[ROM][Android 13][CHIME - POCO M3 / Redmi 9T / Redmi 9 Power / Redmi Note 9 4G] crDroid v9.8 [OFFICIAL][15/08]

[MTF96]

Oh that happens to me too, but very rare, what device you used?

Poco M3 64/4

 

[codlihf]

I also have a lot a crashes and full system reboots 20-30s after it finish booting. I tried dirty and clean flashes, first with NikGapps and now BitGapps, with and without Magisk. It's working fine a few day after flashing, then I crashed once, and after that it keeps crashing in loop. Never happened to me before (using CrDroid for 2 years)
Redmi 9T NFC (lime) 4/128

 

[GtrCraft]

9.5 is here:

https://sourceforge.net/projects/crdroid/files/chime/9.x/crDroidAndroid-13.0-20230508-chime-v9.5.zip/download

Changelog:
- Initial crDroid 9.5 release
- Updated to May 2023 security patches (android-13.0.0_r43)
- Added pixel style lockscreen weather based OmniJaws
- opengl: fix resource leak when dlsym failed
- Switch latest clang to 17.0.1
- Updated themed icons
- Updated HarfBuzz to 7.2.0
- Updated translations

 

[MTF96]

These crashes still happens

Hello I have been using crDroid v9.3 3 weeks now on citrus (Poco M3) clean install .... There is some hickups and stutters here and there which needs optimization. I encountered some random serious crashs on System UI which makes me to restart System UI from holding Power button options no big deal but annoying no other problem detected ... I hope I will be fixed ... TNX again

On 9.4 and 9.5 ...

 

[AdamKomang_noob]

These crashes still happens

On 9.4 and 9.5 ...

Have you tried using xiaomi.eu rom? Or is it crdroid specific?

 

[MTF96]

Hi
What do you mean by"tried using Xiaomi.eu "? actually I flashed crDroid version v8.12 and later upgraded to v9.3 since then I was encountering the System UI carshes although using clean install and factory defaults the problem still exists even using the recommended GApps by the author but no difference...

Poco m3 64/4

 

[AdamKomang_noob]

Hi
What do you mean by"tried using Xiaomi.eu "? actually I flashed crDroid version v8.12 and later upgraded to v9.3 since then I was encountering the System UI carshes although using clean install and factory defaults the problem still exists even using the recommended GApps by the author but no difference...

Poco m3 64/4

My apologies, but I guess the problem came from the rom you came from, you could try flashing the stock rom/xiaomi.eu modified stock rom, without relocking the bootloader, then start over from there, flash recovery etc. I had the same problem but with PixelOS, I don't know if it works on you tho.

 

[MTF96]

My apologies, but I guess the problem came from the rom you came from, you could try flashing the stock rom/xiaomi.eu modified stock rom, without relocking the bootloader, then start over from there, flash recovery etc. I had the same problem but with PixelOS, I don't know if it works on you tho.

Thanks for the advice
But I have a good question...
In what way previous installed rom could affect current rom on the device could you please demonstrate?

 

[AdamKomang_noob]

Thanks for the advice
But I have a good question...
In what why previous installed rom could affect current rom on the device could you please demonstrate?

Like vendor files and baseband etc. I had experience with havocOS before, It was bootlooping until I flash the a11 vendor file and restart the installation steps, but some apps keeps crashing, so I flashed the stock rom, and restart the installation steps (again), and then it boots and works normally.

 

[MTF96]

Like vendor files and baseband etc. I had experience with havocOS before, It was bootlooping until I flash the a11 vendor file and restart the installation steps, but some apps keeps crashing, so I flashed the stock rom, and restart the installation steps (again), and then it boots and works normally.

Ok thanks

 

[ZhafKnight]

i have poco m3(citrus0. I was try to install but just get blackscreen after poco m3 logo. i try to install another vendor and stock rom version but it still blackscreen.

 

[MTF96]

i have poco m3(citrus0. I was try to install but just get blackscreen after poco m3 logo. i try to install another vendor and stock rom version but it still blackscreen.

What Custom recovery do you use with your citrus device?

 

[ZhafKnight]

What Custom recovery do you use with your citrus device?

i use orange fox recovery(OFR) unoffficial from https://forum.xda-developers.com/t/...covery-for-poco-m3-unofficial-stable.4535691/
I was try use official one ofr but it get blackscreen(to boot recovery)
my model:m2010j19cg

 

[Prof.HB-69]

i use orange fox recovery(OFR) unoffficial from https://forum.xda-developers.com/t/...covery-for-poco-m3-unofficial-stable.4535691/
I was try use official one ofr but it get blackscreen(to boot recovery)
my model:m2010j19cg

Same with me for the first time, i fixed it by flashing official firmware Android 11 (kind of forget which one)

#edit
Mine was lime not citrus

 

[Prof.HB-69]

Hi i wanna ask why i can't decrypt the partition? (Try dfe file cause bootloops)

Also can i flash custom kernel? I try something else and it get bootloops again

 

[GtrCraft]

9.6 is here:

https://sourceforge.net/projects/crdroid/files/chime/9.x/crDroidAndroid-13.0-20230629-chime-v9.6.zip/download

CLEAN FLASH IS MANDATORY

Changelog:
- Initial crDroid 9.6 release
- Updated to June 2023 security patches
- Due to a source rebase some features are missing, no idea if they come back or not
- Changed to grass kernel, which has kernelsu support

 

[ZhDev]

CrDroid 9.5 won't launch on Redmi 9T lime
Flashed through TWRP.

At startup, the mi logo appears for a couple of seconds and the screen goes blank. Running TWRP is still possible.

What could be the problem?
There were no problems with other custom rom (pixelos) and everything worked

 

[hsnbnjml]

just installed 9.6 stable on poco m3
less than 1.3 ram usable and doesnt feels as smooth as others, what have i done wrong: was on Paranoid, cleanflashed crdroid, then nikk then dfe

 

[Pac-Man]

9.6 is here:

https://sourceforge.net/projects/crdroid/files/chime/9.x/crDroidAndroid-13.0-20230629-chime-v9.6.zip/download

CLEAN FLASH IS MANDATORY

Changelog:
- Initial crDroid 9.6 release
- Updated to June 2023 security patches
- Due to a source rebase some features are missing, no idea if they come back or not
- Changed to grass kernel, which has kernelsu support

Now, if the device is locked with the screen off, the fingerprint sensor doesn't work unless you wake up the device (and then it works and unlocks the phone).

Updating from the 9.5 release on a Redmi 9T.

UPDATE:

Clean flash the crDroid 9.6 release, same bug.

 

[AdamKomang_noob]

Now, if the device is locked with the screen off, the fingerprint sensor doesn't work unless you wake up the device (and then it works and unlocks the phone).

Updating from the 9.5 release on a Redmi 9T.

UPDATE:

Clean flash the crDroid 9.6 release, same bug.

Me too, any workaround?