[ROM][A11][H870|H870DS|H872|US997] LineageOS 18.1 for LG G6 with microG support [UNOFFICIAL]

Search This thread

spinx77

New member
Apr 5, 2021
1
0
Hello, thank you very much for this ROM. It's really nice that you support this device. Yesterday I installed the rom as described (over stock Nougat which was previously flashed with LGUP) and everything works great.

Is it safe to install Magisk when the ROM was already used for a while? Can I flash with Skyhawk recovery?
 
Last edited:

bernardobas

Senior Member
  • Jan 1, 2016
    729
    1,090
    Buenos Aires
    Hello,

    I just installed the lastest rom on my LG G6 H870 and everything seems to be ok. It's just when I want to install magisk from recovery, it says it cannot mount /vendor partition. Any idea where this can come from ?

    - Make sure you are running the recovery stated in the OP
    - Use the ZIP from the TG group and flash it through recovery
     

    bernardobas

    Senior Member
  • Jan 1, 2016
    729
    1,090
    Buenos Aires
    Hello, thank you very much for this ROM. It's really nice that you support this device. Yesterday I installed the rom as described (over stock Nougat which was previously flashed with LGUP) and everything works great.

    Is it safe to install Magisk when the ROM was already used for a while? Can I flash with Skyhawk recovery?

    If you flashed the rom on top of Nougat you'll need to update your bootloader or some things will not work (such as fingerprint reader).

    It is safe to flash Magisk at any moment. I recommend using the ZIP posted in the G6 Telegram group.

    More info about both things in the first post of this thread.
     
    • Like
    Reactions: spinx77

    pococos

    Member
    Jul 31, 2019
    14
    13
    Glad that new camera blobs fixed your app issue.

    Just clean flashed my second G6 and I can confirm IG reels are working fine.

    Clean flashing is also recommended to get the best possible battery life. Takes a couple of days to reach the best performance tho.
    I will proceed to a clean flash and avoid Nikk Gapp and replace them by Roar Gapps :)
    Thanks for the advice.

    Regarding battery life, I guess that my LG G6 won't have a great one again due to it's wear, years of charging my phone every night ^^"
     
    • Like
    Reactions: bernardobas

    bernardobas

    Senior Member
  • Jan 1, 2016
    729
    1,090
    Buenos Aires
    New LineageOS 18.1 (A11) build available for H870 - H870DS - H872 - US997

    Build date
    08/04/2021

    Lineage changes
    · April security patch

    Device changes
    · Increased mic input level for regular phone calls
    · ZRAM enabled
    · Various camera optimizations

    >> Builds for all LG G6 variants <<

    For those already running Lineage 18.1 with Roar Gapps who prefer dirty flashing: first wipe dalvik, system, cache and then flash ROM, Gapps & Trash Remover (optional), Roar Gapps, Magisk (optional). Additional links are listed in the first post of this thread.
     

    bebr

    Member
    Feb 19, 2008
    18
    2
    ...

    Oreo or Pie bootloader required
    Bootloaders for all LG G6 variants

    Android 11 recovery required
    Other older recoveries may not be fully compatible with Android 11
    SkyHawk Recovery Project

    Instructions
    - Clean flash is mandatory
    - Backup everything
    - Update your recovery (otherwise flashing Android 11 based roms will fail). It's a flasheable ZIP, no need to unzip
    - Update your bootloader (fingerprint reader doesn't work with old bootloaders)
    - Download the latest build and Roar Gapps (Mini Me package is highly recommended)
    - Reboot to recovery
    - Wipe system, data, cache, dalvik
    - Flash the latest build and Roar Gapps (Mini Me highly recommended)
    - Magisk (optional)
    - Reboot and enjoy
    Is it just me who has experience with a handful of cyanogen mod and lineage-OS installs and still has to spend hours every time again to get a new phone running?
    In other words, the Android modding community is still a fascinating sociologic phenomenon.

    This time it was a LG G6, with stock Android 10 installed.
    LG forces you to accept multiple regulations that "statistic" data is send to them - more than the one that Google asks. This is e-v-i-l so you want a new OS without LG bloatware.
    The lineage OS wiki says there is no official port - so I was happy to find this thread.

    >> What does our master mean with "Clean flash is mandatory"? <<

    Finally I succeeded with these steps:
    1- adb / fastboot as well as LG drivers were installed on the Windows 10 Laptop
    2- Stock LG Bootloader prevents flashing new ROMs and has to be unlocked:
    >> https://developer.lge.com/resource/mobile/RetrieveBootloader.dev
    >> Setup an account at LG as developer, send IMEI and Device-ID, get Email
    >> fastboot flash unlock unlock.bin > success
    - "Update your bootloader" was not neccessary (because G6 was already running And.11)
    3- A TWRP recovery image has to be installed (stock G6 recovery does not suffice)
    Lesson learned: SkyHawk Recovery Project is just a UI on top of TWRP !
    BUT: "It's a flasheable ZIP, no need to unzip" is wrong > error "image is not a boot image"
    > The recovery.img file has to be extracted manually out of SHRP_v2.3.2_h870-233920072020.zip
    Then:
    fastboot flash recovery recovery.img
    fastboot erase cache .. reboot

    4- Boot into Sky Hawk TWRP:
    vol-down + Power buttons, Logo appears > Power button relased for 1 sec
    5- Sky Hawk > Wipe data, cache, davlik > Ok
    Advanced > sideload
    6- On the PC connected via USB:
    adb sideload lineage-18.1-20210408-UNOFFICIAL-h870.zip
    after success: advanced > sideload again:
    adb sideload RoarTheGapps_MINI-ME_20210407.zip
    7- reboot > Lineage OS Logo appears - puhh

    Took me the half day and I missed the MotoGP race .. f**k !
     
    Last edited:

    placidns11

    Member
    Jun 7, 2018
    18
    8
    First of all thanks to dev for updates. I've using the rom for a month or more now. Most functions work just great for me. Here are some things I've noticed that affect my daily use the most.
    The Bluetooth on my car lincoln mkz 2017 has never had any problems in the past connecting when I turn on the car. With Android 11 it will not auto connect unless I wake up my phone screen. Not sure if is it an Android 11 feature change or if the rom is making this happen. The other thing that goes along with that is the Ford/lincoln Alexa app for android. It always was able to use the app once the Bluetooth is connected. Now I have to manually open the app on the phone before the car can detect that it's available. Anyone else see any thing like this on their end with bluetooth.??
    The last thing that happens commonly is when I unlock my phone the screen will freeze up for about 5 to up to 10 seconds, before it allows me to move or do anything. Many times after this happens I'll get a system UI has stopped responding error. The phone works fine after the time passes in the error is cleared
     

    bernardobas

    Senior Member
  • Jan 1, 2016
    729
    1,090
    Buenos Aires
    Is it just me who has experience with a handful of cyanogen mod and lineage-OS installs and still has to spend hours every time again to get a new phone running?
    In other words, the Android modding community is still a fascinating sociologic phenomenon.

    This time it was a LG G6, with stock Android 10 installed.
    LG forces you to accept multiple regulations that "statistic" data is send to them - more than the one that Google asks. This is e-v-i-l so you want a new OS without LG bloatware.
    The lineage OS wiki says there is no official port - so I was happy to find this thread.

    >> What does our master mean with "Clean flash is mandatory"? <<

    Finally I succeeded with these steps:
    1- adb / fastboot as well as LG drivers were installed on the Windows 10 Laptop
    2- Stock LG Bootloader prevents flashing new ROMs and has to be unlocked:
    >> https://developer.lge.com/resource/mobile/RetrieveBootloader.dev
    >> Setup an account at LG as developer, send IMEI and Device-ID, get Email
    >> fastboot flash unlock unlock.bin > success
    - "Update your bootloader" was not neccessary (because G6 was already running And.11)
    3- A TWRP recovery image has to be installed (stock G6 recovery does not suffice)
    Lesson learned: SkyHawk Recovery Project is just a UI on top of TWRP !
    BUT: "It's a flasheable ZIP, no need to unzip" is wrong > error "image is not a boot image"
    > The recovery.img file has to be extracted manually out of SHRP_v2.3.2_h870-233920072020.zip
    Then:
    fastboot flash recovery recovery.img
    fastboot erase cache .. reboot

    4- Boot into Sky Hawk TWRP:
    vol-down + Power buttons, Logo appears > Power button relased for 1 sec
    5- Sky Hawk > Wipe data, cache, davlik > Ok
    Advanced > sideload
    6- On the PC connected via USB:
    adb sideload lineage-18.1-20210408-UNOFFICIAL-h870.zip
    after success: advanced > sideload again:
    adb sideload RoarTheGapps_MINI-ME_20210407.zip
    7- reboot > Lineage OS Logo appears - puhh

    Took me the half day and I missed the MotoGP race .. f**k !
    Well, you made things in the most twisted way. So when you asume some op step is wrrong, it's because of that.

    There is a lot of info about how to unlock and flash a new recovery (xda, Telegram). Next time take the time to Google a bit and it will take you about an hour like any other human being. And you won't miss your race or whatever.

    Good luck
     

    bernardobas

    Senior Member
  • Jan 1, 2016
    729
    1,090
    Buenos Aires
    First of all thanks to dev for updates. I've using the rom for a month or more now. Most functions work just great for me. Here are some things I've noticed that affect my daily use the most.
    The Bluetooth on my car lincoln mkz 2017 has never had any problems in the past connecting when I turn on the car. With Android 11 it will not auto connect unless I wake up my phone screen. Not sure if is it an Android 11 feature change or if the rom is making this happen. The other thing that goes along with that is the Ford/lincoln Alexa app for android. It always was able to use the app once the Bluetooth is connected. Now I have to manually open the app on the phone before the car can detect that it's available. Anyone else see any thing like this on their end with bluetooth.??
    The last thing that happens commonly is when I unlock my phone the screen will freeze up for about 5 to up to 10 seconds, before it allows me to move or do anything. Many times after this happens I'll get a system UI has stopped responding error. The phone works fine after the time passes in the error is cleared

    BT usually tries to reconnect to the last connected device, but yeah it has to be improved.

    For the frozen screen issue, I recommend doing a clean flash and using the gapps stated on the first post of this thread. I have zero lag with that.
     

    bebr

    Member
    Feb 19, 2008
    18
    2
    Well, you made things in the most twisted way.
    Oha, so what could one just leave out?
    There is a lot of info about how to unlock and flash a new recovery (xda, Telegram). Next time take the time to Google a bit and it will take you about an hour like any other human being. And you won't miss your race or whatever.
    Why not write precisely the neccessary steps in one post, or wiki page?
    Unlocking worked fine, as I did this before for a G5.
    What took my time was sorting out the relation between "Recovery" (not the OS-image, the application), TWRP and Sky Hawk; plus the bootloader question.
    Clearer wording would help - for people who do not happen to practice Android-modding as their main hobby.
     

    bernardobas

    Senior Member
  • Jan 1, 2016
    729
    1,090
    Buenos Aires
    Why not write precisely the neccessary steps in one post, or wiki page?
    Because there are specific threads for each variant such as this for H872 which is my device (and I can test / write about): https://forum.xda-developers.com/t/...for-lg-g6-h872-20g-original-firmware.4201125/

    Lineage wiki is for officially supported devices and is edited by Lineage team members.

    Clearer wording is indeed present on those other places you should seek before starting with the process. That will save you time and avoid the risk of bricking your phone.

    Edit: fyi this is the thread you should have read for unlocking and installing a custom recovery your variant: https://forum.xda-developers.com/t/...urrently-supported-eu-h870-usa-us997.3614719/
     
    Last edited:

    samlibardi

    New member
    Mar 26, 2021
    2
    3
    Is it just me who has experience with a handful of cyanogen mod and lineage-OS installs and still has to spend hours every time again to get a new phone running?
    In other words, the Android modding community is still a fascinating sociologic phenomenon.

    This time it was a LG G6, with stock Android 10 installed.
    LG forces you to accept multiple regulations that "statistic" data is send to them - more than the one that Google asks. This is e-v-i-l so you want a new OS without LG bloatware.
    The lineage OS wiki says there is no official port - so I was happy to find this thread.

    >> What does our master mean with "Clean flash is mandatory"? <<

    Finally I succeeded with these steps:
    1- adb / fastboot as well as LG drivers were installed on the Windows 10 Laptop
    2- Stock LG Bootloader prevents flashing new ROMs and has to be unlocked:
    >> https://developer.lge.com/resource/mobile/RetrieveBootloader.dev
    >> Setup an account at LG as developer, send IMEI and Device-ID, get Email
    >> fastboot flash unlock unlock.bin > success
    - "Update your bootloader" was not neccessary (because G6 was already running And.11)
    3- A TWRP recovery image has to be installed (stock G6 recovery does not suffice)
    Lesson learned: SkyHawk Recovery Project is just a UI on top of TWRP !
    BUT: "It's a flasheable ZIP, no need to unzip" is wrong > error "image is not a boot image"
    > The recovery.img file has to be extracted manually out of SHRP_v2.3.2_h870-233920072020.zip
    Then:
    fastboot flash recovery recovery.img
    fastboot erase cache .. reboot

    4- Boot into Sky Hawk TWRP:
    vol-down + Power buttons, Logo appears > Power button relased for 1 sec
    5- Sky Hawk > Wipe data, cache, davlik > Ok
    Advanced > sideload
    6- On the PC connected via USB:
    adb sideload lineage-18.1-20210408-UNOFFICIAL-h870.zip
    after success: advanced > sideload again:
    adb sideload RoarTheGapps_MINI-ME_20210407.zip
    7- reboot > Lineage OS Logo appears - puhh

    Took me the half day and I missed the MotoGP race .. f**k !
    To be honest I have little experience on messing with custom ROMs, this being the second time I ever flashed a custom ROM, the other being some Samsung tablet a few years ago. I didn't find this too hard, and about 80% of the wasted time was caused by dumb LG shenanigans like the locked bootloader and their USB driver refusing to detect my phone while in fastboot. As soon as I got to boot into TWRP, everything else was a breeze when I followed the instructions strictly.
     
    • Like
    Reactions: bernardobas

    placidns11

    Member
    Jun 7, 2018
    18
    8
    One other thing about the Rom and android 11 I have been trying to figure out myself but having no luck. When I am using LTE and moving about my city it seems the text/calling portion has issues. The phone shows LTE signal being full but I lose the ability to make calls and get texts. It seems to be a signal issue with LTE and voice portion. At my own house it almost never allows me to get calls/texts, yet the data works perfectly fine(wifi is off). The solution I have been using is to go into settings-network and internet-mobile network-preferred network type.. Then I choose any settings there that Dont have LTE. Within seconds the LTE changes to 3g/UMTS/EDGE or HSPA+ and I can get calls and texts right away, but slow data of course. I have been trying to use programs like "Network Cell Info lite" and "LTE discovery" to see what service is being used but I dont really understand what to look for as far as LTE data vs LTE voice(?) and what the connections are.
    When I have LTE enabled, using the program i see LTE and GSM graphs but GSM says N/A. When LTE is off, the GSM graph portion now shows HSPA+ and has signal(dBm), and my texts and calls start working again....
    Maybe I need a way to force LTE and HSPA at the same time? is this possible, or does that not make any sense??
    Any help or thoughts would be great!! I also see things is those programs that say (Voice is LTE) but doesnt this ROM have volte disabled, is that the same??
    I have Mint Mobile as my provider( this all worked just fine with stock rom 21E) a few months ago)
     
    Last edited:

    placidns11

    Member
    Jun 7, 2018
    18
    8
    BT usually tries to reconnect to the last connected device, but yeah it has to be improved.

    For the frozen screen issue, I recommend doing a clean flash and using the gapps stated on the first post of this thread. I have zero lag with that.
    I will give that a clean install again some point, I dirty flashed the latest update a week ago, issue was happening prior to that! But I have using roarthegapps and Magisk v22. Thanks again for the work
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 5
      New LineageOS 18.1 (A11) build available for H870 - H870DS - H872 - US997

      Build date
      14/06/2021

      Lineage changes
      · June security patch
      · More fixes and optimizations

      >> Builds for all LG G6 variants <<

      For those already running Lineage 18.1 with Roar Gapps who prefer dirty flashing: first wipe dalvik, system, cache and then flash ROM, Gapps & Trash Remover (optional), Roar Gapps, Magisk (optional). Additional links are listed in the first post of this thread.
      4
      New LineageOS 18.1 (A11) build available for H870 - H870DS - H872 - US997

      Build date
      26/05/2021

      Lineage changes
      · PowerMenuActions: Add emergency option
      · Power menu actions settings are back
      · Power menu customizations for R
      · Dialer: use black/white navigation colors
      · Bluetooth: follow system theme in dialogs
      · Fix multi-user awareness
      · Apns: Add AT&T 310-280 ids
      · Remove Bluetooth related text from DNS-dialog
      · Trebuchet: Set 5x6 grid to 5 hotseat icons
      · Fix voicemail for Bouygues Telecom France
      · Add strings for "Disabled" + wake on pick-up
      · Snap: reduce unneeded animations
      · Snap: add QR scanner mode
      · Snap: update promode icons
      · Snap: use nicer icons in settings
      · Apns: Enable IPV6 for China Telecom
      · Apns: Enable IPV6 for China Unicom
      · Apns: Enable IPV6 for China Mobile
      · Settings: Make setup wizard go through ChooseLockPatternSize if needed
      · Settings: Make FRP go through ChooseLockPatternSize if needed
      · Settings: Remove hardcoded extras from ChooseLockPatternSize
      · Snap: use translucent control background on 16:9
      · Apns: Add Kena Mobile entries
      · Apns: Update PosteMobile entries
      · Apns: Add ho.mobile configs
      · Apns: Update CoopVoce entries
      · More fixes and optimizations

      Device changes
      Due to own hardware issues I cannot use or event test V30 camera and sensor blobs. All future builds will include V20J blobs.
      · Camera and sensors blobs back to V20J
      · Optimize mic input level during regular phone calls using loudspeaker

      >> Builds for all LG G6 variants <<

      For those already running Lineage 18.1 with Roar Gapps who prefer dirty flashing: first wipe dalvik, system, cache and then flash ROM, Gapps & Trash Remover (optional), Roar Gapps, Magisk (optional). Additional links are listed in the first post of this thread.
      2
      New LineageOS 18.1 (A11) build available for H870 - H870DS - H872 - US997

      Build date
      28/05/2021

      Device changes
      **Device changes**
      · Camera and sensors blobs back to V30x to fix focus

      >> Builds for all LG G6 variants <<

      For those already running Lineage 18.1 with Roar Gapps who prefer dirty flashing: first wipe dalvik, system, cache and then flash ROM, Gapps & Trash Remover (optional), Roar Gapps, Magisk (optional). Additional links are listed in the first post of this thread.
      1
      Is it normal that my device appears as not rooted for apps after flashing this rom? I have to install magisk and only then apps like Smartpack Kernel Manager works well.

      Yes, it's normal. The rom is not pre rooted.
      1
      Thanks for your continuous work on G6 ROMs !
      Just to share my experiences with other noobs, who flash their phones only every month or so and not every day:
      - Unlocking, Bootloader and recovery (Skyhawk) was still valid from a previous lineage install
      - Boot in Skyhawk TWRP works fine > Wipe System, Cache, Davlik
      - Skyhawk: Advanced > Sideload
      - PC: adb sideload lineage-18.1-20210528-UNOFFICIAL-h870.zip
      > succeeded
      - adb sideload Roar_gapps.. > produces an Error:
      '... connection failed'
      # Tried various steps, what worked in the end:
      - Boot into new Lineage (without Gapps), activate developer settings > USB-Debug
      - Reboot into recovery > Skyhawk is gone, instead a 18.1 recovery, which has other menus, after some trial & error I found:
      - Apply update > from ADB > sideload
      - PC: adb sideload Roar_gapps...zip
      So now I could start Google Play store, install my Backup software of choice (Myphoneexplorer) and get back (important parts of) my phone.
    • 11
      BSG GCam 8.1 (best camera choice)

      Our BSG friends are doing an amazing job releasing new versions almost every week.

      The below recommended version has been tested and works fine but feel free to download any other.

      >> Download recommended MGC_8.1.101_A9_PVs_libs_Eng <<
      · Includes XML config and 3rd party gallery support (among other new features).
      · 1/8 slow motion doesn't work but 1/4 works fine.
      · Logging disabled
      · Runs smoother than other builds


      BSG Telegram Channel
      10
      attachment.php


      LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.

      Code:
      #include <std_disclaimer.h>
      /*
      * Your warranty is now void.
      *
      * We are not responsible for bricked devices, dead SD cards,
      * thermonuclear war, or you getting fired because the alarm app failed. Please
      * do some research if you have any concerns about features included in this ROM
      * before flashing it! YOU are choosing to make these modifications, and if
      * you point the finger at us for messing up your device, we will laugh at you.
      *
      */

      What's working?
      WiFi
      RIL
      Mobile data
      GPS
      Camera
      Flashlight
      Camcorder
      Bluetooth
      Fingerprint reader
      NFC
      Flashlight
      Sound
      Vibration
      microG support

      Known issues
      - VoLTE doesn't work. LG uses a proprietary implementation of VoLTE that is not compliant with AOSP. Fixable? Probably not.
      - Encryption doesn't work

      Bug reporting
      If you want to report bugs, please always indicate device variant, Gapps package, Magisk version and Magisk modules installed.

      Prerequisites
      Your device must be unlocked and running a custom recovery. Click here if your variant is H870 or US997 and here for H872.

      Oreo or Pie bootloader required
      H870: if you are running the latest Stock Pie, there's no need to update your bootloader.
      US997 and H872: if you are running the latest Stock Oreo, there's no need to update your bootloader.
      In case you aren't running those stock versions, you'll need to update your bootloader by flashing the right one for your variant.
      Bootloaders for all LG G6 variants

      Android 11 recovery required
      After you unlocked your bootloader and flashed the suggested TWRP version, you'll need to upgrade your recovery to have A11 support. Old recoveries will not work with Android 11. OrangeFox and SkyHawk are both TWRP based and are fully compatible with this rom. You can flash them like any other ZIP (no need to unzip). Once flashed, you can use the "reboot to recovery" option to start flashing the rest of the packages.
      OrangeFox Recovery
      SkyHawk Recovery

      Instructions
      - Clean flash is mandatory
      - Backup everything
      - Unlock your device and install TWRP following the prerequisites guides above
      - Update your recovery to the latest OrangeFox or SkyHawk (otherwise flashing Android 11 based roms will fail). They are flasheable ZIPs, no need to unzip
      - Update your bootloader if needed (fingerprint reader doesn't work with old bootloaders)
      - Download the latest build and Roar Gapps (Mini Me package is mandatory, other packages will cause issues)
      - Reboot to recovery
      - Wipe system, data, cache, dalvik
      - Flash the latest build and Roar Gapps Mini Me
      - Magisk (optional)
      - Reboot and enjoy

      Downloads
      LineageOS for all LG G6 variants

      Debloated builds
      You can flash Gapps & Trash Remover by Cheewaca. All these apps will be removed: AudioFX, Camera2, Contacts, DeskClock, Dialer, Eleven, Email, Etar, ExactCalculator, Exchange, Gallery2, Jelly, Messaging, Recorder, Snap, Updater.

      The order for flashing is: ROM + Gapps & Trash Remover + Gapps + Magisk.

      You can get the remover here: https://t.me/Gapps_Trash_Remover

      Stay up to date
      LG G6 ThinQ Community
      LG G6 ThinQ Releases
      The real devs are there!!!

      Sources
      LineageOS
      Devices tree and kernel

      Thanks
      Thanks to @-Androider- for sharing his work as the previous maintainer. And special thanks to @TheWolfSVK, @dom133 and Cheewaca who are the real brains behind this (sorry if I forgot about someone).

      -
      5
      New LineageOS 18.1 (A11) build available for H870 - H870DS - H872 - US997

      Build date
      14/06/2021

      Lineage changes
      · June security patch
      · More fixes and optimizations

      >> Builds for all LG G6 variants <<

      For those already running Lineage 18.1 with Roar Gapps who prefer dirty flashing: first wipe dalvik, system, cache and then flash ROM, Gapps & Trash Remover (optional), Roar Gapps, Magisk (optional). Additional links are listed in the first post of this thread.
      5
      New LineageOS 17.1 builds available for H870 - H870DS - H872 - US997

      Build date: 10/08/2020

      Changelog:

      LineageOS Changes:
      - Android 10.0.0 Release 41
      - New security patch level: 05.08.2020
      - VolumeDialog: Redo expanded volume panel
      - Add APN for Telefonica
      - Calendar: Make use of system theme setting on android 10 (#715)
      - DeskClock: Fix alarm clock screen show black when screen locked
      - Messaging: fix launch screen status bar color
      - Dialer: Fix launch screen status bar color
      - Upstream updates, enhancements and fixes

      Device Changes:
      · Removed AudioFX to avoid random reboots while playing video

      Kernel Changes:
      · Update WireGuard to version 1.0.20200729

      Random reboots while playing video are fixed.

      >> Downloads for all LG G6 variants <<
      5
      does H870DS unlock bootloader available?

      How is It possible to install this ROM on H870DS? Is It possible to unlock its bootloader now?

      Some users got the bin file for unlocking directly from LG. You should join this TG group to get the exact procedure: https://t.me/LGG6BootloaderExploit