[ROM][Android 11][OP7tPro] crDroid v7.5 [13.05.2021]

Search This thread

sergjhb

Senior Member
Jul 12, 2017
70
18
ROM is very good but installation is nightmare!!!
Yesterday spent many hours to solve this puzzle.
Looks like there is a lot of changes and one can't simply upgrade from v7.4 and only way is clean install
Short story -
make full backup of your data
Run MSM tool to make phone as from factory and upgrade to 11.0.02 - download full ROM and install 2 times through local upgrade -
this will install 11.0.0.2 to both slots
Than only run install through Fastboot and you have to run it two times - first time it will complain that can't resize partition!!!
After installing ROM to one slot you have to change slot and again install two times.
Yesterday it took around5-6 hr to figure this procedure + some hrs to restore ~100G of data
Othervice ROM is VERY good. Batt drain 5% during the night with 2 active SIM, WiFi, BT and NFC - all ON
 

SohrabHamza

Senior Member
  • ROM is very good but installation is nightmare!!!
    Yesterday spent many hours to solve this puzzle.
    Looks like there is a lot of changes and one can't simply upgrade from v7.4 and only way is clean install
    Short story -
    make full backup of your data
    Run MSM tool to make phone as from factory and upgrade to 11.0.02 - download full ROM and install 2 times through local upgrade -
    this will install 11.0.0.2 to both slots
    Than only run install through Fastboot and you have to run it two times - first time it will complain that can't resize partition!!!
    After installing ROM to one slot you have to change slot and again install two times.
    Yesterday it took around5-6 hr to figure this procedure + some hrs to restore ~100G of data
    Othervice ROM is VERY good. Batt drain 5% during the night with 2 active SIM, WiFi, BT and NFC - all ON
    When you run the bat file the second time what does it say? Does it just magically work? Weird. I went through the same thing yesterday but gave up as it was getting late. May try it again soon.
     

    sergjhb

    Senior Member
    Jul 12, 2017
    70
    18
    When you run the bat file the second time what does it say? Does it just magically work? Weird. I went through the same thing yesterday but gave up as it was getting late. May try it again soon.
    Yes! Second time it running without any problems!
    BTW - TWRP is not working anymore :oops:
    Also found that ADB - USB speed increases from 7-9Mps to 35!
     
    Last edited:

    SohrabHamza

    Senior Member
  • ROM is very good but installation is nightmare!!!
    Yesterday spent many hours to solve this puzzle.
    Looks like there is a lot of changes and one can't simply upgrade from v7.4 and only way is clean install
    Short story -
    make full backup of your data
    Run MSM tool to make phone as from factory and upgrade to 11.0.02 - download full ROM and install 2 times through local upgrade -
    this will install 11.0.0.2 to both slots
    Than only run install through Fastboot and you have to run it two times - first time it will complain that can't resize partition!!!
    After installing ROM to one slot you have to change slot and again install two times.
    Yesterday it took around5-6 hr to figure this procedure + some hrs to restore ~100G of data
    Othervice ROM is VERY good. Batt drain 5% during the night with 2 active SIM, WiFi, BT and NFC - all ON
    Ok the installation was painless for me
    I flashed the copy partitions zip from los recovery (using oos11.0.2(
    Then I formatted user data using los recovery
    Selected install for adb option from the los recovery
    Then I entered
    Code:
    adb sideload <rom.zip>
    Rebooted and booted fine
     
    • Like
    Reactions: mukesh22584

    SohrabHamza

    Senior Member
  • @mukesh22584
    Can you please re-add the vibration intensity customization. Right now it is too strong
    Also I noticed that the FOD sensing area is smaller than that of oos10-11. Please check if you're using the sizes from the 7 series as they are smaller.
    The screen off FOD never works.
    If single tap to show ambient display is enabled, and you touch the screen, the ambient display can be swiped up on causing face unlock to activate. Sometimes this is triggerered inside the pocket which is not good for the phone.

    ----
    Aside from that the ROM is pretty good. Have been using this version and previous versions for a while now.
    THANK YOU!
     
    • Like
    Reactions: vampires.remembered

    SohrabHamza

    Senior Member
  • @mukesh22584 I'm having this weird bug where the power button would take 2 seconds to turn on the screen. Happened 2 times. First time fixed by turning Screen Off Fingerpring off and on, second time by changing navigation modes.
    Also the temperature seems a bit higher than the last version.
    Another thing that I noticed which idk if you can fix is that the laser autofocus does not work. (Both on OPCam and with GCam.)
     

    ElHechicero

    Senior Member
    Dec 1, 2006
    261
    65
    Asturias
    It is the best rom I have tried but this is a Chinese job.

    - I have made a copy of the entire sdcard ...... all day because I have folders with millions of files that is not by size but by quantity ... it takes hours and hours
    - I have formatted userdata from fastboot.
    - Although it already was, I have downloaded the last official Rom, unpacked the payload.bin and flashed in both slots according to LOS indications.
    - I have installed LOS recovery and deleted everything again, and install from sideload copy-partitions-20210323_1922.zip
    - I have unpacked the payload.bin of the last CRDRoid and I have flashed it from fastboot.

    Result: Bootloop into fastboot. And tried "the magic" of doing it 2 times "but same result.

    Also i tried sideload crDroidAndroid-11.0-20210419-hotdog-v7.5.zip. Now the system does boot. It is not a question of doing the installation of the images twice but one with sideloading the ROM. I sincerely believe that instead of so many steps of other roms (LOS) a step-by-step guide should be made from scratch (citing its origin), which does not cost so much, for the success of everyone.

    Sorry for my English. This is the best ROM to our model ( and i also had it on my OP5T, OP6, ...) and the more customizable rom, but installation of last build is very confused.
     
    Last edited:

    andr052h

    Member
    May 14, 2019
    11
    1
    OnePlus 7T Pro
    ROM is very good but installation is nightmare!!!
    Yesterday spent many hours to solve this puzzle.
    Looks like there is a lot of changes and one can't simply upgrade from v7.4 and only way is clean install
    Short story -
    make full backup of your data
    Run MSM tool to make phone as from factory and upgrade to 11.0.02 - download full ROM and install 2 times through local upgrade -
    this will install 11.0.0.2 to both slots
    Than only run install through Fastboot and you have to run it two times - first time it will complain that can't resize partition!!!
    After installing ROM to one slot you have to change slot and again install two times.
    Yesterday it took around5-6 hr to figure this procedure + some hrs to restore ~100G of data
    Othervice ROM is VERY good. Batt drain 5% during the night with 2 active SIM, WiFi, BT and NFC - all ON
    Thanks for the information. Bricked my device just before reading this, so thank you :D
     

    SohrabHamza

    Senior Member
  • It is the best rom I have tried but this is a Chinese job.

    - I have made a copy of the entire sdcard ...... all day because I have folders with millions of files that is not by size but by quantity ... it takes hours and hours
    - I have formatted userdata from fastboot.
    - Although it already was, I have downloaded the last official Rom, unpacked the payload.bin and flashed in both slots according to LOS indications.
    - I have installed LOS recovery and deleted everything again, and install from sideload copy-partitions-20210323_1922.zip
    - I have unpacked the payload.bin of the last CRDRoid and I have flashed it from fastboot.

    Result: Bootloop into fastboot. And tried "the magic" of doing it 2 times "but same result.

    Also i tried sideload crDroidAndroid-11.0-20210419-hotdog-v7.5.zip. Now the system does boot. It is not a question of doing the installation of the images twice but one with sideloading the ROM. I sincerely believe that instead of so many steps of other roms (LOS) a step-by-step guide should be made from scratch (citing its origin), which does not cost so much, for the success of everyone.

    Sorry for my English. This is the best ROM to our model ( and i also had it on my OP5T, OP6, ...) and the more customizable rom, but installation of last build is very confused.
    Felt the same way when I tried the first time. Best was for a guaranteed install (worked for me atleast).
    0) Make sure you're using the right phone and it isn't the McLaren or 7t or some weird carrier phone.
    1) Revert to oos10.3.8 with msmtool
    2) Update to oos11 using inbuilt updater or oxygen updater
    3) Unlock bootloader
    4) Reboot to os then to bootloader and flash los recovery (I used the one included in the second post of this thread)
    5) Reboot to recovery, sideload copy partitions from the lineage os download instructions section for hotdog.
    6) I rebooted to os then to recover but should be optional
    7) Sideload rom.zip using los recovery adb command.
    8) Reboot and enjoy

    Basically lineage os install instructions but with lineage replaced with crdroid and starting from oos11.
     

    sergjhb

    Senior Member
    Jul 12, 2017
    70
    18
    Basically lineage os install instructions but with lineage replaced with crdroid and starting from oos11.
    Quite important!
    11.0.0.2 have to be installed in both slots.
    Make install 11.0.0.2 and reboot - this will change slot and than again install 11.0.0.2 and reboot -
    this will again change slot - now 11 will be in both slots
    You need to clean all traces of A10 from phone!
     

    mukesh22584

    Recognized Contributor
  • Jan 20, 2014
    2,849
    5,836
    Delhi
    New update available:
    • Changelog:
      • device sources rebased on latest Lineage sources
      • updated kernel to Linux 4.14.232
      • Added notification background opacity
      • Fix up notification opacity with animation
      • Fix up alpha scale for notification image view
      • added new refresh rate control
      • updated live display color profile
      • Added switch to select SBC HD by default
      • added Pixel charger animation
      • Optimize Pixel charger animation
    • Flashing instructions also updated, Please read 1st post carefully.
    • Important notes :
      • make sure you're on Oxygenos 11.0.0.2
     

    samrattt

    Senior Member
    Dec 5, 2015
    148
    19
    DHAKA
    OnePlus 7T Pro
    New update available:
    • Changelog:
      • device sources rebased on latest Lineage sources
      • updated kernel to Linux 4.14.232
      • Added notification background opacity
      • Fix up notification opacity with animation
      • Fix up alpha scale for notification image view
      • added new refresh rate control
      • updated live display color profile
      • Added switch to select SBC HD by default
      • added Pixel charger animation
      • Optimize Pixel charger animation
    • Flashing instructions also updated, Please read 1st post carefully.
    • Important notes :
      • make sure you're on Oxygenos 11.0.0.2
    This rom is very good in all aspect..but the kernel is not good i think...it really increase the phone temperature..i am using kirisakura latest kernel with it and it is really a good kernel..phone satays cooler than los kernel.but kirisakura kernel breaks double tap to wake feature.. With all due respect can u sir sip this rom with kirisakura kernel having fixed dt2w feature..??
     

    Top Liked Posts

    • There are no posts matching your filters.
    • 7
      New update available:
      • Changelog:
        • Initial crDroid 7.6 code base
        • Updated to May security patches (android-11.0.0_r37)
        • Added notification / media ticker customization (crDroid Settings -> Notifications)
        • Added "Force Close" button toggle for notification longpress (crDroid Settings -> Notifications)
        • Added lockscreen background blur (crDroid Settings -> Lock Screen)
        • Added toast notification toggle for apps accessing clipboard (crDroid Settings -> Misc)
        • Added Updates channel link to crDroid Settigs -> About (get info on when ROM updates are posted)
        • Fixed force close on app info panel
        • Fixed "Restrict background data" to also restrict activity on wifi
        • Improved opacity customization for notifications
        • Removed Google callback for long screenshot app
        • Switched to OOS volume steps (6 in call and 30 to media)
        • Removed default OOS white FOD and switched back to crDroid stock one
        • Enable Stereo channel support for voip over audio path
        • Some other small changes here and there
        • Updated translations
      • Download link & Flashing instruction in 1st post .
      6
      New update available:
      • Changelog:
        • bump crDroid version to 7.5
        • updated Blobs from OOS 11.0.0.2
        • update kernel on OOS Android 11 source
        • improved auto brightness
        • Implement OOS style effects for LED vibrator
        • added Live display
        • cleanup oneplus settings (only alert slider option available)
        • add long/scrollable screenshot
        • improved faceunlock service
        • add OnePlus Sans font
      • Flashing instructions also updated, Please read 1st post carefully.
      • Important notes :
        • make sure you're on Oxygenos 11.0.0.2
        • format user data is mandatory after flashing rom, So keep all your internal backup first
      6
      New update available:
      • Changelog:
        • device sources rebased on latest Lineage sources
        • updated kernel to Linux 4.14.232
        • Added notification background opacity
        • Fix up notification opacity with animation
        • Fix up alpha scale for notification image view
        • added new refresh rate control
        • updated live display color profile
        • Added switch to select SBC HD by default
        • added Pixel charger animation
        • Optimize Pixel charger animation
      • Flashing instructions also updated, Please read 1st post carefully.
      • Important notes :
        • make sure you're on Oxygenos 11.0.0.2
      2
      I have an error when flashing this rom
      Invalid sparse file format at header magic
      Sending sparse 'system_ext' 1/1 (365444 KB) OKAY [ 8.868s]
      Writing 'system_ext' FAILED (remote: 'No such file or directory')
      Install from fastbootd. Your error is you are on fastboot, not on fastbootd
      1
      ROM is very good but installation is nightmare!!!
      Yesterday spent many hours to solve this puzzle.
      Looks like there is a lot of changes and one can't simply upgrade from v7.4 and only way is clean install
      Short story -
      make full backup of your data
      Run MSM tool to make phone as from factory and upgrade to 11.0.02 - download full ROM and install 2 times through local upgrade -
      this will install 11.0.0.2 to both slots
      Than only run install through Fastboot and you have to run it two times - first time it will complain that can't resize partition!!!
      After installing ROM to one slot you have to change slot and again install two times.
      Yesterday it took around5-6 hr to figure this procedure + some hrs to restore ~100G of data
      Othervice ROM is VERY good. Batt drain 5% during the night with 2 active SIM, WiFi, BT and NFC - all ON
      Ok the installation was painless for me
      I flashed the copy partitions zip from los recovery (using oos11.0.2(
      Then I formatted user data using los recovery
      Selected install for adb option from the los recovery
      Then I entered
      Code:
      adb sideload <rom.zip>
      Rebooted and booted fine
    • 17
      BE3pE0l.png

      Code:
      *** Disclaimer
      I am not responsible for any damage you made to your device
      You have been warned


      crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


      Features: GET from HERE


      Flashing Instructions:

      - Extract ROM.zip & get payload.bin.
      - Extract payload.bin using Payload_dumper.
      - You need latest fastboot tools, So get from HERE
      - In extracted folder Press shift key + right click & select option " Open Command prompt here"

      • Now reboot into FASTBOOTD, How ? follow this...
        • If device is active/on:
        Code:
         adb reboot fastboot
        • If device is in normal fastboot:
        Code:
         fastboot reboot fastboot
      • After rebooting into FASTBOOTD, check you're actually in fastbootD or not ?
        • Now give this command:
        Code:
         fastboot getvar is-userspace
      • If getting return value yes then proceed to next step, if not please figure out issue that's in your end.
      • Now flash each partition
      Code:
      fastboot flash system system.img
      fastboot flash system_ext system_ext.img
      fastboot flash boot boot.img
      fastboot flash odm odm.img
      fastboot flash product product.img
      fastboot flash vbmeta vbmeta.img
      fastboot flash vbmeta_system vbmeta_system.img
      fastboot flash vendor vendor.img
      fastboot flash dtbo dtbo.img

      - Flash using TWRP : Please read TWRP thread .
      - How to root without TWRP: Please read This thread
      - Don't want to read & execute manually then follow THIS POST


      Sources:
      ROM: https://github.com/crdroidandroid
      Kernel: kernel Source

      Download:
      ROM: Click HERE
      GAPPS: Already included
      Changelog: Click HERE

      crDroid Community Telegram.
      If you like my work, consider a donation: My PayPal
      8
      New update available:

      Changelog-:
      - Updated kernel to Linux 4.14.227
      - Enforcing Build (Safetynet passing without Magisk)
      - Removed Extra GBoard space
      - Built with Clang 12.0.4
      - Fixed off screen gesture
      - Adjust layout if FOD is present
      - Added Smart Pulldown
      - Added Fluid lockscreen clock
      - Added Oroño clock
      - Show memory usage in app info
      - Dialer: Dont change accent color for dark theme
      7
      New update available:
      • Changelog:
        • Initial crDroid 7.6 code base
        • Updated to May security patches (android-11.0.0_r37)
        • Added notification / media ticker customization (crDroid Settings -> Notifications)
        • Added "Force Close" button toggle for notification longpress (crDroid Settings -> Notifications)
        • Added lockscreen background blur (crDroid Settings -> Lock Screen)
        • Added toast notification toggle for apps accessing clipboard (crDroid Settings -> Misc)
        • Added Updates channel link to crDroid Settigs -> About (get info on when ROM updates are posted)
        • Fixed force close on app info panel
        • Fixed "Restrict background data" to also restrict activity on wifi
        • Improved opacity customization for notifications
        • Removed Google callback for long screenshot app
        • Switched to OOS volume steps (6 in call and 30 to media)
        • Removed default OOS white FOD and switched back to crDroid stock one
        • Enable Stereo channel support for voip over audio path
        • Some other small changes here and there
        • Updated translations
      • Download link & Flashing instruction in 1st post .
      6
      New update available:
      • Changelog:
        • bump crDroid version to 7.5
        • updated Blobs from OOS 11.0.0.2
        • update kernel on OOS Android 11 source
        • improved auto brightness
        • Implement OOS style effects for LED vibrator
        • added Live display
        • cleanup oneplus settings (only alert slider option available)
        • add long/scrollable screenshot
        • improved faceunlock service
        • add OnePlus Sans font
      • Flashing instructions also updated, Please read 1st post carefully.
      • Important notes :
        • make sure you're on Oxygenos 11.0.0.2
        • format user data is mandatory after flashing rom, So keep all your internal backup first
      6
      New update available:
      • Changelog:
        • device sources rebased on latest Lineage sources
        • updated kernel to Linux 4.14.232
        • Added notification background opacity
        • Fix up notification opacity with animation
        • Fix up alpha scale for notification image view
        • added new refresh rate control
        • updated live display color profile
        • Added switch to select SBC HD by default
        • added Pixel charger animation
        • Optimize Pixel charger animation
      • Flashing instructions also updated, Please read 1st post carefully.
      • Important notes :
        • make sure you're on Oxygenos 11.0.0.2
    Our Apps
    Get our official app!
    The best way to access XDA on your phone
    Nav Gestures
    Add swipe gestures to any Android
    One Handed Mode
    Eases uses one hand with your phone