• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Rom] AICP Q 15.0 [UNOFFICIAL] [12/07/2020] [ANDROID 10.0] [MIDO]

Search This thread

ashaykapadiya

Senior Member
Nov 25, 2016
104
85
Ahmedabad, Gujarat


logo_black.png


AICP
Android Ice Cold Project

AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.

If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!


Code:
#include <std_disclaimer.h>

/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications and if
 * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
 *
 */

features.png

Feature list (rough overview)


credits.png


In the beginning we would like to thank:

GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...

team.png


@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...

downloads.png


Latest Stable Release Version 15.0


issues.png


You tell... :p

FAQ:
Before using the ROM:

Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .

Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...

Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.

Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.

Using the ROM:

Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.

Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this

Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)

Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.


instructions.png


The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.

How to flash for the first time:
(Again: Don't do it if you don't know!)

1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!


The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.


Currently supported Root Solution:

Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.

sources.png


Source
Kernel source
Device tree source
Vendor source

Additional links:
My AICP Telegram Channel
My AICP Telegram Group for discussion and bug reports


Contributors:
@ashaykapadiya, @suyogg Helped a lot, @zeelog for device trees,kernel and vendor.

Thanks to doubleA, Cloudburner and other mido community devs for helping me build roms.


ROM OS Version: Android 10.0
Kernel: Linux 3.x

Version Information:
Status: Stable
ROM Firmware Required: Latest stable
Release Date: 07/03/2020
Latest Build Date: 12/07/2020

You want to see a "normal" night at the "DEV office", click here!!
 
Last edited:

ashaykapadiya

Senior Member
Nov 25, 2016
104
85
Ahmedabad, Gujarat
Latest Update - 12/07/2020

Changelog: 12/07/2020 Update

* July Security Patch Merged
* Moto Dolby Added
* Latest changes merge from Zeelog


Changelog: 11/06/2020 Update

* June Security Patch Merged
* Wifi Bonding for 2.4ghz
* Added Camera Libs from Hydrogen
* Updated wcnss_service
* Updated Carrierconfig Overlay from tissot
* Latest changes merge from zeelog
* Enabled GLONASS
* Added Google AR Support
* Fixed Dirac
* Added support for Vodafone VOLTE



Changelog: 23/05/2020 Update

* May Security Patch Merged
* Updated Dispaly Hals from LA.UM.8.6.r1-04400-89xx.0


Changelog: 13/04/2020 Update

* April Security Patch Merged
* Updated GPS/Media/Thermal/Sensors/Perf/Widevine Blobs From LA.UM.8.6.r1-04000-89xx.0
* All Latest Changes Merged From Zeelog Trees
* Fixed Dark Video Recording Issue
* Improved Network Strength
* Optimized Shutdown Speed
* Fixed Advance Control


Changelog: 12/03/2020 Update

* Selinux Enforcing
* Minor Fixes

Note : Advanced Cotrols will not work on Selinux Enforcing as of now and if you wanna use it then switch to permissive by going to System>Aicp Extras>System Behaviour>Toggle it to permissive and select restore on boot .


Changelog: 09/03/2020 Update

* Merged Proper Goodix Fix (Thanks to Zeelog)
* March Security Patch
* Added Advanced Control
* Added Dark Theme Based on Sunrise/Sunset
* Merged Device Tree Changes Zeelog
* Merged Kernel Updates From Zeelog
* Merged Vendor Updates From Zeelog
 
Last edited:

Sid130690

Senior Member
Nov 4, 2014
123
15
Mumbai
Can notification led colour be customised in this rom? Do they work? Asking since this feature ain't working in Pie based Roms.
 
kindly flash different kernel, i would suggest underground or ethereal kernel. new build with everything fixed will be up soon. Thanks:eek:

Hey, I've done what You suggested. We will see, how this will work. First good sign - after flashing with new kernel, I was able to push titanium backup and lucky patcher via properly connected adb (wasn't able to do so on stock kernel in aicp q15, not sure why), while I wasn't able to install it normally via system, despite having all safety ticks turned off.
 

ashaykapadiya

Senior Member
Nov 25, 2016
104
85
Ahmedabad, Gujarat
Hey, I've done what You suggested. We will see, how this will work. First good sign - after flashing with new kernel, I was able to push titanium backup and lucky patcher via properly connected adb (wasn't able to do so on stock kernel in aicp q15, not sure why), while I wasn't able to install it normally via system, despite having all safety ticks turned off.

yeah stock kernel is giving problems so i have changed it in the next build.
 

gwm121

Member
Apr 16, 2020
40
0
note 4 aicp latest version snapdragon uk samsung trite and gapps version
re aicp rom note 4 snapdragon samsung uk trite
i see date march 2020 and a download link for gapps and rom, is this link the latest strable aicp please, is 15 more stable than 14
the gapps is set to arm64 stock vers 9 is this correct
senior poster please reply

i have aicp from 2019 loaded and it is the most stable rom ive found thankyou, only issues are volte (using three and tesco) slow start, and battery draos when powered down.
When originally loaded the camera froxe the system, afte a while it rectified itself!

I have a second note 4 and would like to twrp flash the latest stable aicp
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    New Build with June Security Patch is up..
    5
    New Build is UP, Check OP..
    :good:
    3


    logo_black.png


    AICP
    Android Ice Cold Project

    AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

    Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
    With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
    We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.

    If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!


    Code:
    #include <std_disclaimer.h>
    
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications and if
     * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
     *
     */

    features.png

    Feature list (rough overview)


    credits.png


    In the beginning we would like to thank:

    GZOSP team
    LineageOS & CM (R.I.P.) team
    @maxwen and the rest of the OmniRom team
    DU team
    Resurrection Remix team
    AOSiP team
    Community
    ...

    team.png


    @LorD ClockaN
    @eyosen
    @semdoc
    @SpiritCroc
    @wartomato
    @Miccia
    plus the rest of the crazy bunch that we call "team"
    ...

    downloads.png


    Latest Stable Release Version 15.0


    issues.png


    You tell... :p

    FAQ:
    Before using the ROM:

    Q. Does this ROM support custom kernels officially?
    A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

    Q. Why doesn't this ROM support Xposed?
    A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

    Q. Alright, but I still want to flash Xposed, so which version do I need to install?
    A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .

    Flashing the ROM:
    Q. What do I need to know before flashing?
    A. Check the flashing instructions...

    Q. Can the builds be dirty flashed over each other?
    A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.

    Q. How do I 'dirty flash' builds?
    A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

    Q. How do I flash kernel builds?
    A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
    A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.

    Using the ROM:

    Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
    A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.

    Q. I'm having issues with WhatsApp, how do I fix it?
    A. Read this

    Q. Do I need to provide a logcat if I'm reporting a bug?
    A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)

    Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
    A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
    A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.


    instructions.png


    The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
    If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

    It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
    If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.

    How to flash for the first time:
    (Again: Don't do it if you don't know!)

    1. Download the ROM and GApps and transfer them to your device.
    2. Boot to recovery (TWRP recommended).
    3. Wipe the System, Cache, and Data (you might need to format the data partition!).
    4. Flash the ROM Zipfile.
    5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
    6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
    7. Reboot back into TWRP recovery.
    8. Flash the root solution of your choice (optional).
    9. Reboot your device.
    The procedure may vary from device to device and is a bit different on system updates!


    The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.


    Currently supported Root Solution:

    Magisk stable
    Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
    Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.

    sources.png


    Source
    Kernel source
    Device tree source
    Vendor source

    Additional links:
    My AICP Telegram Channel
    My AICP Telegram Group for discussion and bug reports


    Contributors:
    @ashaykapadiya, @suyogg Helped a lot, @zeelog for device trees,kernel and vendor.

    Thanks to doubleA, Cloudburner and other mido community devs for helping me build roms.


    ROM OS Version: Android 10.0
    Kernel: Linux 3.x

    Version Information:
    Status: Stable
    ROM Firmware Required: Latest stable
    Release Date: 07/03/2020
    Latest Build Date: 12/07/2020

    You want to see a "normal" night at the "DEV office", click here!!
    3
    Latest Update - 12/07/2020

    Changelog: 12/07/2020 Update

    * July Security Patch Merged
    * Moto Dolby Added
    * Latest changes merge from Zeelog


    Changelog: 11/06/2020 Update

    * June Security Patch Merged
    * Wifi Bonding for 2.4ghz
    * Added Camera Libs from Hydrogen
    * Updated wcnss_service
    * Updated Carrierconfig Overlay from tissot
    * Latest changes merge from zeelog
    * Enabled GLONASS
    * Added Google AR Support
    * Fixed Dirac
    * Added support for Vodafone VOLTE



    Changelog: 23/05/2020 Update

    * May Security Patch Merged
    * Updated Dispaly Hals from LA.UM.8.6.r1-04400-89xx.0


    Changelog: 13/04/2020 Update

    * April Security Patch Merged
    * Updated GPS/Media/Thermal/Sensors/Perf/Widevine Blobs From LA.UM.8.6.r1-04000-89xx.0
    * All Latest Changes Merged From Zeelog Trees
    * Fixed Dark Video Recording Issue
    * Improved Network Strength
    * Optimized Shutdown Speed
    * Fixed Advance Control


    Changelog: 12/03/2020 Update

    * Selinux Enforcing
    * Minor Fixes

    Note : Advanced Cotrols will not work on Selinux Enforcing as of now and if you wanna use it then switch to permissive by going to System>Aicp Extras>System Behaviour>Toggle it to permissive and select restore on boot .


    Changelog: 09/03/2020 Update

    * Merged Proper Goodix Fix (Thanks to Zeelog)
    * March Security Patch
    * Added Advanced Control
    * Added Dark Theme Based on Sunrise/Sunset
    * Merged Device Tree Changes Zeelog
    * Merged Kernel Updates From Zeelog
    * Merged Vendor Updates From Zeelog
    3
    Hey, I've done what You suggested. We will see, how this will work. First good sign - after flashing with new kernel, I was able to push titanium backup and lucky patcher via properly connected adb (wasn't able to do so on stock kernel in aicp q15, not sure why), while I wasn't able to install it normally via system, despite having all safety ticks turned off.

    yeah stock kernel is giving problems so i have changed it in the next build.