• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][Android 11][BERYLLIUM] crDroid v7.12 [10.11.2021]

Search This thread

gwolfu

Recognized Developer
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

Flashing Instructions:

Pre-installation:

First time installation:
  • Backup your data to PC, OTG flash drive
  • Flash recovery and boot to recovery
  • Wipe system, data, cache and format data, then reboot to recovery
  • Copy crDroid and Gapps to internal memory then flash them in TWRP in same order
  • Reboot and enjoy :)
  • *Optional reboot again after first boot to flash Magisk for root

Update installation:
  • Boot to recovery and make a backup
  • Wipe system and cache
  • Flash updated crDroid and Gapps (and Magisk if you had this as root method)
  • Reboot and enjoy :)


Do note that crDroid doesn't encrypt your device, so there is no need to flash DFE or any similar stuff that can cause issues!

Sources:
ROM: https://github.com/crdroidandroid
Kernel source: https://github.com/crdroidandroid/android_kernel_xiaomi_sdm845

Download:
ROM https://crdroid.net/beryllium#crDroid-v7
Changelog: https://github.com/crdroidandroid/android_vendor_crDroidOTA/blob/11.0/changelog_beryllium.txt

Known isues:
- none critical


Visit official website @ crDroid.net
crDroid Poco Telegram
crDroid Community Telegram

If you like my work, consider a donation > My Paypal


ROM OS Version: Android 11
ROM Kernel: Linux 4.9
 
Last edited:

gwolfu

Recognized Developer
Encrypt data
As crDroid doesn't enforce encryption, you'll have to flash a special flashable zip in recovery in order to run encrypted
Please follow steps below

Warning Warning Warning --- This works only on clean flash
1. Flash crDroid.zip in recovery
2. Mount vendor partition in recovery (for some reason is not mounting with newer TWRP)
3. Flash encrypt zip
4. Reboot to system

Note:
The encrypt zip needs to be flashed after every update
So flash crDroid zip and follow with encrypt zip

Note2:
Recovery that is able to decrypt data is required in order to see data while booted to recovery
Official TWRP should be alright
 

Attachments

  • encrypt_data.zip
    178 KB · Views: 657
  • encrypt_data_v1.1.zip
    178.1 KB · Views: 578
Last edited:

gwolfu

Recognized Developer
Well gapps for A11 are not quite ready
You'll have to seek a different version of gapps on the web
Note that unofficial opengapps turned to bootloop for me due to some missing permissions
The one posted in op is working but might miss some stuff as it's core version
Until a later date when gapps for a11 are more stable, you'll just have to play and install different versions for your needs
 

arbajmessiali

Senior Member
Aug 23, 2018
90
25
Xiaomi Poco F1
Xiaomi Poco X3 Pro
Well gapps for A11 are not quite ready
You'll have to seek a different version of gapps on the web
Note that unofficial opengapps turned to bootloop for me due to some missing permissions
The one posted in op is working but might miss some stuff as it's core version
Until a later date when gapps for a11 are more stable, you'll just have to play and install different versions for your needs

There's a bug with the Gapps release. Need to setup everything and then restore from the settings.
Will give a brief review after done with the setup.
Thanks dev!
 
Last edited:

Ajudia

Senior Member
Oct 13, 2017
154
28
Good work on first release with most of customisation.
Does app migrate of backup and restore work here?
I have strange problem of any ROM working on custom kernel only, stock kernel fc all app after migrate restore!
 

Anaeijon

Member
May 22, 2013
6
0
Wernigerode
I found, that Bluetooth Audio does not work.
Audio output will not switch to a BT device, once it gets connected.
If you have a media playback in your notifications, you get an Option, to select another output device there. When I select my BT headphones, it does nothing and the BT settings will say, that the connection to the BT device can't be established.

I tested this with multiple BT headphones and a BT speaker.
 
Nov 6, 2013
15
7
OnePlus 7 Pro
Can confirm that Bluetooth connection does not work. Also, did anyone else have their recovery changed to Lineage recovery?! Flashed using TWRP and now it's Lineage recovery. How do I change it back? Guess I'll be Googling.
 

JD. A

Senior Member
Sep 9, 2013
938
266
Can confirm that Bluetooth connection does not work. Also, did anyone else have their recovery changed to Lineage recovery?! Flashed using TWRP and now it's Lineage recovery. How do I change it back? Guess I'll be Googling.
Can't confirm BT yet, the LOS recovery thing happened though. Just use fastboot from pc and flash it again if you don't have root on the device otherwise you can use the twrp app or an app like flashify. A custom kernel or magisk should make twrp stick. You simply can't flash twrp or basically anything through LOS recovery.
 

speter2

Senior Member
Oct 13, 2013
199
21
After "Preparing your phone..." and full white screen appears and i'm blocked. Anyone experienced this issue?

---------- Post added at 09:17 AM ---------- Previous post was at 09:10 AM ----------

Another issue I noticed is that the ROM doesn't recognize my SD-Card. I came from ReloadedOS there works, maybe dev can check commits from them? But if you manage to get into the OS, it is super fast!
 

JD. A

Senior Member
Sep 9, 2013
938
266
After "Preparing your phone..." and full white screen appears and i'm blocked. Anyone experienced this issue?

---------- Post added at 09:17 AM ---------- Previous post was at 09:10 AM ----------

Another issue I noticed is that the ROM doesn't recognize my SD-Card. I came from ReloadedOS there works, maybe dev can check commits from them? But if you manage to get into the OS, it is super fast!
I'm not sure if you mean external SD or internal SD, but for me on stock kernel it recognizes both. My internal SD and my 128gb Samsung micro SD card.
 

MrEvilPanda

Senior Member
Apr 11, 2013
265
78
Banglore
Twrp/fastboot corrupted after installation

Installed the rom and it replaced my twrp recovery. Now i am unable to change the recovery from neither recovery nor fastboot. Whenever i try to sideload any other file, it shows me the following error
"E:footer is wrong
E:Signature verification failed
E: error:21"
 

speter2

Senior Member
Oct 13, 2013
199
21
Installed the rom and it replaced my twrp recovery. Now i am unable to change the recovery from neither recovery nor fastboot. Whenever i try to sideload any other file, it shows me the following error
"E:footer is wrong
E:Signature verification failed
E: error:21"

What I did to get back twrp was the following:
Downloaded the latest official twrp.
Downloaded Minimal fastboot&adb and extracted it.
Copyed the recovery.img to the folder where i extracted fastboot.
Rebooted phone into bootloader.
I typed the following command: 'fastboot boot recovery.img' and i got back into twrp where I used the 'Install Image' to install recovery.

I hope this helps ;)

---------- Post added at 04:24 PM ---------- Previous post was at 04:24 PM ----------

I'm not sure if you mean external SD or internal SD, but for me on stock kernel it recognizes both. My internal SD and my 128gb Samsung micro SD card.

My external SD Card appears as corrupted, even tho in recovery it works fine and when I install other roms i can read/write from/to it without problems.
 

Top Liked Posts

  • 2
    What's this Debloater? To debloat crDroid?
    It is Debloater by NikGapps. To debload any custom ROM. crDroid, Havoc, ... NikGapps can also be easily customized via Config file.
    1
    If you are using NikGApps some folks had reported a similar issue with it. Try FlameGApps. Or even Open GApps.
    crDroid > Debloater > Nikgapps (custom config)
    I did a clean install and no issue on my side.
  • 8
    Build 20211110 is up

    Changelog:
    - Initial crDroid 7.12 code base
    - Updated to November 2021 security patches
    - Misc fixes and overall improvements
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidPoco
    4
    Build 20211110 is up

    Changelog:
    - Initial crDroid 7.12 code base
    - Updated to November 2021 security patches
    - Misc fixes and overall improvements
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidPoco

    Quick settings shortcuts and long presses are still broken.

    Log: https://paste.crdroid.net/WNTumI
    2
    PUBG New State is not working but it works on every other ROM. It also does not work in rooted ROMs & does not work when developer options are enabled.
    This was posted in the crDroid for F1 TG group "Turn off developer options, rename magisk app and freeze magisk with airfrozer app." for the same issue and the user reported it as working.
    2
    What's this Debloater? To debloat crDroid?
    It is Debloater by NikGapps. To debload any custom ROM. crDroid, Havoc, ... NikGapps can also be easily customized via Config file.
    1
    This was posted in the crDroid for F1 TG group "Turn off developer options, rename magisk app and freeze magisk with airfrozer app." for the same issue and the user reported it as working.
    Thank you very much, I will try this out.
    Edit: No root, developer options not turned on. Fresh install but the game is not working.
  • 36
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

    Flashing Instructions:

    Pre-installation:

    First time installation:
    • Backup your data to PC, OTG flash drive
    • Flash recovery and boot to recovery
    • Wipe system, data, cache and format data, then reboot to recovery
    • Copy crDroid and Gapps to internal memory then flash them in TWRP in same order
    • Reboot and enjoy :)
    • *Optional reboot again after first boot to flash Magisk for root

    Update installation:
    • Boot to recovery and make a backup
    • Wipe system and cache
    • Flash updated crDroid and Gapps (and Magisk if you had this as root method)
    • Reboot and enjoy :)


    Do note that crDroid doesn't encrypt your device, so there is no need to flash DFE or any similar stuff that can cause issues!

    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel source: https://github.com/crdroidandroid/android_kernel_xiaomi_sdm845

    Download:
    ROM https://crdroid.net/beryllium#crDroid-v7
    Changelog: https://github.com/crdroidandroid/android_vendor_crDroidOTA/blob/11.0/changelog_beryllium.txt

    Known isues:
    - none critical


    Visit official website @ crDroid.net
    crDroid Poco Telegram
    crDroid Community Telegram

    If you like my work, consider a donation > My Paypal


    ROM OS Version: Android 11
    ROM Kernel: Linux 4.9
    15
    Encrypt data
    As crDroid doesn't enforce encryption, you'll have to flash a special flashable zip in recovery in order to run encrypted
    Please follow steps below

    Warning Warning Warning --- This works only on clean flash
    1. Flash crDroid.zip in recovery
    2. Mount vendor partition in recovery (for some reason is not mounting with newer TWRP)
    3. Flash encrypt zip
    4. Reboot to system

    Note:
    The encrypt zip needs to be flashed after every update
    So flash crDroid zip and follow with encrypt zip

    Note2:
    Recovery that is able to decrypt data is required in order to see data while booted to recovery
    Official TWRP should be alright
    15
    Build 20210103 is ready

    Changelog:
    - Updated kernel to Optimus Drunk 11.2
    - Updated kernel to Linux 4.9.249
    - Rebased on top of latest LOS dt changes
    - Switched to QTI BT
    - Added Pulse
    - Removed old visualizer toggle
    - Added option to customizing the length of gesture navbar
    - Added option to hide gesture navbar (set length to hidden option)
    - Added old style mobile data indicators
    - Fixed battery estimate option from quick settings
    - Fixed lockscreen media art if media is not playing
    - Lots of other changes

    Join the chat on Telegram @ https://t.me/crDroidPoco
    14
    Build 20210509 is ready

    Changelog:
    - Initial crDroid 7.6 code base
    - Updated to May security patches (android-11.0.0_r37)
    - Updated kernel to Optimus Drunk 11.19
    - Added notification / media ticker customization (crDroid Settings -> Notifications)
    - Added "Force Close" button toggle for notification longpress (crDroid Settings -> Notifications)
    - Added lockscreen background blur (crDroid Settings -> Lock Screen)
    - Added toast notification toggle for apps accessing clipboard (crDroid Settings -> Misc)
    - Added Updates channel link to crDroid Settigs -> About (get info on when ROM updates are posted)
    - Fixed force close on app info panel
    - Fixed "Restrict background data" to also restrict activity on wifi
    - Improved opacity customization for notifications
    - Removed Google callback for long screenshot app
    - Tweaked lights control
    - Some other small changes here and there
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidPoco
    14
    Build 20210516 is ready

    Changelog:
    - Different improvements made to performance
    - Updated libs
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidPoco