[ROM][9.0][UNOFFICIAL] Resurrection Remix v7.0.2 (28 Sep 19) [perseus]

[GVN.Gallus]

Or flash the kernel I posted 2 posts up

I'm sorry to ask but where did that kernel came from? I can't find it on this forum section.

 

[Bobbite]

Or flash the kernel I posted 2 posts up

I have tried but it doesn't install on twrp. And as the post above said, probably shouldn't have tried since I have no idea where that came from.

 

[Bobbite]

The DT2W is still a little temperamental, but also I've got another bug. I keep getting a settings notifications asking me to connect to WiFi to finish setting up the phone, and whenever I do it, it disappears for a little while then comes back.

 

[Browns]

I have tried but it doesn't install on twrp. And as the post above said, probably shouldn't have tried since I have no idea where that came from.

You need to have Magisk installed to flash it. The kernel is shared in the "Mi Mix 3 Global Community" Telegram group. For more info join the group.

 

[Bobbite]

You need to have Magisk installed to flash it. The kernel is shared in the "Mi Mix 3 Global Community" Telegram group. For more info join the group.

I see thank you. I never really use magisk. Can I install it as is or do I need to wipe anything?

 

[Rishabh Dey]

:fingers-crossed:

 

[infeeeee]

I see thank you. I never really use magisk. Can I install it as is or do I need to wipe anything?

I installed this kernel, I don't use d2tw but battery became much better.

My install steps:
- Reboot recovery
- Wipe cache and dalvik/art cache. If you flash something it's recommended to wipe both caches. You don't loose any data by wiping caches
- Flash kernel zip
- Reboot recovery
- Flash magisk v20 from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 select latest stable
- Reboot system

 

[invisiblewave]

I was able to update to the latest build without any wiping or formatting using the following method:

Flash latest ROM, flash gapps (I used stock), boot system.
Reboot recovery.
Flash MIUI camera, flash Magisk 20, boot system.

The critical step was to boot to system before flashing Magisk, otherwise RR won't start.

Thanks @Constrabus, awesome work.

 

[GVN.Gallus]

I was able to update to the latest build without any wiping or formatting using the following method:

Flash latest ROM, flash gapps (I used stock), boot system.
Reboot recovery.
Flash MIUI camera, flash Magisk 20, boot system.

The critical step was to boot to system before flashing Magisk, otherwise RR won't start.

Thanks @Constrabus, awesome work.

You did mention MIUI camera?, Is that stock cam port for custom roms? Can you upload it please!

 

[GVN.Gallus]

I have problem install lastest build 20190928, following these steps:
format data(yes) - reboot twrp - wipe cache, sytem, data - flash firmware (tried 9.6.20 both china and global, 10.3.2.0 both china and global) - flash RR - flash gapps 20190522

Bootloop on MI logo
Coming from MIUI global developer 9.6.27.

Any idea?

 

[ephestione]

I have problem install lastest build 20190928, following these steps:
format data(yes) - reboot twrp - wipe cache, sytem, data - flash firmware (tried 9.6.20 both china and global, 10.3.2.0 both china and global) - flash RR - flash gapps 20190522

Bootloop on MI logo
Coming from MIUI global developer 9.6.27.

Any idea?

Same thing is happening to me, but to be honest, this is the first custom rom I flashed, and before this I couldn't even boot the stock ROM anymore, loop on MI logo once and then back to TWRP for me... so now I'm ROM-less

EDIT: This also happens with the last version before the latest. Also tested without flashing Magisk the first time, as per https://forum.xda-developers.com/showpost.php?p=80751039&postcount=228

 

[ephestione]

SOLUTION
by scavenging around I applied this method: downloaded and flashed latest xiaomi.eu ROM, let it boot and then back to twrp I wiped caches+system+data, then flashed 9.2.15 firmware from https://androidfilehost.com/?fid=1395089523397963751 then flashed 10.3.3.0 firmware from https://xiaomifirmwareupdater.com/archive/firmware/perseus/, then flashed latest RR+ opengapps + magisk, booted fine, then back to twrp flashed xent kernel because you never know. Tomorrow will be the fun day where I am supposed to actually configure this damned phone and make it my daily driver... if only my Mix1 didn't take that bad fall...

 

[GVN.Gallus]

SOLUTION
by scavenging around I applied this method: downloaded and flashed latest xiaomi.eu ROM, let it boot and then back to twrp I wiped caches+system+data, then flashed 9.2.15 firmware from https://androidfilehost.com/?fid=1395089523397963751 then flashed 10.3.3.0 firmware from https://xiaomifirmwareupdater.com/archive/firmware/perseus/, then flashed latest RR+ opengapps + magisk, booted fine, then back to twrp flashed xent kernel because you never know. Tomorrow will be the fun day where I am supposed to actually configure this damned phone and make it my daily driver... if only my Mix1 didn't take that bad fall...

I managed to get it boot too, but by install EU 10.3.2.0, let it boot, reboot twrp, factory reset ( wipe cache, dalvik cache, data), install rom & gapps, boot up, reboot twrp, install magisk.

I did not format data and wipe system and its work.

 

[invisiblewave]

You did mention MIUI camera?, Is that stock cam port for custom roms? Can you upload it please!

It's the Grotesque Walking Stick version. However, it caused problems on this build. I subsequently discovered that it won't start, and it also breaks the other two camera apps (LOS & Google). It worked fine on the previous build, and I'm wondering if it's because I didn't wipe.

---------- Post added at 11:04 AM ---------- Previous post was at 11:02 AM ----------

I managed to get it boot too, but by install EU 10.3.2.0, let it boot, reboot twrp, factory reset ( wipe cache, dalvik cache, data), install rom & gapps, boot up, reboot twrp, install magisk.

I did not format data and wipe system and its work.

+1. The critical step was to boot the rom first without Magisk, then go back to recovery & flash Magisk.

---------- Post added at 11:16 AM ---------- Previous post was at 11:04 AM ----------

SOLUTION
by scavenging around I applied this method: downloaded and flashed latest xiaomi.eu ROM, let it boot and then back to twrp I wiped caches+system+data, then flashed 9.2.15 firmware from https://androidfilehost.com/?fid=1395089523397963751 then flashed 10.3.3.0 firmware from https://xiaomifirmwareupdater.com/archive/firmware/perseus/, then flashed latest RR+ opengapps + magisk, booted fine, then back to twrp flashed xent kernel because you never know. Tomorrow will be the fun day where I am supposed to actually configure this damned phone and make it my daily driver... if only my Mix1 didn't take that bad fall...

It's not the phone, it's the Project Treble configuration. Flashing on any phone is now way more complicated than it used to be. My observation is that the firmware version isn't important with regard to booting (with the exception of the DTBO partition), although it may affect features once running. However, a mis-matched vendor image can cause a bootloop at the bootloader phase (which shouldn't happen now it's bundled in the rom zip), and Magisk can cause a bootloop at the rom booting phase if you don't boot the rom without it first. The other big flashing/booting issue is encryption. Wiping data appears to remove the encryption key, so you end up having to format data every time you wipe (I still have some uncertainty around this as I'm pretty sure I managed to wipe at one point without having to format data again).

 

[infeeeee]

It's the Grotesque Walking Stick version. However, it caused problems on this build. I subsequently discovered that it won't start, and it also breaks the other two camera apps (LOS & Google). It worked fine on the previous build, and I'm wondering if it's because I didn't wipe.

So currently there is no way to use the tele camera with any apps? I can't change to the upper camera with gcam, nor with the builtin camera app, anxcamera isnt starting for me too.

 

[invisiblewave]

So currently there is no way to use the tele camera with any apps? I can't change to the upper camera with gcam, nor with the builtin camera app, anxcamera isnt starting for me too.

The tele camera? Mine switches between narrow and wide in the LOS app with the picture size setting. I haven't tried again now I've updated to Magisk 20.1, I don't know whether it's a Magisk or a rom problem.

 

[JohnZachgr]

Hi I'm trying to download the rom but I get en error from Mega that the file is corrupt. Could you please provide to me a valid link of RR rom? I'd really appreciated it.

 

[carlinleos]

Hi, I am not able to try this ROM my phone is always in bootlop, does anyone have solution for that?

 

[drumcodex]

Which gaaps to flash?? Flashing arm64 nano Keeps erroring saying wrong arch.. Flashing arm works but no Setup when rom boots first time. Help

 

[Der Held]

When will this ROM get updated again?

Hi,

since the last update was on September 28th I wonder, when this ROM will be updated again?

Are there any infos yet?