[ROM][9.0][UNOFFICIAL] [G800F/M/Y] LineageOS 16.0 [Beta] [16-12-2020]

[Pokemetti2]

It had to add some extra battery drain I imagine. As far as adding a switch, I mean anything is possible, but I wouldn't hold your breath [emoji3]
I don't particularly like the idea of editing the LOS sources to achieve this.

Ok, didn't think about that. Maybe implementing it with sysfs would be easier? Only kernel source would have to be changed for that.

 

[spookcity138]

Updated

Changelog

* Synced LOS sources
* Latest security patches (July 2020)

Enjoy :good:

 

[ryd.or.die.278]

camera/flaslight issues

throughout the last 3 lineage versions ive had occasional issues with camera not working or flash not working, Tried clean flashing/wiping alsorts etc, BUT after removing battery and turning phone back on all starts working fine
Hopefully some1 finds that usefull..

 

[Exciter666]

Some days ago I flashed this rom on my S5 Mini and meanwhile everything works fine except the standby mode:
the display keeps activating by itself from time to time for few (1-5) seconds without touching the phone.

I already tried to disable app messages, active display and so on.
How / where can I find the reason for this behaviour and disable it?

 

[Avraham Tsaban]

Some days ago I flashed this rom on my S5 Mini and meanwhile everything works fine except the standby mode:
the display keeps activating by itself from time to time for few (1-5) seconds without touching the phone.

I already tried to disable app messages, active display and so on.
How / where can I find the reason for this behaviour and disable it?

Have you checked wether or not the power button is pressed by the phone case?

---------- Post added at 09:37 AM ---------- Previous post was at 09:00 AM ----------

According to this xda news article, google is going to force using android go on devices lower than 2GB RAM.
Are you going to merge some go properties into this ROM?

 

[Exciter666]

On google I found a hint:

I had the preffered network type set to 2G and this caused the display to be activated for few seconds (somtimes half of a second, sometimes 5 seconds).
I tried LTE and immediately the display was dark until I pushed a button.
Now as I set it back to 2G the display starts to pop up again.

So this behaviour is definetely triggered by the 2G selection in the network menu!

How can this be disabled?
I only need 2G...

 

[Asgabat]

is this LOS overclocked like crdroid to 1.5hz?

 

[spookcity138]

is this LOS overclocked like crdroid to 1.5hz?

No, maybe you can find one of my old kernel zips to flash though. I no longer have any or I'd share.

Sent from my OnePlus 7 using Tapatalk

 

[Asgabat]

No, maybe you can find one of my old kernel zips to flash though. I no longer have any or I'd share.

Sent from my OnePlus 7 using Tapatalk

what should i search for? don't you have overclocked version?

 

[Panzerknakker]

what should i search for? don't you have overclocked version?

https://androidfilehost.com/?fid=8889791610682911822
1,6 GHz

 

[spookcity138]

Updated

IMPORTANT NOTE
The days of my S5 mini are numbered. The screen has been shattered for months,but it now no longer will even power on. What does this mean?
Well,it means I will no longer be able to test the builds I release. I don't particularly like this,but it is what it is. I will continue to update this ROM however. It would be appreciated if after flashing someone would post a reply confirming that it works. Thanks!

Edit:
I was able to get my my mini to stay on long enough to test the builds. Not sure how or why, but either way, confirmed working by me. I can't promise I'll be able to test future builds however as my mini is certainly dying.

Changelog

Synced LOS sources
Latest security patches (August 2020)

Enjoy! :good:

 

[Freddew]

latest TWRP (3.4.0-0) causes errors

It is written in the first post, that you need to use the latest twrp.
I just wanted to give the hint, that this causes errors. I tried the latest 3 micro g builds without sucess.
The 3.3.1-0 version is working fine.

I also can report that the latest build (20200811-microg) is running without issues, BUT iam not a frequent user of this rom, which means that i did not had the time for a stress test.

Since this rom is running so smooth, i will test it as daily driver, so i can say more in the future.

Thank you @spookcity138 for investing quiet a amount of time in this project. Great work! :victory:

 

[spookcity138]

It is written in the first post, that you need to use the latest twrp.

I just wanted to give the hint, that this causes errors. I tried the latest 3 micro g builds without sucess.

The 3.3.1-0 version is working fine.



I also can report that the latest build (20200811-microg) is running without issues, BUT iam not a frequent user of this rom, which means that i did not had the time for a stress test.



Since this rom is running so smooth, i will test it as daily driver, so i can say more in the future.



Thank you @spookcity138 for investing quiet a amount of time in this project. Great work! :victory:

Yes, just checked and there is a new build of TWRP for the mini that I was not even aware of. I'm also using 3.3.1-0.
If I remember I'll update the main post. Thanks for reporting!

Sent from my OnePlus 7 using Tapatalk

 

[Panzerknakker]

Yes, just checked and there is a new build of TWRP for the mini that I was not even aware of. I'm also using 3.3.1-0.
If I remember I'll update the main post. Thanks for reporting!

TWRP 3.4 works for me.

 

[Avraham Tsaban]

TWRP 3.4 works for me.

Is perfect for me too. I use the standard build. Do you?

 

[Pokemetti2]

Where did the download link go? Here is a link to spookcity138's AFH: https://androidfilehost.com/?w=files&flid=64356&sort_by=date&sort_dir=DESC

 

[DoubleNegative]

twrp-3.4.0-0 failed instantly to install lineage-16.0-20200811 with error "failed to create directory /cache/recovery/......."
Straight after wipe.
Luckily twrp includes a clunky file manager to fix this:
I couldn't find a make folder button but /oem was a handy empty directory
copy /oem to /cache/
rename /cache/oem to recovery

Try Install again, worked fine.

 

[milink]

Is any camera application (for example Open Camera) working with latest build?

 

[1Maxnet1]

Is any camera application (for example Open Camera) working with latest build?

Simple Camera by simplemobiletools works great for me on the latest build. It is already included in the ROM since July-build.

https://f-droid.org/de/packages/com.simplemobiletools.camera/

 

[spookcity138]

Updated

NOTE:
All of the fixes and improvements this month (as well as for some time) are thanks to @mongo0. He is doing all of the heavy lifting for our device. I am simply syncing and building updates. So if you are using and enjoying this ROM make sure to show him your appreciation!

Changelog

* Synced LOS sources
* Latest security patches (September 2020)
Kernel:
* Updated some kernel headers
* USB: core: Fix free-while-in-use bug in the USB S-Glibrary
* drivers: usb: core: Minimize irq disabling in usb_sg_cancel()
* drivers: usb: core: Don't disable irqs in usb_sg_wait() during URB submit
* usb: message: Fixed error: 'no space before bracket'
* nl80211: validate beacon head
* cfg80211: Use const more consistently in for_each_element macros
* cfg80211: add and use strongly typed element iteration macros
Device:
* Some WiFi patches/fixes and cleanup
* Added some system props for legacy graphics
* Disabled NearbyMessagesService
* Disabled DiscoveryService
* Disabled wifi MAC randomization
* Updated bluetooth stack cfg
* Removed Wifi display
* Removed creation of /data/misc/dhcp & reintroduced wakelock and others gid for wpa supplicant
* WiFi; added nvram path
* Added audio extended features
* Removed hardcoded p2p configs
* Camera overhaul (according to oneplus3/jf-common)
* Use our samsung_slsi(-cm) repo & enable some exynos hardware features
* Some other tweaks here and there

Enjoy! :good: