[ROM][9.0][SANDERS] Pixel Experience [AOSP][r21][2018/12/04][OFFICIAL][TREBLE]

Status
Not open for further replies.
Search This thread

sbcontt

Senior Member
Dec 3, 2011
206
36
So I just installed this ROM and it is asking for a password. I have provided both my phone password and my Google password. None worked.

I checked the /data/system folder and there is no password file. Please tell me what the default password is.

---------- Post added at 05:21 PM ---------- Previous post was at 05:08 PM ----------

Hi all. Like some of you here, I had the phone asking for password after flashing the 20190315 update. On flashing 20190216, this wasn't happening. Here's what I did to resolve this.

Backup everything in your Data partition if you want to keep your apps etc.

1. Boot to recovery (I have 3.2.1-r22 treble)
2. Go to Wipe and tap on Format Data. Type yes at the prompt. Format completes with error 255.
3. Repeat step 2. This time the data partition should be formatted.
4. Your data partition is now decrypted and you'll be able to boot into System.

I hope it helps someone.

This formats the entire internal storage.

I don't understand why Android is so adamant about its stupid enctyption stuff. After unlocking the BL, all encryption should get disabled because there is no real point.

---------- Post added at 05:52 PM ---------- Previous post was at 05:21 PM ----------

Flash Fingerprint firmware with rom..maybe your bootloader is naught base

What is a fingerprint firmware and where do I get it?

---------- Post added at 06:02 PM ---------- Previous post was at 05:52 PM ----------

If you are coming from stock rom, then your data is encrypted. You have to flash verity disabler zip(name the file verity) when you boot into twrp,flash it before booting to system. Also, you can only flash magisk v14,as after that version, vendor partition is needed by magisk which will be available only if you use treble twrp.
Verity disabler zip:-
https://www.google.com/amp/s/forum....niversal-dm-verity-forceencrypt-t3817389/amp/

---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------


There is one problem with this twrp,it is not treble enabled,which means it doesn't have vendor partition,which means you can't install magisk after v14,which means you can't root

---------- Post added at 08:53 PM ---------- Previous post was at 08:47 PM ----------
@rdjr5 ,i suppose that the twrp that you have provided is r22.
There is a bug in this twrp(maybe only i am facing it)(i have tried reflashing twrp with pc).nand backup is made succesfully,but when i tried to restore it,everything restored except system image.it gives an error "cannot mount system(invalid argument)" ,i finally managed to restore my backup by using twrp r20 to restore system and system image and everything else with twrp r22(treble)...plz do the need full..thanks:)
Also can anyone else confirm this problem,it would be really helpful


This should be at the top and pinned.

Right now I am going through a fever in the middle of heatwave... completely dry and agitated. I don't have the patience for the typical open source drama of documentation always being outdated.

Also, can you please help me with the fingerprint firmware? Where do I get it? And where to get treble supported version of TWRP for this phone?

First it needed VOLTE fix, then I hadf to get the verity fix. And I am still searching for fingerprint and treble fix. Why aren't these thing sincluded in this ROM or at least linked in the OP? Is it too much to expect a treble ROM to come with Treble TWRP?

Edit: Got link of treble TWRP from a comment on the TWRP thread for this phone.

Edit: I flashed fsg and adspso from the stock ROM I have (SANDERS_NPS26.116-26_cid50) and it didn't help with the fingerprint issue.
 
Last edited:

Stud12376

Senior Member
Oct 24, 2016
686
260
19
New Delhi
So I just installed this ROM and it is asking for a password. I have provided both my phone password and my Google password. None worked.

I checked the /data/system folder and there is no password file. Please tell me what the default password is.

---------- Post added at 05:21 PM ---------- Previous post was at 05:08 PM ----------



This formats the entire internal storage.

I don't understand why Android is so adamant about its stupid enctyption stuff. After unlocking the BL, all encryption should get disabled because there is no real point.

---------- Post added at 05:52 PM ---------- Previous post was at 05:21 PM ----------



What is a fingerprint firmware and where do I get it?

---------- Post added at 06:02 PM ---------- Previous post was at 05:52 PM ----------



This should be at the top and pinned.

Right now I am going through a fever in the middle of heatwave... completely dry and agitated. I don't have the patience for the typical open source drama of documentation always being outdated.

Also, can you please help me with the fingerprint firmware? Where do I get it? And where to get treble supported version of TWRP for this phone?

First it needed VOLTE fix, then I hadf to get the verity fix. And I am still searching for fingerprint and treble fix. Why aren't these thing sincluded in this ROM or at least linked in the OP? Is it too much to expect a treble ROM to come with Treble TWRP?

Edit: Got link of treble TWRP from a comment on the TWRP thread for this phone.

Edit: I flashed fsg and adspso from the stock ROM I have (SANDERS_NPS26.116-26_cid50) and it didn't help with the fingerprint issue.
Use telegram,there are g5s plus groups present,where every fix,rom,etc are pinned.
 

AadityaB

Member
Jan 23, 2018
18
2
Pune
BATTERY DRAIN AND PHONE HEATING in new updated version (28/05/2019). App load time is slowler than April version. Apk installation also takes a lot of time sometimes. Guess this is related to kernel. Extreme plus was better than LIT kernel i think.
 

Stud12376

Senior Member
Oct 24, 2016
686
260
19
New Delhi
BATTERY DRAIN AND PHONE HEATING in new updated version (28/05/2019). App load time is slowler than April version. Apk installation also takes a lot of time sometimes. Guess this is related to kernel. Extreme plus was better than LIT kernel i think.
That apk load time might be related to cache,you must have cleared cache in recovery,so after 3-4 days app loading time will return to normal
 
  • Like
Reactions: AadityaB

sbcontt

Senior Member
Dec 3, 2011
206
36
WiFi keeps dropping

Please help me. Wifi keeps dropping again and again. Here is my logcat:

Code:
[06-06 20:31:51.703 20311:20311 F/linker]
CANNOT LINK EXECUTABLE "/vendor/bin/wifidisplayhalservice": cannot locate symbol "_ZN11CWFD_HdcpCp19m_eHdcpSessionStateE" referenced by "/vendor/lib/libwfdmodulehdcpsession.so"...

[06-06 20:31:54.324 2087:2216 D/QCNEJ]
|CORE| Updating RSSI: -78

[06-06 20:31:56.719 20316:20316 F/linker]
CANNOT LINK EXECUTABLE "/vendor/bin/wifidisplayhalservice": cannot locate symbol "_ZN11CWFD_HdcpCp19m_eHdcpSessionStateE" referenced by "/vendor/lib/libwfdmodulehdcpsession.so"...

[06-06 20:31:57.366 2087:2216 D/QCNEJ]
|CORE| Updating RSSI: -77

[06-06 20:31:57.941 1375:1401 E/LightsService]
Light requested not available on this device. 2

[06-06 20:31:58.555 538:538 E/WifiHAL]
Packet monitoring is not yet triggered

[06-06 20:31:58.557 1375:1731 E/WifiVendorHal]
getTxPktFates(l.2219) failed {.code = ERROR_NOT_AVAILABLE, .description = }

[06-06 20:31:58.558 538:538 E/WifiHAL]
Packet monitoring is not yet triggered

[06-06 20:31:58.559 1375:1731 E/WifiVendorHal]
getRxPktFates(l.2261) failed {.code = ERROR_NOT_AVAILABLE, .description = }

[06-06 20:32:01.718 20318:20318 F/linker]
CANNOT LINK EXECUTABLE "/vendor/bin/wifidisplayhalservice": cannot locate symbol "_ZN11CWFD_HdcpCp19m_eHdcpSessionStateE" referenced by "/vendor/lib/libwfdmodulehdcpsession.so"...

[06-06 20:32:04.908 10075:10098 D/GeckoMemoryMonitor]
Decreased memory pressure to 2

[06-06 20:32:06.727 20322:20322 F/linker]
CANNOT LINK EXECUTABLE "/vendor/bin/wifidisplayhalservice": cannot locate symbol "_ZN11CWFD_HdcpCp19m_eHdcpSessionStateE" referenced by "/vendor/lib/libwfdmodulehdcpsession.so"...

[06-06 20:32:09.567 538:25790 E/WifiHAL]
Received fatal event, sending alert

[06-06 20:32:10.814 1375:1718 E/LightsService]
Light requested not available on this device. 2

[06-06 20:32:11.729 20324:20324 F/linker]
CANNOT LINK EXECUTABLE "/vendor/bin/wifidisplayhalservice": cannot locate symbol "_ZN11CWFD_HdcpCp19m_eHdcpSessionStateE" referenced by "/vendor/lib/libwfdmodulehdcpsession.so"...

[06-06 20:32:13.782 1375:6681 D/WificondControl]
Scan result ready event

[06-06 20:32:14.536 25742:25742 E/wpa_supplicant]
nl80211: Failed to open /proc/sys/net/ipv4/conf/wlan0/drop_unicast_in_l2_multicast: No such file or directory

[06-06 20:32:14.536 25742:25742 E/wpa_supplicant]
nl80211: Failed to set IPv4 unicast in multicast filter

[06-06 20:32:14.538 538:538 E/WifiHAL]
Packet monitoring is not yet triggered

[06-06 20:32:14.538 1375:1731 E/WifiVendorHal]
getTxPktFates(l.2219) failed {.code = ERROR_NOT_AVAILABLE, .description = }

[06-06 20:32:14.541 538:538 E/WifiHAL]
Packet monitoring is not yet triggered

[06-06 20:32:14.541 1375:1731 E/WifiVendorHal]
getRxPktFates(l.2261) failed {.code = ERROR_NOT_AVAILABLE, .description = }

[06-06 20:32:14.542 1375:1731 E/WifiVendorHal]
stopRssiMonitoring(l.2404) failed {.code = ERROR_NOT_AVAILABLE, .description = }

[06-06 20:32:14.545 1375:1738 D/ConnectivityService]
NetworkAgentInfo [WIFI () - 135] EVENT_NETWORK_INFO_CHANGED, going from CONNECTED to DISCONNECTED

[06-06 20:32:14.545 1375:1738 D/ConnectivityService]
NetworkAgentInfo [WIFI () - 135] got DISCONNECTED, was satisfying 14

[06-06 20:32:14.546 1375:25791 D/DhcpClient]
doQuit

[06-06 20:32:14.547 2087:2216 D/QCNEJ]
|CORE| Wifi Info Reset

[06-06 20:32:14.549 1375:1731 D/WifiStateMachine]
WifiStateMachine: Leaving Connected state

[06-06 20:32:14.552 2087:2216 D/QCNEJ]
|CORE| Wifi Info Reset

[06-06 20:32:14.553 1375:1731 D/WifiCountryCode]
Succeeded to set country code to: IN

[06-06 20:32:14.556 1375:1731 D/WifiNetworkAgent]
NetworkAgent: NetworkAgent channel lost

[06-06 20:32:14.578 1375:1738 D/ConnectivityService]
Sending DISCONNECTED broadcast for type 1 NetworkAgentInfo [WIFI () - 135] isDefaultNetwork=true

I am on XT1804 PixelExperience-20190528-2128-OFFICIAL

Edit: Hope I am posting on the correct thread this time. Had posted this twice on wrong threads.
 
Last edited:

sbcontt

Senior Member
Dec 3, 2011
206
36
I'm on the 15/12 build & conference call works fine for me, wifi has some bugs. it connects then disconnects then again connect n this continues.


Did you find a fix for Wifi problem? I am having the same issue.

---------- Post added at 01:23 PM ---------- Previous post was at 01:20 PM ----------

you also should share chirayu's version of extreme plus, for those who WiFi doesn't work on perf, it has focus and WiFi working correctly :D

Does that patch still apply to the latest version of this ROM?
 

Luthium

Member
Apr 19, 2011
13
3
Martinez
Hi i'm having freezes with Google play Store Sincé a week ago and i can't find relative info. It opens and freezes automaticaly. Can someone help me with this issue?
 

vikas1111111

Member
Jun 5, 2019
11
0
Thanks for the ROM?. Everything works great. Fluid experience. I come across few problems with GPS. GPS don't pin point the location. Also when I try to use both GPS and hotspot, hotspot ran into some errors. Please provide me a solution.
 

vikaz

Member
Feb 18, 2018
12
0
Great work dev everything works fine!
but there is some VOLTE problems,i flashed bholtefix but volte is not working.
Here is my problem~
I can access internet by my primary sim but not able to do calls(VOLTE)and secondary sim is able to do calls(2G/3G) but can't access internet.:confused:
please,help me!:rolleyes:
I don't want to flash another rom!:(

Edit~
I fixed it by flashing the stock rom and then aging flashing pixel rom.
 
Last edited:

DemiBaby

Member
May 14, 2018
19
4
Anyone had sissue when recording video ? Got freeze after 15sec and got massage " mic is already using with another program"
Using this mod
MGC_6.1.021_Potter_v5F-san1ty.apk
 

srchauhan

Member
Apr 2, 2013
11
1
Ahmedabad
Encryption not working

hi, great work thank you first.

while enabled hardware encryption, it goes in to boot loop ... is it something broken. please confirm
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 32

    GtwTyCR.png

    PixelExperience for Moto G5S PLUS [sanders]

    What is this?
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device

    Based on Android 9.0


    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    FMRadio
    Fingerprint reader
    NFC
    Lights
    Sound / vibration
    Facelock


    Known issues
    Nothing

    DON'T FLASH GAPPS, ALREADY INCLUDED
    Download from Pixel Experience website

    Donate
    Liked my work? Give me a beer

    Translation
    Help with project translation

    Telegram channel
    Stay tuned


    XDA:DevDB Information
    Pixel Experience Pie, ROM for the Moto G5S Plus

    Contributors
    rdjr5
    Source Code: https://github.com/PixelExperience

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: Treble TWRP, Unlocked Bootloader
    Based On: AOSP

    Version Information
    Status: Stable

    Created 2018-12-06
    Last Updated 2018-12-22
    15
    Treble TWRP
    https://drive.google.com/file/d/1lXG--4M_CCh_fWNFpwdR0bNagT2gFgOd/view?usp=drivesdk

    First build [12/05]
    Changelog:
    -Fully Treble build
    -Default Exterme Plus Kernel
    -Upstream to 3.18.128
    -Fix MotoActions For Full-Treble builds

    New update here [12/15]
    Changelog:
    - Latest Sources
    - Safety net fixed
    - Kernel upstreamed to .129
    - Fixed gcam focus

    New update [12/21]
    Changelog:

    - Default kernel perf
    - Kernel Upstreamed to .130
    - Video fixed
    - Volte fixed
    - More changes

    New update [12/22]
    Changelog:
    - Kernel upstreamed to .131
    - Slo-Mo works with Urnyx cam
    - Lag issue solved


    Note : First boot may be laggy so reboot it once.
    CLEAN FLASH NEEDED

    New update [12/28]
    Changelog:
    - Default kernel Extreme Plus
    - Upstreamed to .131
    - Ambient Play Improved

    New update [01/09]
    Changelog:
    - Maintainer changed
    - Switched to perf kernel(focus fixed)
    - New tress
    - January patch
    6
    New update here [12/15]
    Changelog
    - Latest Sources
    - Safety net fixed
    - Kernel upstreamed to .129
    - Fixed gcam focus

    Link -
    https://download.pixelexperience.org
    4
    Rom is smooth, fast and stable. my only two issues are - 1) google assistant is not working for me when I long press the home button - 2) and I can't find an option in the settings menu to hide the navigation bar.
    Google assistant works properly.

    To hide navabar flash this...
    This enables eis, fixes safety net & hides navigation bar
    https://drive.google.com/file/d/1Q9N3kI5hLGGKCNT_1WHqrEEAqoFmYh3u/view?usp=drivesdk
    4
    For Everyone Using PE Latest Or Any Build, Flash The Following :

    1. For Passing safety net, flash this file - PE-20190109-SafetyNetFix.zip

    2. For Passing safety net as well as disabling navbar, flash this file - PE-20190109-SafetyNetFix-DisableNavbar.zip

    It's for January patch update, but can be flashed on any PE for passing safety net..