[ROM] [AICP] [9.0] LENOVO K6 POWER [UNOFFICIAL]

Search This thread

siva1234

Senior Member
Oct 4, 2016
75
401
29
Salem
https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Flogo_black.png

AICP​
Android Ice Cold Project​

AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.

If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!

HTML:
/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
 *
 */

https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Ffeatures.png
Features List



https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fcredits.png
In the beginning we would like to thank:

LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
TEAM HYPER
Community
...​

https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fdonations.png

Paypal


https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fdownloads.png
Latest stable release version 14.0​
AICP-ROM

GApps


https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fissues.png
You tell :v​


FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.

Q. Does this ROM support custom kernels?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm/whatever for SDK 27.​

Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...

Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.

Q. How do I dirty flash builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.​

https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Finstructions.png
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:
(Again: Don't do it if you don't know it!)

1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Reboot recovery
6. Flash GApps (optional, needed for e.g. Google Playstore to work).
7. reboot/ profit
8. Flash the root solution of your choice after first boot (optional).​

Currently Supported Root Solutions:​
Magisk Stable


Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine​

KERNEL
The kernel in this ROM uses @karthickmostwanted kernel source. So Thank You to karthick and team hyper!You are greatly appreciated kind sir! I have linked kernel source farther down in the OP.​

PREREQUISITE FOR OTA
:
To be able to flash using the built-in OTA app, TWRP recovery is needed.
You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!​

If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)

https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fsources.png
AICP GERRIT Code review

AICP Github



XDA:DevDB Information
[ROM] [AICP] [9.0] LENOVO K6 POWER [UNOFFICIAL], ROM for the Lenovo K6 / K6 Power / K6 Note

Contributors
siva1234, karthick mostwanted
Source Code: https://github.com/karthick111/android_kernel_lenovo_msm8937

ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: Los

Version Information
Status: Stable
Current Stable Version: 14.0
Stable Release Date: 2019-11-29

Created 2019-11-29
Last Updated 2019-11-29
 

zeta041

Member
Jan 4, 2018
8
1
I clean-flashed. However, bootup takes very long (not just the first boot, every single time). On startup, the bootanimation stops suddenly and then a blank screen follows. The bootanimation starts again after a minute and then it takes about 3 more minutes from there to the lockscreen. Anyone else seeing this?

Other than this, the ROM works fine.
 
Last edited:

nikagg70

Member
Dec 8, 2018
12
3
I clean-flashed. However, bootup takes very long (not just the first boot, every single time). On startup, the bootanimation stops suddenly and then a blank screen follows. The bootanimation starts again after a minute and then it takes about 3 more minutes from there to the lockscreen. Anyone else seeing this?

Other than this, the ROM works fine.


Facing Same issue
 

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Flogo_black.png

    AICP​
    Android Ice Cold Project​

    AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

    Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
    With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.

    If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!

    HTML:
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
     *
     */

    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Ffeatures.png
    Features List



    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fcredits.png
    In the beginning we would like to thank:

    LineageOS & CM (R.I.P.) team
    @Maxwen and the rest of the OmniRom team
    DU team
    SlimRoms team
    Resurrection Remix team
    TEAM HYPER
    Community
    ...​

    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fdonations.png

    Paypal


    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fdownloads.png
    Latest stable release version 14.0​
    AICP-ROM

    GApps


    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fissues.png
    You tell :v​


    FAQ:
    Before using the ROM:
    Q. Can I have an ETA for the next build?
    A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.

    Q. Does this ROM support custom kernels?
    A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

    Q. Why doesn't this ROM support Xposed?
    A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

    Q. Alright, but I still want to flash Xposed, so which version do I need to install?
    A. You will need to use the version arm64/arm/whatever for SDK 27.​

    Flashing the ROM:
    Q. What do I need to know before flashing?
    A. Check the install instructions in the first post...

    Q. Can the builds be dirty flashed over each other?
    A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.

    Q. How do I dirty flash builds?
    A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

    Q. How do I flash kernel builds?
    A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
    A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.​

    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Finstructions.png
    The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, GApps, flash it and go!
    If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

    It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
    If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
    How to flash:
    (Again: Don't do it if you don't know it!)

    1. Download the ROM and GApps and transfer them to your device.
    2. Boot to recovery (TWRP recommended).
    3. Wipe the System, Cache, Data and ART/Dalvik cache.
    4. Flash the ROM Zipfile.
    5. Reboot recovery
    6. Flash GApps (optional, needed for e.g. Google Playstore to work).
    7. reboot/ profit
    8. Flash the root solution of your choice after first boot (optional).​

    Currently Supported Root Solutions:​
    Magisk Stable


    Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine​

    KERNEL
    The kernel in this ROM uses @karthickmostwanted kernel source. So Thank You to karthick and team hyper!You are greatly appreciated kind sir! I have linked kernel source farther down in the OP.​

    PREREQUISITE FOR OTA
    :
    To be able to flash using the built-in OTA app, TWRP recovery is needed.
    You can still use the LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. The Zipfile gets saved in the "aicp_ota" folder on your internal storage.
    Please be sure that you are on the latest TWRP recovery. Keep in mind that this could also be an unofficial version!​

    If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)

    https%3A%2F%2Fraw.githubusercontent.com%2FAICP%2Fvendor_aicp%2Fo8.1%2Fxda_template%2Fsources.png
    AICP GERRIT Code review

    AICP Github



    XDA:DevDB Information
    [ROM] [AICP] [9.0] LENOVO K6 POWER [UNOFFICIAL], ROM for the Lenovo K6 / K6 Power / K6 Note

    Contributors
    siva1234, karthick mostwanted
    Source Code: https://github.com/karthick111/android_kernel_lenovo_msm8937

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    Based On: Los

    Version Information
    Status: Stable
    Current Stable Version: 14.0
    Stable Release Date: 2019-11-29

    Created 2019-11-29
    Last Updated 2019-11-29