lol
@mike1986. Can you please tell me an app for showing me the voltage table for each CPU frequency ? Or do you have the original voltage settings from the original kernel for HTC Desire HD ?
I want to compare the voltages to other kernels... A lot other when I take pictures with flash, and my battery is under 40%, the phone shuts down.. I have a new battery, so it's not the battery fault.... Using this amazing ROM and Kernel, everything is OK. I just want to compare the Voltage Table used for every CPU frequency..
Thanks.....
uv cpu won't help you much. for battery drain you should address your apps
Sent from my GT-I9505
If you have read the post correctly , you'll understand that is not a battery drain issue.... Is a voltage table , or better to say is undervolting.... A lot of "developers" put higher frequency, using the same voltage.... So for 1200 Mhz they use the same voltage like 1000 Mhz. In this case the phone shuts down when take a picture using flashlight, and you don't have much power on battery. So the time you take picture and flashlight does an "impulse", the phone in that moment is used at 100%, so CPU needs correct power.... If CPU does not have enought power (voltage is low) the phone shuts down. I tested this and this is the way it goes...
So my point was to find the original voltage table , to have the right voltage for every cpu frequency.... "the stock one if possible"
Found this in the first post:
http://dl.xda-developers.com/attach...5/3/Frequencies___VDD_for_CPU_klquicksall.txt
I used "voltage control" from play store to see voltage table. IMO ARHD should be at stock voltage control. I've hardly seen any developer release a ROM or kernel that is UV/OV out-of-the-box, since every phone is a bit different and act differently on same voltage, e.g. some can be undervolted to -75 and work fine, some just freeze. Usually i undervolted -50 and everything was okay.
Yeah, man , this ROM is ok...I tried a lot others, and almost all of them used "a wrong" voltage table.... and there are two or three different Desire HD hardware on the world market ... That's why for me undervolting does not work like for others....
@r100 Thanks for that, I didn't saw that on first page.... What a shame
rcmix 12.2 kernel used in this ROM is undervolted
I have a problem with the 600MHz voltage on this kernel
and since daemon controller does not stick voltages after reboot I switched to lordmod kernel which has higher voltages
anyway, I really should move to a new phone
getting lots of random reboots (most due to overheating, so gaming is not possible, GPS not possible, internet somewhat possible) and quite laggy
also at one point it went into a reboot frenzy and corrupted my sdcard (lost every file inside a folder, but not on the root of the sdcard)
I noticed too late and most of the files cannot be recovered, good thing I had a backup of my pictures, but that's abt it; everything else gone
I have a problem with the 600MHz voltage on this kernel
and since daemon controller does not stick voltages after reboot I switched to lordmod kernel which has higher voltages
anyway, I really should move to a new phone
getting lots of random reboots (most due to overheating, so gaming is not possible, GPS not possible, internet somewhat possible) and quite laggy
also at one point it went into a reboot frenzy and corrupted my sdcard (lost every file inside a folder, but not on the root of the sdcard)
I noticed too late and most of the files cannot be recovered, good thing I had a backup of my pictures, but that's abt it; everything else gone
Hi i have a question. If i open the camera Logcat is getting spammed with this:
how can this be resolved? I try to develop an app which uses the camera and this is somewhat uncool. :/
i Use ARHD 9
Code:
05-05 18:16:01.349: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:01.449: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:01.549: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:01.649: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:01.738: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:01.848: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:01.968: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.068: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.098: D/dalvikvm(23780): GC_EXTERNAL_ALLOC freed 68K, 52% free 3608K/7367K, external 2673K/2740K, paused 36ms
05-05 18:16:02.148: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.258: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.258: D/dalvikvm(23780): GC_EXTERNAL_ALLOC freed 5K, 52% free 3609K/7367K, external 3385K/3516K, paused 41ms
05-05 18:16:02.358: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.468: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.558: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.668: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.758: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.878: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:02.958: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.068: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.168: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.238: D/StatusBarPolicy(1440): Network Type: 8
05-05 18:16:03.268: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.378: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.468: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.567: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.657: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.767: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.877: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.967: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:03.997: D/dalvikvm(23780): GC_EXTERNAL_ALLOC freed 11K, 51% free 3635K/7367K, external 3829K/3872K, paused 42ms
05-05 18:16:04.067: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.167: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.267: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.367: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.477: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.557: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.677: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.767: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.867: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:04.967: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)
05-05 18:16:05.067: E/QualcommCameraHardware(5341): PmemCacheFlush : mPmemType 15 ioctl(PMEM_CACHE_FLUSH) error Invalid argument (22)how can this be resolved? I try to develop an app which uses the camera and this is somewhat uncool. :/
i Use ARHD 9
is there a plan to upgrade the version of Android Revolution HD 2.3.5 to a kitkat version4.4.x that will run on DHD?
For sms screen on ,you can install sms apps such as GO sms from playstore...
Search on playstore for camera apps that supports panaroma mode :highfive:
I'm looking for the ones from lyapota. Are there any similar mods for 7.3 base as there are for 6.xx?
Check this link, you may find that you look for
http://forum.xda-developers.com/showthread.php?t=1613775
Similar threads
- Locked
- Poll
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
1004[ROM] Android Revolution HD 7.3 & 9.2 | High Quality & Performance | O/C | Legendary
Proudly presenting you the most popular ROM for HTC Desire HD & HTC Inspire 4G...
"My phone is now perfectly smooth, fast, stable. I do not expect much more from my phone!"
DarkAdrien
"This release is amazing! ROM feels super fast! Great job Mike & the team! (...) Never noticed any lag. 1 word: brilliant."
Selec1
"Feels a lot smoother in use - scrolling, swiping between sense screens. Much nicer feel. This is a real good one, Mike. Many thanks"
dsm52
System details:
- Android 2.3.5 (Gingerbread) - latest official HTC Sensation XL 1.05.401.4 (WWE) firmware
- Android 2.3.5 (Gingerbread) - latest official HTC Desire HD 3.12.405.1 (WWE) firmware
- This is improved version of stock ROM - no visual changes!
- Very fast, clean & stable!
- Full HTC Sense 3.5 Interface
- Multi-language (WWE)
- For HTC Desire HD & HTC Inspire 4G
- Thanks to HTC for the base firmware
- Video Review by Flow-Wolf
- Video Review by DeviceCustomizer
- Video Review by Sany789
Included kernel details:
- New kernel: 2.6.35.14 (under-volted & tweaked)
- CPU up to 1.61 GHz (1.15 GHz by default) - controlled automatically by built it O/C Daemon. How to use O/C Daemon?
- If you want to control CPU manually, you would need SetCPU from here: SetCPU
- In SetCPU remember to check "Set on Boot", but using O/C Daemon gives much better performance and battery then SetCPU
- Many CPU governors (SmartAss, Ondemand, Performance, Conservative, UserSpace)
- GPU+ patch (Improved 2D & 3D Graphics performance - Thanks to -snq)
- V(R) I/O as default scheduler
- SLQB Memory Management
- CIFS, TUN & UTF8 support
- LZMA compression
- Wi-Fi module improved drivers
- 2-way recording patch
- Possibility to change VDD levels dynamically - check question 21 in FAQ
- Code cleaned up with custom voltages, tweaks & many more!
- Kernel source
ROM details:
- Removed software (CPU) rendering - full Adreno200 (GPU) rendering
- Fully optimized and tweaked
- Root access
- Unsecured boot.img
- Newest BusyBox
- RAM optimizations
- System signatures check enabled for system security and safety
- Improved virtual memory management
- Speed optimizations
- Enabled GPU UI rendering
- SD Card speed tweak
- Data, cache and system partitions mounting tweaks
- Bloatware applications removed
- All /system applications updated to latest available
- All /data applications updated to latest available
- Improved CPU governors performance
- Most optimal system scheduler
- Disabled kernel debugging for better performance
- Zipaligned (Improved RAM management)
- Zipalign on boot (for user applications on data partition)
- Fully de-odexed
- init.d scripts (BusyBox run-parts) support
- Auto init.d permissions set on boot
- sysro/sysrw commands support
- Excellent battery life!
- Improved EXT4 performance
- OpenVPN support
- Most up-to-date system files permissions
- Adobe Flash Player support
- Support almost 24h a day
- ...and many more!
You need:
- For HTC Desire HD S-OFF ---> [TOOL] One click ENG S-OFF
- For HTC Inspire 4G S-OFF ---> [GUIDE]Inspire 4G, Rooting, Flashing, Softbrick, Fixes, Sideloading
- S-OFF in order to flash new radio ---> [TOOL][VIDEO] One click Radio S-OFF, SimUnlock (Easy Root Guide)
- Read this flashing guide - [GUIDE] How to flash a ROM onto your Desire HD
How to flash:
- Download ROM and place it on your SD card
- Boot your phone in recovery mode (vol down + power)
- In main menu, select "install zip from sdcard"
- Select "choose zip from sdcard" and browse to the location of Android Revolution ROM
- You can use data wiping option in AROMA (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)
- After flashing process is complete, reboot the device
Android Revolution HD 9.2
--- release date: 21 December 2013 ---
- If your current firmware version doesn't match ROM firmware version, wiping data inside AROMA is highly recommended!- De-odexed using newest smali/baksmali
- Other minor changes and fixes
- Included and updated applications:
- Remember to remove SetCPU or any other CPU tuner in order to have O/C Daemon working. Read this post to learn about O/C Daemon
Android Revolution HD 7.3
Android Revolution HD 9.2
Set CPU clock back to 1.0 GHz
--- Flash this, if you can't boot your device after flashing ROM ---
Radio
--- With 7.x & 9.x ROMs I strongly recommend flashing 12.65.60.29_26.14.04.28_M radio ---
--- Don't flash RADIO from ClockworkMod recovery! Extract downloaded file and read the guide inside! ---
Important notes:
1. If you want to say "Thanks!"
There are many ways to show your support to the developer. You can:
- Press the "Thanks" button.
- Hit the donation button and "buy me a beer".
- Share your opinion about my work and write some feedback in respective thread.
- Advertise my work to your friends.
- Rate my thread with 5 stars.
2. Sharing policy
This forum is about sharing. If you want to use any part of my work, please feel free to do it but remember about some simple rules:
- Inform me about using my work by sending me a message. You don’t need my permission, just inform me.
- Include link to my thread from where you took particular files.
- Give proper credits for what you used.
- When it comes to using my ROM as a base you are free to do it only if I don't have "Stock ROMs" thread available for particular device. If such thread exists, you are
obligated to take ROMs from there instead. These threads with "Stock ROMs" are usually updated within 24 hours from the moment when I release my custom ROM.
Sharing is one thing, but please respect some areas of my work like:
- ROM name - "Android Revolution HD", "Android Revolution", "Revo HD", "AR HD" etc.
- Graphics used in my threads, especially head-banners designed exclusivity for me.
- Other parts of my work that are not supposed to be used by others without proper permission.
3. Support
If you have any issues or questions, please feel free to post them in the respective thread. Due to my commitments in real life I can't answer every PM, tweet or facebook post.
If you want to get the fastest and the best answer - ask the question in the thread. Every month I need to remove about 1.000 new messages from my XDA inbox. I’m sure it’s better if I spend this time cooking new ROMs.
4. Signature banners for users
Due to the increasing number of users flashing my ROMs we introduced some time ago 3 special groups of members.
- Android Revolution HD Recognized User – every user might get this rank with proper banner by being active in my thread (or threads).
Helping users to solve problems, answering questions or preparing threads with add-ons for Android Revolution HD are the most common ways to gain this rank. Just be active and we’ll contact you!
- Android Revolution HD Advanced User – every user might get this rank with proper banner by doing some amazing modification, application, theme etc. for Android Revolution HD.
Creating simple bootanimation might not be enough, but you never know! Having Recognized User status before is not needed!
- Android Revolution HD Supporter – every user who shared some server space with us (with proper bandwidth) will get this banner. Please keep in mind we can't use DropBox shared folders.
What we can use is minimum 20 GB of space and 10 Mbit upload speed. If you want to donate some server space to us, please contact me via private message.
Finally, thanks for using my work! I hope you will enjoy Android Revolution HD!
318Ported ROMs section
--- User banners prepared by KID_1194, adsamcik, sigeltek & jotha ---
Q 2: My Premium Navigation doesn't work correctly. What should I do?
A: Your Premium Navigation may not work correctly for many reasons. Most of them are not ROM related. You can try the following things:
- reinstall your Locations under "Settings" ---> "Locations"
- remove /sdcard/.data/navigator/Data/Temporary from your SD card
- re-download Google Maps from the Android Market
- clear data from Google Maps in system software management
Q 4: After I reboot my device, mp3 ring-tone is back to default. What should I do?
A: Go to Ringtones > Menu > More Ringtones > Create new ringtone > Select the one you want (Thanks to kill4l)
Q 6: After flashing Android Revolution HD my SD card is being mounted as ready only. What should I do?
A: Connect your SD card to your PC and do defragmentation process. If you still have some problems with SD card, please read this.
Mac users can use the repair function of the MacOS disk utility to solve the read only problem (Thanks to Calimero1205).
Q 8: Do I need to wipe data partition when upgrading from old version of Android Revolution HD?
A: I always recommend wiping data partition but it's absolutely necessary only if I mention that in the changelog. But normally you can live without it.
Wipe data partition if you experience any issues.
Q 10: I had SetCPU installed on Android Revolution HD, then I flashed new version of AR HD and SetCPU doesn't work any more. How to fix it?
A: Please reinstall SetCPU.
Q 12: My phone got random freezes or reboots. How can I fix it?
A: Every CPU is different. It seems that your CPU doesn't like OC or UV (undervolt). Set your CPU to default 1GHz.
If it doesn't help, then you need to flash default kernel from the second post.
Q 14: My GPS signal is very weak or GPS is not working at all. How can I fix it?
A: There are some solutions:
1. You can download and install FasterFix to improve your signal strength.
2. You can download and install GPS Status & Toolbox to manage your GPS settings.
3. Turn off "Fast boot" under "Settings" ---> "Power" and reboot your phone.
4. Read this, this, this & this
5. [Trick] Speed Up Satelite Fix for GPS on Android
Q 16: My Quadrant score is not as high as on different ROM. What does it mean?
A: It means absolutely nothing. Benchmarks on Android System are more or less lottery and they are not showing the real system performance.
There are many settings that can force Quadrant to show more then 3000 points but it's faked performance, that actually can slow down your phone in some circumstances.
What I always emphasize is a real performance, the one you can feel under your fingers. Remember that I/O has some limit and surpassing it shows just a numbers without true ratio.
Also keep in mind that Quadrant has support for Android Gingerbread only in version 1.1.7 and higher.
Q 18: My screen-lock sound and keypad sound while dialing numbers is very low. How can I fix it?
A: Download "Quick Settings" application from Android Market and check system volume slider.
Q 20: My Wi-Fi doesn't reconnect automatically after boot. How to fix it?
A: Disable fastboot in settings or check this solution.
You think you're addicted from flashing ROMs, checking forum the whole day and you feel like "Android" should be your second name? Well, here's something for fun
preacher65 said:Whiskey103 said:DarkAdrien said:My wife is pregnant for 4 months, ETA October 22nd (her upload speed is not so good). If only I could do a nandroid backup of my current life to be able to restore it after
308no-Sense script for all versions of Android Revolution HD | Themes | Extras |
--- All extras listed here with meta-inf folder inside the .zip archive needs to be installed via ClockworkMod recovery!
--- After every ROM update please check first, if the theme or mod you used to flash is still compatible with current ROM version ---
Boot Animations:
Download bootanimation.zip and place it on \data\local on your device.
Custom modifications:
For 6.3.x ROMs
- Advanced Power Menu (version 0.1) for Android Revolution HD 6.3.x (Thanks to lyapota)
- CRT Screen-on / off Animation (version 0.1) for Android Revolution HD 6.3.x (Thanks to hamdir)
- Ultra Smooth Rosie (version 0.1) for Android Revolution HD 6.3.x - Full flat widgets, 3D Sense launcher smoothness is locked 60fps (Thanks to hamdir)
- Super Smooth Rosie (version 0.1) for Android Revolution HD 6.3.x - Semi 3D widgets, 3D Sense launcher 90% as smooth as ultra (Thanks to hamdir)
- Modified Quick Settings XL (version 0.1) for Android Revolution HD 6.3.x (Thanks to sigurd_LU)
- %battery mods for Android Revolution HD 6.3.x (Thanks to Mojowaex)
- Arabic language support (version 0.1) for Android Revolution HD 6.3.x (Thanks to Madmack, Brightidea & D69K)
For 6.1.x ROMs
- Advanced Power Menu (version 0.2) for Android Revolution HD 6.1.x (Thanks to lyapota)
- Arabic language support (version 0.1) for Android Revolution HD 6.1.x (Thanks to Madmack, Brightidea & D69K)
For 5.2.x ROMs
- Advanced Power Menu (version 0.1) for Android Revolution HD 5.2.x (Thanks to LeeDroid)
- Modified Quick Settings (version 0.1) for Android Revolution HD 5.2.x (Thanks to Dude360 & FInixNOver)
- Modified Quick Settings XL (version 0.1) for Android Revolution HD 5.2.x (Thanks to Dude360)
- Modified Quick Settings (version 0.1) & No Recent Applications mod for Android Revolution HD 5.2.x (Thanks to Dude360 & FInixNOver)
- Modified Quick Settings XL (version 0.1) & No Recent Applications mod for Android Revolution HD 5.2.x (Thanks to Dude360)
- No Recent Applications mod for Android Revolution HD 5.2.x (Thanks to Dude360)
- Restore HTC Lock-Screen for Android Revolution HD 5.2.x - if you have deleted HTC Lock-Screen or if you want to have it back on no-Sense ROM
- Enable SiP over 3G network for Android Revolution HD 5.2.x (Thanks to seo)
- Arabic language support (version 0.5) for Android Revolution HD 5.2.x (Thanks to Madmack, Brightidea & D69K)
- Hebrew language support for Android Revolution HD 5.2.x - first flash ROM, boot it, restart and flash this file. (Thanks to liorra3)
For all ROMs
- Remove HTC Lock-Screen for Android Revolution HD [all versions] - now you can use Android stock lock-screen
- Keyboard mod [all versions] - no arrows, bigger letters & much more customizable. Original thread is here
- Revolution fonts (mod from Windows 7) for Android Revolution HD [all versions] (Thanks to he_stheone64)
Content for UOT kitchen:
- Framework content from 6.1.x ROMs - you can use it in this UOT kitchen to customize my ROM
- Framework content from 5.2.x ROMs - you can use it in this UOT kitchen to customize my ROM
Others:
- [BATTERY]%STOCK Battery [SKIN]PureBlack [MOD]PowerNotificationMOD - simple and great mods created by Krzysiec
- Wallpapers pack made by twioe - Home Page is here
- Wallpapers pack made by amresh
- Wallpapers pack made by atticus182 - Home Page is here
141
With Android Revolution HD you can choose, if you want to use SetCPU to manually control CPU speed and governors
or
you can let it be done by new O/C Daemon made by rmk40.
This solution gives much better performance !!!
If you decide to use SetCPU, the O/C daemon wont affect you in any way, it will be not active.
If you want to use O/C Daemon, then read this small guide:
(1) Remove any O/C tools like SetCPU, NoFrills, CPU Tuner, CPU Master, Faux Clock etc. and reboot your device 2 times ! Otherwise O/C Daemon will be disable.
(2) With O/C Daemon the frequencies are following:
* wake_min_freq = minimal frequency for device when screen is ON
* wake_max_freq = maximal frequency for device when screen is ON
* sleep_min_freq = minimal frequency for device when screen is OFF
* sleep_max_freq = maximal frequency for device when screen is OFF
* wake_governor = governor for device when screen is ON (I do not recommend changing it)
* sleep_governor = governor for device when screen is OFF (I do not recommend changing it)
HTC Desire HD / HTC Inspire 4G / HTC Incredible S
==============================
wake_min_freq = 230400 (230 MHz)
wake_max_freq = 1152000 (1.15 GHz)
sleep_min_freq = 230400 (230 MHz)
sleep_max_freq = 384000 (384 MHz)
==============================
HTC Sensation / HTC Sensation 4G / HTC Sensation XE
==============================
wake_min_freq = 384000 (384 MHz)
wake_max_freq = 1512000 (1.51 GHz)
sleep_min_freq = 192000 (192 MHz)
sleep_max_freq = 486000 (486 MHz)
==============================
HTC Evo 3D CDMA
==============================
wake_min_freq = 384000 (384 MHz)
wake_max_freq = 1512000 (1.51 GHz)
sleep_min_freq = 192000 (192 MHz)
sleep_max_freq = 486000 (486 MHz)
==============================
HTC Amaze 4G
==============================
wake_min_freq =
wake_max_freq =
sleep_min_freq =
sleep_max_freq =
==============================
Asus Eee Pad Transformer TF101 / TF101G
==============================
wake_min_freq = 312000 (312 MHz)
wake_max_freq = 1232000 (1.23 GHz)
sleep_min_freq = 216000 (216 MHz)
sleep_max_freq = 456000 (456 MHz)
==============================
It's recommended to leave default values. Our tests proved, that above configuration is very good for both battery and performance.
You don't need to manually change O/C Daemon settings anymore!
Now my every ROM has Daemon Controller application that allows you to change O/C Daemon settings on the fly!
I do not recommend changing governors. Don't use SmartAss governor with new O/C Daemon. I recommend leaving default governors.
You can check frequencies statistics with this small app - CPUStats - simple CPU statistics
Remember that going above 1.5 GHz will not give you any noticeable performance improvement and can damage your device
Why it's not recommended to use SmartAss with new O/C Daemon? Because SmartAss has included profiles switching (sleep / awake) while new O/C Daemon is already doing the same - changing CPU min/max frequency when
device is going to sleep or when it's waking. So new O/C Daemon is in conflict with SmartAss gov but giving you similar effect, just much faster. More explained here
108Quick Settings XL 2.0 for ARHD 6.3.x
changed volume icon & order, and the text is now "Media Volume" instead of "Volume"
Quick Settings XL 2.0 for ARHD 6.3.x, no recent apps
Flashable zip: http://bit.ly/sFdkDG
Quick Settings XL for ARHD 6.3.x
