[ROM][Android 12L][OP7Pro] crDroid v8.11 [28.11.2022]

Search This thread

Betoon

Member
Apr 17, 2022
12
0
Have another problem with roaming internet, i have signal shows almost full but have ! Mark over the signal meter and sometimes it works but for short time and like 10kbps speed. I tried to manually choose network but when i click to turn off automatic search it immediately says no networks found without searching for any. Can this build search for them manually?
(Friends have internet on same providers)
 

austinalex23

Member
Oct 3, 2018
18
5
Since the 12 September 2022 update my notification volume has been super loud despite being on the lowest volume. Anyone else experiencing this?
 

austinalex23

Member
Oct 3, 2018
18
5
Audio issues seem resolved with the latest update.

However, I've been getting kicked to the Qualcomm crashdump once every few days for the last several weeks. I was already on the latest firmware but I flashed it again yesterday, and had another crash today.
 
  • Like
Reactions: JaNeBanaNe

Latty

Senior Member
Jun 28, 2007
721
94
For those who patch with magisk after OTA, do you have the "install to inactive slot" option after the OTA is done installing? It seems to disappear from Magisk.
 

almahix

Senior Member
OK you guys I've been around for a very long time but I'm no expert. Not by any means! I accidentally bricked my phone and was able to recover but had to do a wipe when reinstalling CRDroid. It went through the CRDroid setup but not the Google setup. How does one get the Google install instead? I'm also having a storage issue but that is for next time. I Iike CRDroid but like the setup that reinstalls all my apps and settings.
 

undrwater

Senior Member
Aug 1, 2010
492
103
Cerritos
OnePlus One
OnePlus 3T
OK you guys I've been around for a very long time but I'm no expert. Not by any means! I accidentally bricked my phone and was able to recover but had to do a wipe when reinstalling CRDroid. It went through the CRDroid setup but not the Google setup. How does one get the Google install instead? I'm also having a storage issue but that is for next time. I Iike CRDroid but like the setup that reinstalls all my apps and settings.
Should happen if you have Gapps installed (setup wizard for nikgapps). If you do have Gapps installed, try a factory reset. You'll get the crdroid setup first, the the Google setup.
 
  • Like
Reactions: almahix

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    3
    2
    @gwolfu

    Any idea how long will you continue to maintain these builds? Are you ending them in favor of v9 soon?

    Thanks
    🙏
  • 33
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn

    Flashing Instructions:
    Pre-installation:
    • At this time, OOS 11 firmware is mandatory (OOS 12 firmware will result in boot issues)
    • Download recovery (from download page, recovery button)
    • Optional NikGapps core (download - note that you may also need setup wizard addon if you rely on Google restore)
    • Optional Magisk (boot.img used to patch with Magisk in order to get root, can be found in recovery folder from download page)
    First time installation (clean flash):
    • Backup your data to PC, OTG flash drive
    • Enter fastboot
    • Flash our boot.img in fastboot
    • Code:
      fastboot flash boot boot.img
    • Boot to recovery (can do from bootloader or with buttons from power off state)
    • Now in recovery go to factory reset and confirm the reset
    • Reboot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload
    • Code:
      adb sideload crDroid.zip
    • Go back to main menu and reboot to recovery to install gapps (if you don't want gapps, reboot to system)
    • To install gapps, simply sideload gapps.zip the same way you installed crDroid.zip then reboot to system
    Update installation:
    Via recovery:
    • Boot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload and reboot
    • Code:
      adb sideload crDroid.zip
    • If you had gapps, reboot to recovery and sideload gapps.zip and reboot
    Via OTA:
    • Go to Settings -> System -> Updater and download latest build
    • Choose install and let it finish
    • If you have Magisk installed, don't click reboot when prompted and go to Magisk and choose install to inactive slot
    • Reboot

    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150

    Download:
    ROM https://crdroid.net/guacamole

    Known issues:
    - none known

    Visit official website @ crDroid.net
    crDroid OnePlus 7 Pro Telegram
    crDroid Community Telegram

    If you like my work, consider a donation > My Paypal
    16
    Build 20201226 is ready

    Changelog:
    - Added back Backgrounds app
    - Added clear all button on bottom when getting recents apps view
    - Added blur option toggle switch (Settings -> Display -> Enable blurs)
    - Added lock screen clock styles
    - Improved QS icons support with substratum
    - Test fix for cam pop while not in use in some scenarios
    - Set 90Hz as default refresh rate on clean install
    - Updated Gallery2 app
    - Updated vendor blobs from OOS 10.3.7
    - Updated build fingerprint to OOS 10.3.7
    - Switched to release-keys build tag (helps with some apps ex banking apps to not crash)
    - Some more tweaks here and there
    - Some other things I've definetly forgot because of too much beer :)

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    15
    Build 20210418 is ready

    !!! WARNING WARNING WARNING !!!
    --- This version requires clean flashing ---
    --- You have been warned ---

    Before you proceed updating to this build, is mandatory to flash OOS 11.0.0.2 firmware
    Please rely to
    this post to do so (and preserve TWRP)

    - Initial crDroid 7.5 code base
    - Updated to OOS 11 blobs
    - Updated to April security patches (android-11.0.0_r34)
    - Updated kernel to LOS version with our small goodies
    - Updated kernel clang compiler to 12.0.5
    - Enabled SeLinux (Enforcing)
    - Updated Launcher
    - Updated SQLite
    - Rebased on top of LOS device tree
    - Added some more apps to PixelPropsUtils
    - Added option to use primary system color for QS tile icon
    - Added OnePlus Sans font
    - Added OnePlus lockscreen clock style
    - Added screenshot quality setting
    - Added long screenshot option
    - Added OnePlus name as default wifi hotspot name
    - Reworked screenshots menu
    - Fixed 5 GHz wifi hotspot
    - Fixed NFC secure_element crashes
    - Fixed FOD in some use cases (hopefully for good)
    - Fixed double tap to wake in some cases
    - Fixed color profiles
    - Fixed Google hotword enrollment (Hey Google)
    - Some more under the hood fixes
    - Removed Display modes for OnePlus Settings as we now rely on LiveDisplay (Settings -> Display -> LiveDisplay)
    - Removed OP Cam (for now - will get revisited later)
    - Removed encryption for now until TWRP is ready
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    14
    Build 20210124 is ready

    Changelog:
    - Updated kernel to Linux 4.14.217
    - Added option to manually reset battery stats from Settings -> Battery
    - Added fast charge info to Battery info in Settings
    - Added device codename to About version window
    - Added full kernel info on tapping kernel text from About version window
    - Added platform and RAM info to Model & Hardware
    - Added in call vibration options (crDroid Settings -> Notifications)
    - Added navbar height adjustment for back gesture
    - Fixed occasional SystemUI force close when using Network Traffic Monitor
    - Lowered labet text size on Launcher when using 5x5 grid
    - Some other improvements made to Launcher
    - Some other small improvements to stability
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    14
    Build 20210207 is ready

    Changelog:
    - Initial crDroid 7.3 code base
    - Updated to February security patches (android-11.0.0_r29)
    - Updated vendor blobs from OOS 10.3.8
    - Updated build fingerprint to OOS 10.3.8
    - Updated zlib, cpu_features, arm-optimized-routines, giflib, libjpeg-turbo, bionic, art, scudo, vixl, libyuv, libvpx
    - Added option for tint QS Tile with accent color (crDroid Settings -> Quick Settings)
    - Added option to enable AOD on charging only (crDroid Settings -> User interface -> Ambient Display)
    - Added visual voicemail configs from Google Dialer
    - Added option to show pulze (visualizer) on ambient screen (crDroid Settings -> Sound -> Pulse -> Ambient pulse)
    - Added option to show/hide QS footer icons (User account, Edit tiles icon, Running services shortcut, Settings shortcut)
    - Added ambient display edge ligthning options (crDroid Settings -> User interface -> Ambient Display)
    - Added option to suppress notifications sound/vibration if screen is ON (crDroid Settings -> Notifications)
    - Added 4 more FOD animations (Shine, Smoke, Strings, Quantum)
    - Added 2 more FOD icons
    - Increased media volume steps from 15 to 25 (on clean install)
    - Set default voice call volume steps to 7
    - Fixed a possible mount issue for Magisk
    - Some more changes here and there
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro