Development [ROM][Android 12L][OOS Cam][OP9Pro] crDroid v8.11 [28.11.2022]

Search This thread

Bugscze

Senior Member
Sep 23, 2011
160
52
Hello @gwolfu and others! :) Thank you for this amazing ROM for OP9P. I was using crDroid on my previous Mi9 so this is smooth transition. But few thing are bugging me (was at Mi9 too but I hope you can sometime resolve them :) )
  • When charging there are stats on lockscreen. But numbers are off (W, V).
  • AoD Brightness cannot be adjusted. AoD can be barelly seen on daylight now.
 

Alex1911

Senior Member
Aug 13, 2013
240
58
Xiaomi Mi Note 10
only to mention, i'm on the latest update, somehow the alert slider works now on my phone. What i did recently is: i at first installed blu_spark R103 on build 20220819. The alert slider worked for a short time and then stopped working. I then started using to "work-around" with "system-Profiles and DnD-mode" to the the to "Silent", "Vibrate" or "Loud". Yesterday i noticed alert slider started working again and is still working after todays update.

What is really strange that there is nothing really to "temporary fix" the alert slider when it is not working, like a restart or such. I attached a log where i switched all alert slider profiles through and also used Top-, Middle- and Bottom-Position. Alert Slider Still works.

I thought i just let you know, maybe it helps you. Log attached
 

gwolfu

Recognized Developer
only to mention, i'm on the latest update, somehow the alert slider works now on my phone. What i did recently is: i at first installed blu_spark R103 on build 20220819. then alert slider worked for a short time and then stopped after i started using to "work-around" with "system-Profiles and DnD-mode". yesterday i noticed alert slider startet working again and is still working after todays update.

What is really strange that there is nothing really to "temporary fix" the alert slider when it is not working, like a restart or such. I attached a log where i switched all alert slider profiles through and also used Top-, Middle- and Bottom-Position. Alert Slider Still works.

I thought i just let you know, maybe it helps you. Log attached
please read latest build changelog
alert slider issue fixed
 

[email protected]

Senior Member
Dec 25, 2013
69
48
34
Pavlodar
4pda.ru
OOS camera have this bugs?
- Switching video 4k 30fps / 60fps / 120fps modes or vise versa have crashdump issue (happens randomly)
- Slow motion and 4K 120fps video mode works but fail to load /
 
  • Like
Reactions: Kydaix

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Build 20221117 is ready

    Changelog: https://crdroid.net/lemonadep/8#changelog
    Download: https://crdroid.net/lemonadep/8

    Join the chat on Telegram @ https://t.me/crDroidOP9
    1
    no willing to force push anyone to crDroid 9, but you should move there as doesn't happen there
    this issue is keystore related and somehow caused by firmware/kernel/android version combo without proper way to reproduce as happens randomly with some and no issues at all with others
  • 36
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn

    Flashing Instructions:
    Pre-installation:
    • OOS 12 firmware is required (from download page, firmware button)
    • Download KIT files (download - this includes dtbo.img and vendor_boot.img)
    • Download recovery (from download page, recovery button)
    • Optional NikGapps core (download - note that you may also need setup wizard addon if you rely on Google restore)
    • Optional Magisk (boot.img used to patch with Magisk in order to get root, can be found in recovery folder from download page)
    First time installation (clean flash):
    • Backup your data to PC, OTG flash drive
    • Make sure you have OOS 12 firmware installed (see above to download)
    • Enter fastboot
    • Flash dtbo.img
    • Code:
      fastboot flash dtbo dtbo.img
    • Flash vendor_boot.img
    • Code:
      fastboot flash vendor_boot vendor_boot.img
    • Flash boot.img
    • Code:
      fastboot flash boot boot.img
    • Boot to recovery (can do from bootloader or with buttons from power off state)
    • Now in recovery go to factory reset and confirm the reset
    • Reboot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload
    • Code:
      adb sideload crDroid.zip
    • Go back to main menu and reboot to recovery to install gapps (if you don't want gapps, reboot to system)
    • To install gapps, simply sideload gapps.zip the same way you installed crDroid.zip then reboot to system
    Update installation:
    Via recovery:
    • Boot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload and reboot
    • Code:
      adb sideload crDroid.zip
    • If you had gapps, reboot to recovery and sideload gapps.zip and reboot
    Via OTA:
    • Go to Settings -> System -> Updater and download latest build
    • Choose install and let it finish
    • If you have Magisk installed, don't click reboot when prompted and go to Magisk and choose install to inactive slot
    • Reboot
    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350

    Download:
    ROM https://crdroid.net/lemonadep

    Known issues:
    - let me know

    Visit official website @ crDroid.net
    crDroid OnePlus 9 Pro Telegram
    crDroid Community Telegram

    If you like my work, consider a donation > My Paypal
    15
    Build 20220826 is ready

    OOS Cam ready baby :)


    Changelog: https://crdroid.net/lemonadep/8#changelog
    Download: https://crdroid.net/lemonadep/8

    Join the chat on Telegram @ https://t.me/crDroidOP9
    14
    Build 20220313 is ready

    Changelog:
    - Updated kernel to Linux 5.4.184
    - Added option to change the length of gesture navbar
    - Added option to change back gesture height
    - Added kill option to notification guts
    - Added burnin protection
    - Added Flipendo (Pixel exclusive extreme battery saver - see battery options)
    - Added smartspace
    - Reverted inclusion of CameraGo (needs gapps and not everyone uses gapps)
    - Further improvements here and there
    - OTA Updater improvements
    - Updated translations

    Note: Pre-patched magisk boot.img has been patched with latest Magisk 24.3, so do make sure to also update Magisk apk

    Join the chat on Telegram @ https://t.me/crDroidOP9
    13
    Build 20220328 is ready marking the debut of Android 12L based crDroid
    With this build, do note that a clean flash is recommended if coming from any other pre 8.3 build
    This update won't be pushed via OTA if you also run any previous crDroid 8.3 build, but all upcoming updates will
    Do also note that it may be possible to not have carrier service in some cases.
    In order to fix that, do install crDroid, boot to it once, reboot to system again and it should get signal then... Still investigating root cause of this.



    Changelog:
    - Initial crDroid 8.3
    - Changed base code to Android 12L
    - Lots and lots of changes to count, so update and check yourself :)

    Join the chat on Telegram @ https://t.me/crDroidOP9
    13
    Thanks a lot for non-gapps build.
    guess anyone can install gapps when they want google stuff added
    so with crDroid 8, we no longer per-bundle gapps