full wipe - format data.
yo bro to flash the rom you have to flash the kernel, vendor, system after flashing the magisk (not mandatory) and normally it should work.
Yo bro to start you have to install twrp 3.6.1 that Yillié then created flash. Turn on your phone in recovery mode then unpack the rom file, flash the kernel, the vendor, the system. then only if you want to flash masgisk canary that you will find by searching on the internet then restart your phone and normally you should have the rom with magisk canary.
Hello bro here is the link for magisk canary: https://www.xda-developers.com/magisk-canary-release-android-12-support/
Bro i flashed same like this (flashed kernel to the boot option. Then vendor to super and then system img file to the super option) but twrp and orange fox recovery both show warning of no OS installed and device get bricked ... Helped needed
Yo join the discord server that I put we talk about it and imun users installed it his nickname is TomFang he can help you.Bro j'ai flashé la même chose comme ça (noyau flashé vers l'option de démarrage. Ensuite, le fournisseur vers super puis le fichier système img vers la super option) mais twrp et orange fox recovery affichent tous deux un avertissement indiquant qu'aucun système d'exploitation n'est installé et que le périphérique est bloqué ... Aide nécessaire
actually the process would very simple. you just need flash system to system and vendor to vendor and then flash magisk and dm-verity.
Great work there writing those steps!*This procedure will wipe your /data partition, so make a backup of all your important files to an SD Card or PC
*If anyone sees a mistake in any of these steps, please correct me
Step 1: You must be on Binary 5 (stock OneUI 4.1/Android 12) to prevent any issues. If you are not, download the corresponding firmware using Frija or samfw
Step 2: Download Odin3 in your pc and open it
Step 3: Unlock your phone's bootloader if locked
Step 4: Turn off your phone and while you keep pressed Vol. Down and Vol. Up, connect it via USB to the pc
Step 5: Wait for the warning message and press Vol. Up to continue (as shown here)
Step 6: When this screen appears, you can start using Odin3.
Step 7: Download the TWRP-11-3.6.1-a51-20220321-1406-hotfix.tar from Yillie's GitHub
Step 8: Uncheck Auto-Reboot, click the AP button and select the .tar downloaded (as shown here)
Step 9: Click on Start and wait till it says PASS in the upper left corner
Step 10: Once it finished, without disconnecting the USB, keep pressed Vol. Down + Power and immediately after the phone turns off, keep pressed the Vol. Up key till it shows the TWRP logo.
Step 11: Press Install and flash the Multidisabler.zip attached (this will remove the FBE or File-Based encryption so you can use the internal storage in TWRP)
Step 12: Go back to home screen, press Wipe, then Format data, type yes
Step 13: Go back and then press Reboot -> Recovery
Step 14: Backup your IMEI (Home > Backup > EFS)
Step 14: Press Install and flash the DynaPatch to be able to use Chondoe Flasher later
Step 15: Reboot to Recovery again
Step 16: Move the Chondoe Flasher.zip attached to your Internal Storage
Step 17: Extract ICBM rom, rename ICBM-A51-A12-v1(sys).img to system.img and ICBM-A51-A12-v1(vendor).img to vendor.img and move it to your phone's Internal Storage (must be in the same place)
Step 18: Home > Wipe > Dalvik / ART Cache + Cache > Swipe to wipe
Step 19: Flash the kernel (Thermobaric-V1-A12-52122.img) as boot using the TWRP interface (Install > Install Image > Select file > Boot > Swipe to flash)
Step 20: Flash Chondoe Flasher.zip and wait till it flashes the ROM
Step 21 (Optional): Flash Magisk if you want (attached it too)
Step 22: Reboot to System and it should be working
*This procedure will wipe your /data partition, so make a backup of all your important files to an SD Card or PC
I too bootloop and preffered STOCK ROM a12