[ROM] A11 ArrowOS [Garden] 29-12-2021 UNOFFICIAL

Search This thread

yoshijulas

Member
Apr 17, 2019
37
10
Arrowlogo.png




I'm not responsible for damage made to your device



About:

ArrowOS
is an AOSP based project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day, aiming to deliver smooth performance with better battery life.



Made for Garden (Redmi 9A/Redmi 9/Redmi 9C)

Installation Guide:

  1. Flash MIUI Global 12.0.10 Via Fastboot (Or else, you are going to have issues with wifi)
  2. Install PBRP 3.1.0 Garden
  3. Boot into recovery (Power button + Vol up button until Redmi logo shows up)
  4. Wipe data
  5. Reboot recovery
  6. Flash ROM
  7. Flash GAPPS (Optional)
  8. Reboot to system
  9. Install Magisk (Optional)
  10. Done



Download: https://drive.google.com/file/d/16_wiTK5mwZpb6oRZg3iv3iV7LRP0cTXD/view?usp=sharing



Sources:
ROM:
https://github.com/ArrowOS/android_manifest
Device Tree: https://github.com/garden-dev/android_device_xiaomi_garden
Vendor: https://github.com/garden-dev/proprietary_vendor_xiaomi_garden
Kernel: Prebuilt on Device Tree
ROM SITE: https://arrowos.net/




PSA: You can search for more roms made for Garden on xda forums
 
  • Like
  • Love
Reactions: Inaxx and VD171

yoshijulas

Member
Apr 17, 2019
37
10
Can somebody please tell me which Gapps I have to use? Do I need ARM or ARM64 Gapps? I've tried it with OpenGapps and others without succes. Thanks
Arm Android 11

I use pico, but you can use what you like most

And i have used opengapps and works great, but there are others


ARM because the phone is 32 bits,

11/A11/R because this ROM its android 11

Pico because it only install the necesary to work, then you can download everything else on playstore
 
  • Like
Reactions: RaidBuII

RaidBuII

Member
Apr 25, 2020
9
0
Stuttgart
Redmi Note 10 Pro
Okay, Gapps are working now, but I had to reboot to recovery again before flashing them, otherwise it says I'm on SDK 29.

I also have issues with WiFi, althoug I used the URL you supplied. Scanning WiFi networks is working, but I can't connect to them.
 

RaidBuII

Member
Apr 25, 2020
9
0
Stuttgart
Redmi Note 10 Pro
you can see, but not connect to wifi?
Yes Sir, even if i finish the installation process over mobile data/mobile internet and than try to connectto my WiFi, it doesn't work. There only stands "saved" under my network, but not "connected". Tried it a few times, to be shure I entered the right password, but didn't work.
Same issue when I use OrangeFox Recovery with the same Miui Build, before flashing ArrowOS.
 

ademeridien12

New member
Jan 27, 2022
1
0
wifi is working fine, but I found gps issue. the dot become grey after first time I open maps and cannot follow my actual location.
 

domluoi5

Member
Jan 3, 2022
18
2
Now,My Phone is MIUI Global 12.0.17 and can't downgrade to MIUI Global 12.0.10. Should i install this rom?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Arrowlogo.png




    I'm not responsible for damage made to your device



    About:

    ArrowOS
    is an AOSP based project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day, aiming to deliver smooth performance with better battery life.



    Made for Garden (Redmi 9A/Redmi 9/Redmi 9C)

    Installation Guide:

    1. Flash MIUI Global 12.0.10 Via Fastboot (Or else, you are going to have issues with wifi)
    2. Install PBRP 3.1.0 Garden
    3. Boot into recovery (Power button + Vol up button until Redmi logo shows up)
    4. Wipe data
    5. Reboot recovery
    6. Flash ROM
    7. Flash GAPPS (Optional)
    8. Reboot to system
    9. Install Magisk (Optional)
    10. Done



    Download: https://drive.google.com/file/d/16_wiTK5mwZpb6oRZg3iv3iV7LRP0cTXD/view?usp=sharing



    Sources:
    ROM:
    https://github.com/ArrowOS/android_manifest
    Device Tree: https://github.com/garden-dev/android_device_xiaomi_garden
    Vendor: https://github.com/garden-dev/proprietary_vendor_xiaomi_garden
    Kernel: Prebuilt on Device Tree
    ROM SITE: https://arrowos.net/




    PSA: You can search for more roms made for Garden on xda forums
    1
    Can somebody please tell me which Gapps I have to use? Do I need ARM or ARM64 Gapps? I've tried it with OpenGapps and others without succes. Thanks
    Arm Android 11

    I use pico, but you can use what you like most

    And i have used opengapps and works great, but there are others


    ARM because the phone is 32 bits,

    11/A11/R because this ROM its android 11

    Pico because it only install the necesary to work, then you can download everything else on playstore
    1
    Wifi doesn't work. I used it as a base 12.0.10.0.
    just flash ur stock rom boot image in boot.img then reboot system ur wifi will be working 100%
    1
    How did you manage to install OrangeFox and ArrowOS
    mmm... I didnt do anything special really, I just followed Orange fox install instructions (I did have a slight issue with it but it was at the end of the instalation).

    with the phone unbricked and on MIUI 12.5.4.0

    first thing I did was to unlock bootloader, since it was locked again, I used the latest miunlock tool and I dint even need to wait

    Checked I have a A-only device with "adb shell getprop ro.boot.slot_suffix" like it tells you on [OFRP Install guide] (this is done in system), nothing showed up, so my device is A-only

    Downloaded [SDK platform-tools] and extracted it on "C:/adb/platform-tools"

    Restarted my phone into fastboot (power + vol dwn)

    Installed phone drivers using this video [ADB <Waiting for device> error]

    Downloaded this [Orange Fox Recovery .zip]

    Extracted the Recovery.img on the zip to "C:/adb/platform-tools"


    On windows oppened a CMD and went to "C:/adb/platform-tools" in CMD

    ran this command "fastboot flash recovery recovery.img"

    went into Orange fox recovery by using power+vol up

    The phone got bootloped, but weirdly enough only when trying to go into recovery, it was able to go to system just fine, so I looked it up and go to this thread [Recovery stuck on splash logo]. this will delete all your personall data, but it will allow you to go into custom recovery, you go into it, check it all works out good, and flash the .zip of oragne fox ( the one that you got the recovery.img [Orange Fox Recovery .zip])

    there you have orange fox custom recovery, at this point to be fully honest I dont remember if I even tried to go into system again, everytime I did before I flashed the .zip It created user data wich was ncrypted and made me use the fix once again, so I just flashed the ArrowOS .zip from the Orange fox custom recovery and it worked great, as I said, a lot better than expected.