

The Download-Link does not work any more? Where can i download the latest ROM?
I get that its not supported any more, but thats no reason to remove old downloads.