[ROM][Android 12L][OP7Pro] crDroid v8.8 [16.08.2022]

Search This thread

Bdavidb71

Member
Jun 24, 2016
18
3
Is anyone else experiencing gps problems?
Maps can't find current location. Usually marks a spot I was earlier in the day.
Won't load directions when I want to navigate somewhere until I'm in the road driving if I'm lucky.
 
Dec 8, 2016
48
18
OnePlus 7 Pro
I'm also having gps problems, mine aren't as severe as yours seem to be though. My maps just always says I'm on low accuracy when I start a trip and sometimes lags behind my real location. Then after 5 minutes or so it begins working as normal and is accurate
 

gwolfu

Recognized Developer
Is anyone else experiencing gps problems?
Maps can't find current location. Usually marks a spot I was earlier in the day.
Won't load directions when I want to navigate somewhere until I'm in the road driving if I'm lucky.
Yes same! I can't seem to figure it out and it's preventing me from clocking into work
I'm also having gps problems, mine aren't as severe as yours seem to be though. My maps just always says I'm on low accuracy when I start a trip and sometimes lags behind my real location. Then after 5 minutes or so it begins working as normal and is accurate

installed full gapps?
 

BRANIAC 30

Member
Jun 7, 2018
10
0
Full gapps have some "optimisations" there
Recommend to use core and install rest app from playstore
If I already have the full version what do I need to do to downgrade to core? Can I just flash them or I need to flash the ROM again and then gapps? Before the last update my assistant was working fine but now when I ask a question it crashes.
 

Nikhil

Senior Member
Sep 26, 2012
1,531
2,421
Ahmedabad
OnePlus 7 Pro
Xiaomi Poco X3 Pro
If I already have the full version what do I need to do to downgrade to core? Can I just flash them or I need to flash the ROM again and then gapps? Before the last update my assistant was working fine but now when I ask a question it crashes.
If you want to migrate from full to core you can do it following below steps

> Rename the NikGapps-full.zip to uninstall.zip
> Flash the renamed zip (This will remove the installed gapps components)
> Flash Crdroid (to get the aosp apps which were deleted when you flashed full variant of gapps)
> Reboot to recovery
> Flash NikGapps core
> Reboot

The uninstaller will remove gapps components from system, the apps which got updated from Playstore will require manual uninstalling.

Note: moving back to core will not get your assistant working, you'd have to clean flash for that to work.
 
  • Like
Reactions: BRANIAC 30

BRANIAC 30

Member
Jun 7, 2018
10
0
If you want to migrate from full to core you can do it following below steps

> Rename the NikGapps-full.zip to uninstall.zip
> Flash the renamed zip (This will remove the installed gapps components)
> Flash Crdroid (to get the aosp apps which were deleted when you flashed full variant of gapps)
> Reboot to recovery
> Flash NikGapps core
> Reboot

The uninstaller will remove gapps components from system, the apps which got updated from Playstore will require manual uninstalling.

Note: moving back to core will not get your assistant working, you'd have to clean flash for that to work.
It will be a clean install considering that. Thanks for the guide anyway ^^
 

BRANIAC 30

Member
Jun 7, 2018
10
0
My Google assistant still doesn't work.
I performed a data wipe and flashed the latest 8.5 using adb. Then I installed the core gapps + device health services and setup wizard as addon only. All other Google stuff was downloaded through Google play. The behavior is still the same - the ui shows up and seems responsive but when I ask a question it freezes. Also voice match isn't available for my device it says.

Edit:
After reading the crash log, it seems that I have missing permission to control media. https://paste.crdroid.net/pGRZsD
Considering that I made sure every permission in the settings is allowed but still no success. Maybe there is something that I can do with adb?
 
Last edited:

Danchou-san

Member
Mar 29, 2016
39
5
My Google assistant still doesn't work.
I performed a data wipe and flashed the latest 8.5 using adb. Then I installed the core gapps + device health services and setup wizard as addon only. All other Google stuff was downloaded through Google play. The behavior is still the same - the ui shows up and seems responsive but when I ask a question it freezes. Also voice match isn't available for my device it says.

Edit:
After reading the crash log, it seems that I have missing permission to control media. https://paste.crdroid.net/pGRZsD
Considering that I made sure every permission in the settings is allowed but still no success. Maybe there is something that I can do with adb?
Flashing full gapps fixed the assistant problem with me
 

BRANIAC 30

Member
Jun 7, 2018
10
0
I was with full gapps before but then I was expecting 4%/h battery drain. I want too see first if with core the issue is resolved. If so I am willing to sacrifice my assistant
 

gap30

Senior Member
Aug 10, 2015
311
45
I am on the vanilla version when I open osmand it usually takes a few minutes to find my location but is generally fine for navigation

Good job dev
 

Nikhil

Senior Member
Sep 26, 2012
1,531
2,421
Ahmedabad
OnePlus 7 Pro
Xiaomi Poco X3 Pro
My Google assistant still doesn't work.
I performed a data wipe and flashed the latest 8.5 using adb. Then I installed the core gapps + device health services and setup wizard as addon only. All other Google stuff was downloaded through Google play. The behavior is still the same - the ui shows up and seems responsive but when I ask a question it freezes. Also voice match isn't available for my device it says.

Edit:
After reading the crash log, it seems that I have missing permission to control media. https://paste.crdroid.net/pGRZsD
Considering that I made sure every permission in the settings is allowed but still no success. Maybe there is something that I can do with adb?
You need to flash GoogleSearch addon in conjunction with other addons
 
  • Like
Reactions: BRANIAC 30

Top Liked Posts

  • 1
    Does the:
    "Fix handwave & proximity pulse conflict"
    Have anything to do with the screen's difficulty staying off during a standard phonecall (screen pressed to ear)?
    no
  • 7
    6
    6
    Latest crDroid 8.8 doesn't (at this time of writing) pass SafetyNet CTS due to outdated PixelPropUtils fingerprint.
    So, in order to pass CTS for now, simply use below info.

    In order to pass SafetyNet CTS (until we get PixelPropUtils proper fingerprint after Pixels get it from Google), you'll need the following:
    Install Magisk
    Install MagiskHidePropsConf module
    Install a Terminal app (using Terminal Emulator here but any other should work also)

    Now after all are installed, open terminal app and type following:
    Code:
    su
    props
    5
    n
    type: ro.build.version.security_patch
    press enter
    value: 2022-07-05
    press enter
    y

    Reboot and CTS should now pass
  • 32
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today

    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn

    Flashing Instructions:
    Pre-installation:
    • At this time, OOS 11 firmware is mandatory (OOS 12 firmware will result in boot issues)
    • Download recovery (from download page, recovery button - for clean flash, don't use magisk patched boot.img)
    • Optional NikGapps core (download - note that you may also need setup wizard addon if you rely on Google restore)
    • Optional Magisk
    First time installation (clean flash):
    • Backup your data to PC, OTG flash drive
    • Enter fastboot
    • Flash our boot.img in fastboot
    • Code:
      fastboot flash boot boot.img
    • Boot to recovery (can do from bootloader or with buttons from power off state)
    • Now in recovery go to factory reset and confirm the reset
    • Reboot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload
    • Code:
      adb sideload crDroid.zip
    • Go back to main menu and reboot to recovery to install gapps (if you don't want gapps, reboot to system)
    • To install gapps, simply sideload gapps.zip the same way you installed crDroid.zip then reboot to system
    Update installation:
    Via recovery:
    • Boot to recovery
    • Choose apply update and Apply from ADB
    • Now install crDroid zip via sideload and reboot
    • Code:
      adb sideload crDroid.zip
    • If you had gapps, reboot to recovery and sideload gapps.zip and reboot
    Via OTA:
    • Go to Settings -> System -> Updater and download latest build
    • Choose install and let it finish
    • If you have Magisk installed, don't click reboot when prompted and go to Magisk and choose install to inactive slot
    • Reboot
    For Magisk, I've also included patched boot.img in the recovery folder from download page.
    To install it, just sideload latest stable Magisk.apk and reboot to bootloader and fastboot flash boot magisl-boot.img


    Sources:
    ROM: https://github.com/crdroidandroid
    Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8150

    Download:
    ROM https://crdroid.net/guacamole

    Known issues:
    - none known

    Visit official website @ crDroid.net
    crDroid OnePlus 7 Pro Telegram
    crDroid Community Telegram

    If you like my work, consider a donation > My Paypal
    16
    Build 20201226 is ready

    Changelog:
    - Added back Backgrounds app
    - Added clear all button on bottom when getting recents apps view
    - Added blur option toggle switch (Settings -> Display -> Enable blurs)
    - Added lock screen clock styles
    - Improved QS icons support with substratum
    - Test fix for cam pop while not in use in some scenarios
    - Set 90Hz as default refresh rate on clean install
    - Updated Gallery2 app
    - Updated vendor blobs from OOS 10.3.7
    - Updated build fingerprint to OOS 10.3.7
    - Switched to release-keys build tag (helps with some apps ex banking apps to not crash)
    - Some more tweaks here and there
    - Some other things I've definetly forgot because of too much beer :)

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    15
    Build 20210418 is ready

    !!! WARNING WARNING WARNING !!!
    --- This version requires clean flashing ---
    --- You have been warned ---

    Before you proceed updating to this build, is mandatory to flash OOS 11.0.0.2 firmware
    Please rely to
    this post to do so (and preserve TWRP)

    - Initial crDroid 7.5 code base
    - Updated to OOS 11 blobs
    - Updated to April security patches (android-11.0.0_r34)
    - Updated kernel to LOS version with our small goodies
    - Updated kernel clang compiler to 12.0.5
    - Enabled SeLinux (Enforcing)
    - Updated Launcher
    - Updated SQLite
    - Rebased on top of LOS device tree
    - Added some more apps to PixelPropsUtils
    - Added option to use primary system color for QS tile icon
    - Added OnePlus Sans font
    - Added OnePlus lockscreen clock style
    - Added screenshot quality setting
    - Added long screenshot option
    - Added OnePlus name as default wifi hotspot name
    - Reworked screenshots menu
    - Fixed 5 GHz wifi hotspot
    - Fixed NFC secure_element crashes
    - Fixed FOD in some use cases (hopefully for good)
    - Fixed double tap to wake in some cases
    - Fixed color profiles
    - Fixed Google hotword enrollment (Hey Google)
    - Some more under the hood fixes
    - Removed Display modes for OnePlus Settings as we now rely on LiveDisplay (Settings -> Display -> LiveDisplay)
    - Removed OP Cam (for now - will get revisited later)
    - Removed encryption for now until TWRP is ready
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    14
    Build 20210207 is ready

    Changelog:
    - Initial crDroid 7.3 code base
    - Updated to February security patches (android-11.0.0_r29)
    - Updated vendor blobs from OOS 10.3.8
    - Updated build fingerprint to OOS 10.3.8
    - Updated zlib, cpu_features, arm-optimized-routines, giflib, libjpeg-turbo, bionic, art, scudo, vixl, libyuv, libvpx
    - Added option for tint QS Tile with accent color (crDroid Settings -> Quick Settings)
    - Added option to enable AOD on charging only (crDroid Settings -> User interface -> Ambient Display)
    - Added visual voicemail configs from Google Dialer
    - Added option to show pulze (visualizer) on ambient screen (crDroid Settings -> Sound -> Pulse -> Ambient pulse)
    - Added option to show/hide QS footer icons (User account, Edit tiles icon, Running services shortcut, Settings shortcut)
    - Added ambient display edge ligthning options (crDroid Settings -> User interface -> Ambient Display)
    - Added option to suppress notifications sound/vibration if screen is ON (crDroid Settings -> Notifications)
    - Added 4 more FOD animations (Shine, Smoke, Strings, Quantum)
    - Added 2 more FOD icons
    - Increased media volume steps from 15 to 25 (on clean install)
    - Set default voice call volume steps to 7
    - Fixed a possible mount issue for Magisk
    - Some more changes here and there
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro
    14
    Build 20210124 is ready

    Changelog:
    - Updated kernel to Linux 4.14.217
    - Added option to manually reset battery stats from Settings -> Battery
    - Added fast charge info to Battery info in Settings
    - Added device codename to About version window
    - Added full kernel info on tapping kernel text from About version window
    - Added platform and RAM info to Model & Hardware
    - Added in call vibration options (crDroid Settings -> Notifications)
    - Added navbar height adjustment for back gesture
    - Fixed occasional SystemUI force close when using Network Traffic Monitor
    - Lowered labet text size on Launcher when using 5x5 grid
    - Some other improvements made to Launcher
    - Some other small improvements to stability
    - Updated translations

    Join the chat on Telegram @ https://t.me/crDroidOP7Pro