[ROM][Android 12][OP7T Pro][Official] crDroid v8.10 [20221016] [EOL]

Search This thread

ShevT

Senior Member
Feb 1, 2011
832
1,703
Russia
OnePlus 7T
OnePlus 7T Pro
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

Features

Flashing Instructions:

Pre-installation:
First time installation:
  • Backup your data to PC, OTG flash drive
  • Enter fastboot
  • Flash our recovery in both slot:
  • Code:
    fastboot flash recovery_a <recovery_filename>.img
    fastboot flash recovery_b <recovery_filename>.img
  • Reboot to recovery
  • Do factory reset
  • Back to recovery main page tap Apply update -> Apply from ADB
  • Now sideload <rom_filename>.zip using command:
  • Code:
    adb sideload <rom_filename>.zip
  • If getting message Signature verification failed click Yes.
  • You'll see process stuck on 47%, Don't worry you'll get Success message just wait.
  • Now once again do a Factory reset
  • Reboot
Update installation:
  • Boot to recovery
  • Choose Apply update -> Apply from ADB
  • Now install <rom_filename>.zip via sideload:
  • Code:
    adb sideload <rom_filename>.zip
  • Reboot
Update OnePlus internal firmware:
  • Download latest firmware pack (The link is in the Download section)
  • Reboot to crDroid recovery
  • Update instruction - LineageOS Wiki (From point 4)

Magisk installation:

Downloading the latest release of Magisk (apk file).

After "clean" (initial) installation :
  • After installing the firmware in Recovey mode, we reboot again in Recovery (so that the slot change is applied).
  • Choose Apply update -> Apply from ADB
  • Now install Magisk.apk via sideload:
  • [ CODE]adb sideload Magisk.apk[/CODE]
  • Reboot
  • After booting the system, install the Magisk program itself
After OTA update :
  • After installing the OTA update, we do not reboot the system, but launch the already installed Magisk.
  • Click "Install" (Magisk)
  • Choose a method - "Install to Inactive Slot (After OTA)
  • Tap "LET'S GO ->"
  • After installation - Reboot

Sources:

ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150
Common Device tree: https://github.com/crdroidandroid/android_device_oneplus_sm8150-common
Device tree: https://github.com/crdroidandroid/android_device_oneplus_hotdog
Vendor Common Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_sm8150-common
Vendor Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_hotdog

Download:
crDroid ROM
Recovery Image
OnePlus 7T Pro firmware
Changelog
GAPPS: Already Included

Known issues:
- WiFi display: Sound is not transmitted to some TV models. The sound comes from the phone speakers. 20220730
- OnePlus Camera: Portrait mode 20220708
- OnePlus Camera: Slow Motion Video


Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs


crDroid OnePlus 7T Pro (hotdog) Telegram group
 
Last edited:

mastrok

Member
Mar 23, 2018
36
17
OnePlus 7T Pro
After updating to 8.2. fingerprint option has disappeared . Even though it's working really find for apps and passwords, but the option to add it to the lockscreen disappeared.
 

ShevT

Senior Member
Feb 1, 2011
832
1,703
Russia
OnePlus 7T
OnePlus 7T Pro
I have both of the screenshots you shared also. But the option to choose fingerprint as an unlock method has just disappeared. Not sure why. I upgraded from the updater app cr droid provides. How did you update?
Right. There shouldn't be a print. First you need to select the unlock/encryption method. This is the method if the fingerprint doesn't work.
 

Attachments

  • screen-20220302-122918.mp4
    7.1 MB · Views: 0
  • Like
Reactions: somemadcaaant

mastrok

Member
Mar 23, 2018
36
17
OnePlus 7T Pro
Right. There shouldn't be a print. First you need to select the unlock/encryption method. This is the method if the fingerprint doesn't work.
Great, thank you for your clarification. I still face an issue after adding my fingerprint. That the fingerprint doesnt show on lockscreen. It shows only the pin unlock. So probably there something wrong in my update. I will try clean install and let you know.
 

Attachments

  • Screenshot_20220302-114019_Settings.png
    Screenshot_20220302-114019_Settings.png
    106.1 KB · Views: 266
  • Screenshot_20220302-114042_crDroid Home.png
    Screenshot_20220302-114042_crDroid Home.png
    2.8 MB · Views: 272
Great, thank you for your clarification. I still face an issue after adding my fingerprint. That the fingerprint doesnt show on lockscreen. It shows only the pin unlock. So probably there something wrong in my update. I will try clean install and let you know.
Have you tried holding your finger to the lock button? My finger still unlocks the phone
 

tobasium

Member
Jan 18, 2013
43
5
Stuttgart
OnePlus 7T Pro
Hi together fingerprint works fine for me. But on apps the fingerprint is shown on the wrong positon. The reader ist higher then the logo which is shown. Is there a solution for this?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features

    Flashing Instructions:

    Pre-installation:
    First time installation:
    • Backup your data to PC, OTG flash drive
    • Enter fastboot
    • Flash our recovery in both slot:
    • Code:
      fastboot flash recovery_a <recovery_filename>.img
      fastboot flash recovery_b <recovery_filename>.img
    • Reboot to recovery
    • Do factory reset
    • Back to recovery main page tap Apply update -> Apply from ADB
    • Now sideload <rom_filename>.zip using command:
    • Code:
      adb sideload <rom_filename>.zip
    • If getting message Signature verification failed click Yes.
    • You'll see process stuck on 47%, Don't worry you'll get Success message just wait.
    • Now once again do a Factory reset
    • Reboot
    Update installation:
    • Boot to recovery
    • Choose Apply update -> Apply from ADB
    • Now install <rom_filename>.zip via sideload:
    • Code:
      adb sideload <rom_filename>.zip
    • Reboot
    Update OnePlus internal firmware:
    • Download latest firmware pack (The link is in the Download section)
    • Reboot to crDroid recovery
    • Update instruction - LineageOS Wiki (From point 4)

    Magisk installation:

    Downloading the latest release of Magisk (apk file).

    After "clean" (initial) installation :
    • After installing the firmware in Recovey mode, we reboot again in Recovery (so that the slot change is applied).
    • Choose Apply update -> Apply from ADB
    • Now install Magisk.apk via sideload:
    • [ CODE]adb sideload Magisk.apk[/CODE]
    • Reboot
    • After booting the system, install the Magisk program itself
    After OTA update :
    • After installing the OTA update, we do not reboot the system, but launch the already installed Magisk.
    • Click "Install" (Magisk)
    • Choose a method - "Install to Inactive Slot (After OTA)
    • Tap "LET'S GO ->"
    • After installation - Reboot

    Sources:

    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150
    Common Device tree: https://github.com/crdroidandroid/android_device_oneplus_sm8150-common
    Device tree: https://github.com/crdroidandroid/android_device_oneplus_hotdog
    Vendor Common Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_sm8150-common
    Vendor Device tree: https://github.com/crdroidandroid/proprietary_vendor_oneplus_hotdog

    Download:
    crDroid ROM
    Recovery Image
    OnePlus 7T Pro firmware
    Changelog
    GAPPS: Already Included

    Known issues:
    - WiFi display: Sound is not transmitted to some TV models. The sound comes from the phone speakers. 20220730
    - OnePlus Camera: Portrait mode 20220708
    - OnePlus Camera: Slow Motion Video


    Visit official website @ crDroid.net
    crDroid Community Telegram
    crDroid Updates Channel
    Donate to help our team pay server costs


    crDroid OnePlus 7T Pro (hotdog) Telegram group
    9
    ===== 20220311 =====
    * Dialer: Now similar to OnePlus Dialer
    (There are minor problems with the color in
    the app settings in dark mode.)
    * Dialer: Added additional settings
    * CalleryGO replaced to OnePlus Gallery
    * Camera2 replaced to OnePlus Camera
    * cr settings: Added: Hide power menu on secure lockscreen
    * cr settings: Added: Allow changing the length of gesture navbar
    * cr settings: Added: Allow changing back gesture height
    * cr settings: Added: BurnIn protection
    * cr settings: Added: Show force stop button in the notification's longpress menu
    * cr settings: Added: Keep UDFPS enabled when the screen is off
    * Update graphics blob
    * Update translations
    * Kernel v4.14.270
    * some other fixes and improvements
    8
    ===== 20220408 =====
    * crDroid 8.4
    * crDroid sources synced with LineageOS sources
    * ASB 05042022
    * hotdog: Use 6GB dalvik-heap
    * hotdog: Allow user to disable night light on UDFPS
    * Added: Smart Pixels
    * Added: System Rules
    * Added: Legacy VPN types
    * Added: HeadsUp timeout
    * Added: VPN tile
    * Added: Clear all notification button
    * Added: New LineageOS icons
    * Added: Trust: Add option to always disable USB gadgets
    * Dialer: Fixed dark theme colors
    * Fixed big logo on SetupWizard
    * Fixed Google account login
    * Launcher: Fix gesture navigation fail to move to bottom
    * Update translations
    * some other fixes and improvements
    7
    ===== 20220912 =====
    * Synced with crDroid v8.9 source code
    * Updated security patch level to 20220905
    * Kernel 4.14.292
    * devtree: WiFi: Enable support for IEEE80211AX
    * devtree: Fixed the screen blanking animation when the "Always show time and info" screen setting is enabled
    * devtree: Added Dolby Atmos
    * devtree: Added support additional AC3 formats
    * devtree: Use QCOM implementation for audio effects
    * devtree: Removed AudioFX
    * devtree: Decreasing the maximum vibration level to 4
    * PixelPropsUtils: Update fingerprints to September 2022 release
    * Update statusbar burn-in protection shift base padding when orientation changed
    * Dialer: Fix unnatural animation while move up "Swipe down to reject"
    * Dialer: Added toggle for post call snackbar
    * Dialer: Move Sensor settings to Other settings
    * Some small dark mode fixes
    * Chromium Webview 105.0.5195.79
    * Updated translations
    * Minor fixes...

    Known issues:
    - OnePlus Camera: Slow Motion Video

    >> Download link <<
    or OTA update

    ================
    Donate for my work
    6
    ===== 20220708 =====
    * Camera: Fixed portrait mode
    * Fix QS mobile icon disappearing on theme switch
    * Fix QQS Brightness slider padding
    * Define state for sound tile
    * Enable adaptive AOD brightness
    * Allow disable of screenshot shutter sound
    * Some other various fixes
    * Updated translations

    Known issues:
    - WiFi display: Sound is not transmitted to some TV models. The sound comes from the phone speakers.
    - OnePlus Camera: Slow Motion Video (720P 960FPS)
    - Front camera not working on GCam

    >> Download link <<
    or OTA update

    ================
    Donate for my work