[ROM][Android 6.0] CyanogenMod13 by ivanich [3.4Kernel][Up-To-Date]

[Ranching]

I did that already, like I said in the post, but it still doesn't work.

Edit: I haven't read the keyboard FAQ section and I just noticed I have a problem with only a keyboard. I'll try it out, but it seems complicated.

 

[ivanich]

I did that already, like I said in the post, but it still doesn't work.

Edit: I haven't read the keyboard FAQ section and I just noticed I have a problem with only a keyboard. I'll try it out, but it seems complicated.

Complicated to create a text file?

Need to put skipswypelibs word into gapps-config.txt in the same folder where the gapps zip file is.

Flash opengaps. Thats all. This was 2 pages back

 

[bertoteo]

Firmware 3.33 PG58IMG.ZIP :
http://forum.xda-developers.com/showthread.php?t=1459767

Digitizer recalibration PG58DIAG.NBH :
http://forum.xda-developers.com/showthread.php?t=2437293

Thanks!:good:
About PG58DIAG.NBH (never used) it ask: Reflash or DIAG. What should I do?

 

[Ranching]

Complicated to create a text file?
Flash opengaps. Thats all. This was 2 pages back

I created the gapps-config.txt with skipswypelibs option and copied it to the root directory of my SD card along with GApps and flashed it, but the keyboard doesn't work again.

Edit: I tried five times by now and nothing works. I put the files in Open-GApps folder, but the same thing. Swypelibs install anyway.

 

[Ranching]

I deleted the Optional folder from the ROM's ZIP file and the keyboard works perfectly now. I still don't get why it didn't recognize the gapps-config.txt file though.

 

[mcfouch]

Thanks!:good:
About PG58DIAG.NBH (never used) it ask: Reflash or DIAG. What should I do?

Waou, it has been a long time since I used this tool...
I remerber that I removed the back cover.
Boot on bootloader (vol down + power) with the file nbh on the root of sdcard.
Use DIAG (vol down), put your phone on the table and don't touch it until the end of the calibration (just few seconds only).
I can't remember if it wipe data only or repartition all emmc... Sure you will lost all.
At the end you will need to switch off the phone by removing the battery, eject your sdcard, start your phone in bootloader (vol down + power), insert your sdcard and start on recovery.
Then format or convert FS of all partitions to fit yours needs and clean flash your rom.

Edit : of course remove the nbh file from the root of sdcard.

 

[Ranching]

One more question. How do I root my device now that I have this ROM installed? I tried Kingo Root and perm root option of Sensation All-in-One Kit with updated adb files, but it doesn't work.

 

[bertoteo]

Waou, it has been a long time since I used this tool...
I remerber that I removed the back cover.
Boot on bootloader (vol down + power) with the file nbh on the root of sdcard.
Use DIAG (vol down), put your phone on the table and don't touch it until the end of the calibration (just few seconds only).
I can't remember if it wipe data only or repartition all emmc... Sure you will lost all.
At the end you will need to switch off the phone by removing the battery, eject your sdcard, start your phone in bootloader (vol down + power), insert your sdcard and start on recovery.
Then format or convert FS of all partitions to fit yours needs and clean flash your rom.

Edit : of course remove the nbh file from the root of sdcard.

Thanx, already did that (Vol-down to DIAG and then restored a backup) and it fixed my problem! And yes, the procedure wipe all data.
My doubt was about the first option "Power to Reflash", what it does?!

Merci beaucoup! :highfive::highfive::highfive:

 

[mcfouch]

Thanx, already did that (Vol-down to DIAG and then restored a backup) and it fixed my problem! And yes, the procedure wipe all data.
My doubt was about the first option "Power to Reflash", what it does?!

Merci beaucoup! :highfive::highfive::highfive:

I don't really know. Perhaps it flash PG58IMG.zip if also on sdcard...
happy for you that fixed your problem.

 

[henbruas]

One more question. How do I root my device now that I have this ROM installed? I tried Kingo Root and perm root option of Sensation All-in-One Kit with updated adb files, but it doesn't work.

Root is built into Cyanogenmod I believe, there's an option to enable it in the developer settings.

 

[DmitryKulakov]

Rumrunner seems to be so easy !
Anyway you will need at least a system with a device detected by fastboot command.
If that is stopping you how you will flash recoveries with fastboot to play with this old phone ?
All is here : http://forum.xda-developers.com/showthread.php?t=2751187
Make a Linux live bootable usb key with this : http://www.linuxliveusb.com/fr/home or https://unetbootin.github.io/
And come back to tell us you are an happy free HTC Sensation owner !

LiveCD (with 32bit Ubuntu on a PC with USB 2.0) and rumrunner just worked fine, except that after a few successful steps it said that my current ROM (which is CM13) is not supported presumably .

With TWRP as my current recovery I can rollback to some CM12 backups, but I am not sure they are supported. And I have no big wish to restore the stock ROM only in order to get S-off. Right now I can always flash new boot.img with Flashify, when necessary.

Thanks for the tips anyway!

 

[Narkolai]

Hello dear Ivanich! Prompt can work the FM radio?

 

[mcfouch]

LiveCD (with 32bit Ubuntu on a PC with USB 2.0) and rumrunner just worked fine, except that after a few successful steps it said that my current ROM (which is CM13) is not supported presumably .

With TWRP as my current recovery I can rollback to some CM12 backups, but I am not sure they are supported. And I have no big wish to restore the stock ROM only in order to get S-off. Right now I can always flash new boot.img with Flashify, when necessary.

Thanks for the tips anyway!

Now you could easily flash back to 4ext recovery with fastboot, install an ICS Sense rom to run Rumrunner, get back on TWRP and restore your previously made backup.
So you have now the necessary autonomy to definitely get rid of this S-ON

 

[bertoteo]

cm-13.0-20160228 app phone call dialer crash.
What about "wipe battery stat" in TWRP like 4ext recovery?

 

[ivanich]

cm-13.0-20160228 app phone call dialer crash.
What about "wipe battery stat" in TWRP like 4ext recovery?

http://www.androidcentral.com/wiping-battery-stats-doesnt-improve-battery-life-says-google-engineer
It do nothing except placebo effect.

 

[hpsh]

Can't flash CM13

I couldn't never install CM13 on my htc sensation. It sticks on cyanogen logo. I can easily install CM12.1 on my phone. My phone is S-on. Is it related to S-on or S-off?

 

[ivanich]

I couldn't never install CM13 on my htc sensation. It sticks on cyanogen logo. I can easily install CM12.1 on my phone. My phone is S-on. Is it related to S-on or S-off?

We need bigger fonts!!!
read FAQ

 

[vagdesign]

I wanted to thank @ivanich for the effort, I'm enjoying Android 6 on my Sensation since yesterday.
The steps I did was:
1) Unlock the Bootloader, then install 4ext recovery and get rooted.
2) Install ViperS 5.2.1 and get S-OFF with this method
3) Download today's version of CM13 and also today's version of GApps, install ROM and then GApps with Aroma installer without booting to ROM.
4) Install User Apps on SD-EXT MOD from here

So, I wanna thank you all who did your part for us to enjoy out beloved phone for more time than even HTC expected

Cheers and greetings from Greece.

 

[ivanich]

I wanted to thank @ivanich for the effort, I'm enjoying Android 6 on my Sensation since yesterday.
The steps I did was:
1) Unlock the Bootloader, then install 4ext recovery and get rooted.
2) Install ViperS 5.2.1 and get S-OFF with this method
3) Download today's version of CM13 and also today's version of GApps, install ROM and then GApps with Aroma installer without booting to ROM.
4) Install User Apps on SD-EXT MOD from here

So, I wanna thank you all who did your part for us to enjoy out beloved phone for more time than even HTC expected

Cheers and greetings from Greece.

So you was able to install cm13 with 4ext recovery? Nice :good:

 

[vagdesign]

Yes, at first I used 4ext to install MIUI 7 - 5.10.23 and then tried your last 3 versions of CM3.
The only bug (I don't know why this happen) is that on some installations, if you try to reboot or shut down and boot again, the phone stucks at the white HTC screen.
Only solution is to remove the battery, boot into recovery, install All Data on SD-EXT and reboot.