Before you try something new you can try flashing the Kernel again, sometimes it get stuck the first time but works the second.
[ROM] Android Revolution HD 93.0 | High Quality & Performance | 7.19.401.30 | 5.0.2
- Thread starter mike1986.
- Start date
Before you try something new you can try flashing the Kernel again, sometimes it get stuck the first time but works the second.
Read EX thread first page,the fix is already mentioned there.
I tried a second and third time, but when I installed TWRP 2.6.3.3 everything is ok
Android Revolution HD 83.1
--- release date: 5 December 2014 ---
Based on new 6.09.401.11 update
Included Wi-Fi Calling for U.S. T-Mobile (Thanks to xXDeathDealaXx)
Last edited:
I'm experiencing a problem on
latest version: I enabled wake by volume buttons but it doesn't work while sleeping. I am using xceed kernel though. May this be kernel related or does someone else experience it?
Sent from my HTC One using XDA Free mobile app
latest version: I enabled wake by volume buttons but it doesn't work while sleeping. I am using xceed kernel though. May this be kernel related or does someone else experience it?
Sent from my HTC One using XDA Free mobile app
Maybe i solved this. The option was ticked in Sense Toolbox, but I unticked and ticked it again (and rebooted). Now it ssems to work fine, but I'll keep an eye on that.
Trickster MOD always says busybox is not installed properly after flashing ROM (might be ksh link, but I'm not sure).
Volume2Wake mod requires working busybox, not only during functioning, but also on enable/disable. Mod should also be re-enabled after every ROM flash.
Volume2Wake mod requires working busybox, not only during functioning, but also on enable/disable. Mod should also be re-enabled after every ROM flash.
Last edited:
I had this question to the experts here. What does ' integrate dalvik into system' do ?? Is it any good ?
Sent from my HTC One using XDA Premium 4 mobile app
Sent from my HTC One using XDA Premium 4 mobile app
Still there is no solution for the new camera recorded correctly in 1080p?
I am also having the same camera program. It's the new eye experience camera that came out. I remember a user posted it in the apps thread and people were complaining then how it wasn't working. Maybe we go back to the last camera before the update http://forum.xda-developers.com/htc-one/themes-apps/htc-eye-experience-camera-t2937332
IPv6 APN setup
Would it be possible to add "ro.telephony.ipv6_capability= 1" to the build.prop so that IPv6 can be enabled on the cellular inerface?
Would it be possible to add "ro.telephony.ipv6_capability= 1" to the build.prop so that IPv6 can be enabled on the cellular inerface?
Difficulty installing firmware.
Hello, I have not had any difficulty in the past installing firmware. For whatever reason i am getting this message when i am trying to install 6.09.401.11
C:\adb>fastboot flash zip C:\adb\firmware.zip
sending 'zip' (19578 KB)... OKAY [ 3.448s]
writing 'zip'... INFOzip header checking...
INFOshift signature_size for header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 3.869s
any ideas?
IS vomer going to add this firmware to his downloads... i usually use his downloads, but for this one i downloaded from
main download page...?
Hello, I have not had any difficulty in the past installing firmware. For whatever reason i am getting this message when i am trying to install 6.09.401.11
C:\adb>fastboot flash zip C:\adb\firmware.zip
sending 'zip' (19578 KB)... OKAY [ 3.448s]
writing 'zip'... INFOzip header checking...
INFOshift signature_size for header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 3.869s
any ideas?
IS vomer going to add this firmware to his downloads... i usually use his downloads, but for this one i downloaded from
main download page...?
Last edited:
I was getting the same problem. At the end when I couldn't figure out I just went superCID and got it working.
http://forum.xda-developers.com/showthread.php?t=2317536
If u look up that error code you'll see its to do with incompatible model. But I have the m7ul and was doing the right one. Anyway it worked after going superCID. I'm on at&t if that helps.
sent by HTC One on my owners behalf.
AT&T here too... I thought there may have been more ppl with same problem...
I will give super cid a try sometime tomorrow....
Appreciate your response... thanks...............
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
2660
Proudly presenting you the most popular ROM for HTC One...
"My phone is now perfectly smooth, fast, stable. I do not expect much more from my phone!"
DarkAdrien
"This release is amazing! ROM feels super fast! Great job Mike & the team! (...) Never noticed any lag. 1 word: brilliant."
Selec1
"Feels a lot smoother in use - scrolling, swiping between sense screens. Much nicer feel. This is a real good one, Mike. Many thanks
"
dsm52
System details:
- Android 5.0.2 (Lollipop) - latest official HTC One 7.19.401.30 (WWE) firmware (92.x series) [No Sprint Support]
- Android 5.0.2 (Lollipop) - latest *STOCK* ROMs without modifications ---> click here
- This is improved version of stock ROM - no visual changes!
- Very fast, clean & stable!
- Full HTC Sense 6.0 Interface
- Multi-language (WWE)
- For HTC One M7
- Thanks to HTC for the base firmware
- Video Review by owenbeals
- Video Review by krazygreen
- Video Review by udimars30
Included kernel details:
- Stock kernel (the most stable)
ROM details:
- Removed software (CPU) rendering - full Snapdragon 600 (GPU) rendering
- Fully optimized and tweaked
- Root access
- Unsecured boot.img
- Newest BusyBox
- RAM optimizations
- System signatures check enabled for system security and safety
- Improved virtual memory management
- Speed optimizations
- Enabled GPU UI rendering
- Data, cache and system partitions mounting tweaks
- Bloatware applications removed
- All /system applications updated to latest available
- All /data applications updated to latest available
- Improved CPU governors performance
- Most optimal system scheduler
- Disabled kernel debugging for better performance
- Zipaligned (Improved RAM management)
- Zipalign on boot (for user applications on data partition)
- Fully de-odexed
- init.d scripts (BusyBox run-parts) support
- Auto init.d permissions set on boot
- sysro/sysrw commands support
- Excellent battery life!
- Improved EXT4 performance
- OpenVPN support
- Most up-to-date system files permissions
- Adobe Flash Player support
- Support almost 24h a day
- ...and many more!
You need:
- HTC One unlocked with htcdev.com (S-ON) or S-OFF
- Custom recovery
- Read this flashing guide - [GUIDE] Complete Flashing Guide | Rooting | Going Back To Stock
How to flash:
- Download ROM and place it on your virtual SD card
- Boot your phone in recovery mode (vol down + power)
- In main menu, select "install zip from sdcard"
- Select "choose zip from sdcard" and browse to the location of Android Revolution ROM
- You can use data wiping option in AROMA (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)
- After flashing process is complete, reboot the device
Android Revolution HD 93.0
--- release date: 9 November 2015 ---
- If your current firmware version doesn't match ROM firmware version, wiping data inside AROMA is highly recommended!- Based on the latest 4.16.401.13 update
- SuperSU updated to latest 2.52
- Updated Google apps
- Updated custom apps
- Updated HTC apps
- Sense Toolbox updated to latest 2.2.1
- Other minor changes and fixes
- Included and updated applications:
Important notes:
1. If you want to say "Thanks!"
There are many ways to show your support to the developer. You can:
- Press the "Thanks" button.
- Hit the donation button and "buy me a beer".
- Share your opinion about my work and write some feedback in respective thread.
- Advertise my work to your friends.
- Rate my thread with 5 stars.
2. Sharing policy
This forum is about sharing. If you want to use any part of my work, please feel free to do it but remember about some simple rules:
- Inform me about using my work by sending me a message. You don’t need my permission, just inform me.
- Include link to my thread from where you took particular files.
- Give proper credits for what you used.
- When it comes to using my ROM as a base you are free to do it only if I don't have "Stock ROMs" thread available for particular device. If such thread exists, you are
obligated to take ROMs from there instead. These threads with "Stock ROMs" are usually updated within 24 hours from the moment when I release my custom ROM.
Sharing is one thing, but please respect some areas of my work like:
- ROM name - "Android Revolution HD", "Android Revolution", "Revo HD", "AR HD" etc.
- Graphics used in my threads, especially head-banners designed exclusivity for me.
- Other parts of my work that are not supposed to be used by others without proper permission.
3. Support
If you have any issues or questions, please feel free to post them in the respective thread. Due to my commitments in real life I can't answer every PM, tweet or facebook post.
If you want to get the fastest and the best answer - ask the question in the thread. Every month I need to remove about 1.000 new messages from my XDA inbox. I’m sure it’s better if I spend this time cooking new ROMs.
4. Signature banners for users
Due to the increasing number of users flashing my ROMs we introduced some time ago 3 special groups of members.
- Android Revolution HD Recognized User – every user might get this rank with proper banner by being active in my thread (or threads).
Helping users to solve problems, answering questions or preparing threads with add-ons for Android Revolution HD are the most common ways to gain this rank. Just be active and we’ll contact you!
- Android Revolution HD Advanced User – every user might get this rank with proper banner by doing some amazing modification, application, theme etc. for Android Revolution HD.
Creating simple bootanimation might not be enough, but you never know! Having Recognized User status before is not needed!
- Android Revolution HD Supporter – every user who shared some server space with us (with proper bandwidth) will get this banner. Please keep in mind we can't use DropBox shared folders.
What we can use is minimum 20 GB of space and 10 Mbit upload speed. If you want to donate some server space to us, please contact me via private message.
Finally, thanks for using my work! I hope you will enjoy Android Revolution HD!
XDA:DevDB Information
[ROM] Android Revolution HD 93.0 | High Quality & Performance | 7.19.401.30 | 5.0.2, ROM for the HTC One (m7)
Contributors
mike1986., langer hans, Mikanoshi
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 2.6.3.3 recovery or newer
Version Information
Status: Stable
Created 2013-07-31
Last Updated 2016-02-10578Sense 5(.5) Toolbox
Sense 6 Toolbox
by Mikanoshi & me
Screenshots
Changelog, downloads, support and more info have been moved to our own thread.172
All mods listed in this post were reported working at the time they were added. I can't guarantee that future versions work though.
Flash all mods at your own risk! Be sure to make a nandroid backup before flashing or have the ROM at hand to re-flash it if anything goes wrong.
I'll update this post as often as I can and whenever time allows it.
If some links don't work or you found something which is worth being added, please send me a PM.
Keeping this up to date can be very time consuming job, every bit of help is really appreciated!
153THIS GUIDE HAS BEEN MOVED TO IT'S OWN THREAD
PLEASE VISIT: HERE FOR THE LATEST VERSION
------------
Successfully flashed new firmware!
Personally, I am on a Canadian HTC One - s-off'ed using revone & SuperCID
FAQ:
Q: Do I need S-OFF for firmware flashing?
A: YES!
Q: Do I NEED to update my firmware?
A: NO! But doing so ensures optimal phone performance.
Q: Does it matter when I flash the firmware (before or after new ROM install)
A: NO!
Q: Will updating the firmware erase my SD card or Apps?
A: NO! The firmware files provided in this guide take care of this for you so none of those get erased.
Q: If I only flash the ROM, will I get updated to the latest firmware?
A: NO!
PREPARING YOUR SYSTEM:
First we need to get you ADB and fastboot
Windows Users, download this file and extract the folder called "adb" to your C: drive. Your path should look like this:
Mac/Linux users install ADB & fastboot using:Code:C:\adb\
https://code.google.com/p/adb-fastboot-install/ (Download Mirror)
1. Extract the downloaded zip to your dektop
2. Open Terminal and type in:
3. Now typeCode:su cd Desktop/Android/ (note: Android is the directory extracted from zip file)
Note: By using the method above, your adb and fastboot files are stored at this location on your Mac: /usr/bin/Code:./ADB-Install-Mac.sh
=============
S-OFF & SuperCID
Instructions on getting S-OFF & SuperCID available HERE
=============
FIRMWARE FLASHING
Download 2.17.401.1 custom firmware without .dzdata files (this will prevent your phone/sdcard from being wiped): http://d-h.st/PJv
*LATEST* Download firmware 2.24.401.1 (SD card will not be wiped using this file): http://d-h.st/WO9 (Rename to firmware.zip after downloading)
-----
Windows users, you need to do these steps first:
- move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
- next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".
First, plug in phone to PC and type this in terminal/command prompt:
=============Code:adb reboot bootloader
Let's start by checking current system details. Type:
Now type:Code:$ fastboot getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 1.44.0000 [COLOR=Red][B]< This is your bootloader version[/B][/COLOR] (bootloader) version-baseband: 4A.16.3250.24 [COLOR=Red][B]< This is your radio version[/B][/COLOR] (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 1.29.666.17 [COLOR=Red][B]< This is your firmware version[/B][/COLOR] (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: <you don't need to know my serial#> (bootloader) imei: <you don't need to know my IMEI> (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0712000 (bootloader) cidnum: 11111111 [COLOR=Red][B]< This is your CID[/B][/COLOR] (bootloader) battery-status: good (bootloader) battery-voltage: 4077mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT
Once the phone has fully booted, go back to the bootloader mode:Code:fastboot reboot
After that, type:Code:adb reboot bootloader
Finally:Code:fastboot oem rebootRUU (FYI: I had to do this a couple of times for some reason - before the phone went into silver HTC logo mode)
Got this:Code:fastboot flash zip /Users/vomer/Desktop/firmware.zip Windows users: your command will look something like this: fastboot flash zip C:\adb\firmware.zip
Repeated same command:Code:sending 'zip' (71868 KB)... OKAY [ 4.936s] writing 'zip'... (bootloader) zip header checking... (bootloader) zip info parsing... (bootloader) checking model ID... (bootloader) checking custom ID... (bootloader) start image[hboot] unzipping for pre-update check... (bootloader) start image[hboot] flushing... (bootloader) [RUU]WP,hboot,0 (bootloader) [RUU]WP,hboot,99 (bootloader) [RUU]WP,hboot,100 (bootloader) ...... Successful FAILED (remote: 90 hboot pre-update! please flush image again immediately) finished. total time: 6.410s
Got this:Code:fastboot flash zip /Users/vomer/Desktop/firmware.zip
Note: On my phone's screen the green bar did not go to 100% of the bar ... but everything seemed ok so I moved on.Code:sending 'zip' (71868 KB)... OKAY [ 4.884s] writing 'zip'... (bootloader) zip header checking... (bootloader) zip info parsing... (bootloader) checking model ID... (bootloader) checking custom ID... (bootloader) start image[adsp] unzipping & flushing... (bootloader) [RUU]WP,adsp,0 (bootloader) [RUU]WP,adsp,100 (bootloader) ...... Successful (bootloader) start image[cir] unzipping & flushing... (bootloader) ...... Successful (bootloader) start image[rpm] unzipping & flushing... (bootloader) [RUU]WP,rpm,0 (bootloader) [RUU]WP,rpm,100 (bootloader) ...... Successful (bootloader) start image[sbl1-1] unzipping & flushing... (bootloader) signature checking... (bootloader) verified fail (bootloader) ..... Bypassed (bootloader) start image[sbl1-2] unzipping & flushing... (bootloader) signature checking... (bootloader) verified fail (bootloader) ..... Bypassed (bootloader) start image[sbl1-3] unzipping & flushing... (bootloader) signature checking... (bootloader) [RUU]WP,sbl1-3,0 (bootloader) [RUU]WP,sbl1-3,100 (bootloader) ...... Successful (bootloader) start image[sbl2] unzipping & flushing... (bootloader) [RUU]WP,sbl2,0 (bootloader) [RUU]WP,sbl2,100 (bootloader) ...... Successful (bootloader) start image[sbl3] unzipping & flushing... (bootloader) [RUU]WP,sbl3,0 (bootloader) [RUU]WP,sbl3,100 (bootloader) ...... Successful (bootloader) start image[tp] unzipping & flushing... (bootloader) ...... Successful (bootloader) start image[tz] unzipping & flushing... (bootloader) [RUU]WP,tz,0 (bootloader) [RUU]WP,tz,100 (bootloader) ...... Successful (bootloader) start image[radio] unzipping & flushing... (bootloader) [RUU]WP,radio,0 (bootloader) [RUU]WP,radio,26 (bootloader) [RUU]WP,radio,53 (bootloader) [RUU]WP,radio,79 (bootloader) [RUU]WP,radio,100 (bootloader) ...... Successful OKAY [ 39.601s] finished. total time: 44.485s
Last Step:
Then I went back to the bootloader mode (after the phone reboots successfully):Code:fastboot reboot
Checked if the update worked:Code:adb reboot bootloader
=============Code:fastboot getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 1.54.0000 [COLOR=Red][B]< Looks New![/B][/COLOR] (bootloader) version-baseband: 4A.17.3250.14 [COLOR=Red][B]< Looks New![/B][/COLOR] (bootloader) version-cpld: None (bootloader) version-microp: None (bootloader) version-main: 2.24.401.1 [COLOR=Red][B]< Looks New![/B][/COLOR] (bootloader) version-misc: PVT SHIP S-OFF (bootloader) serialno: you don't need to know my serial# (bootloader) imei: you don't need to know my IMEI# (bootloader) meid: 00000000000000 (bootloader) product: m7_ul (bootloader) platform: HBOOT-8064 (bootloader) modelid: PN0712000 (bootloader) cidnum: 11111111 [COLOR=Red][B]< Oh Look! I'm Superman :) [/B][/COLOR] (bootloader) battery-status: good (bootloader) battery-voltage: 4331mV (bootloader) partition-layout: Generic (bootloader) security: off (bootloader) build-mode: SHIP (bootloader) boot-mode: FASTBOOT (bootloader) commitno-bootloader: dirty-d16dc66985 (bootloader) hbootpreupdate: 11 (bootloader) gencheckpt: 0 all: Done! finished. total time: 0.061s
RECOVERY IMG
=============
Get latest TWRP (download here)
With your phone plugged into your PC, type in:
Once in bootloader mode, type:Code:adb reboot bootloader
Then:Code:Mac/Linux: fastboot flash recovery /Users/vomer/Desktop/openrecovery-twrp-2.6.0.1-m7.img Windows: fastboot flash recovery C:\adb\openrecovery-twrp-2.6.0.1-m7.img
Hope this post helps someone else :good:Code:fastboot reboot131
--- User banners prepared by matanlevanon, atticus182, KID_1194, adsamcik, sigeltek, jotha, Super-Veloce & D3VICE ---
A more specific FAQ section for the One (For general FAQ scroll down a bit)
1. When I try to enter recovery it just blinks for a second and the phone reboots. How do I get into recovery?
Use Vol-Down + Power to enter fastboot mode. Now connect the phone to the PC and use 'fastboot erase cache'. After that it should be able to boot recovery correctly.2. The phone rebooted itself while installing the ROM, now it just bootloops. How should I recover my phone?
Reboot into recovery and flash again. If recovery won't load, check FAQ 1.3. Do I need to wipe my data everytime I flash a new version?
No, a data wipe is only needed when you come from stock or another custom ROM. It is also recommended but not manadtory to wipe when there is a base update. A wipe is needed if you want to go to GE ROM4. Do I need to flash boot.img seperately?
No, the installer will flash it for you.5. Can I flash this ROM on my T-Mobile / AT&T / Rogers... variant?
Yes, you can. The ROM will work on all the variants6. And where do I get the old versions?except Sprint, as it has some significant differences.Sprint is supported only with version 31.6 as of now. WiFi calling is available in version 31.6.
7. I am on AT&T and my signal is much lower than on stock ROM. How do I fix this?
In fact your signal is not lower. The lower singnal bar display is a cosmetic issue. To check your actual signal strength go to Settings->Info->Network and look for the dbm value. When you compare this you will notice your signal strengh is okay.8. I forgot to select an option in AROMA / I don't want a mod anymore. How can I add/remove it afterwards?
Reflash the ROM with the desired options. No wipe required.9. How do I get rid of the 3-dot-menu?
As of the 4.2.2 update HTC introduced the Long-press-home-as-menu functionality, which also removes the black menu bar. Activate it under Settings -> Display -> Home Button.10. Volume-wakeup mod doesn't work sometimes, is there a fix?
Some variations of the VolWake mod won't work in deep sleep mode. You need to use another variant, like inside a custom kernel.11. Speaking of kernels, which one do you recommend?
This is mainly a matter of personal taste. I use the stock kernel included in AR HD. It is stable and works nicely. You are free to try other kernels, but make sure you report kernel issues on the kernel's thread.12. When will you upload version x.y?
Please, don't ask for ETAs. It will be uploaded, when it's done13. Can you include the super awesome mod xyz? Sometimes, Mike likes to take a nap!
This ROM is meant to be an optimized stock ROM with some important mods in AROMA (APM, %battery etc). Please note that adding more mods also adds possibility for bugs, and increases the size of the ROM.zip14. Do I need to update my radio/firmware to flash the ROM?
It is not needed. You can do it if you want to. Newer radios/firmwares can improve signal, bluetooth, WiFi... refer to the following thread for more information: http://forum.xda-developers.com/showthread.php?t=218282315. Does the ROM include radio/firmware/hboot...?
Nope.16. But I really, really want to install firmware! How to do it?
Check the awesome work by vomer and makbil here: http://forum.xda-developers.com/showpost.php?p=42556698&postcount=24958 and here: http://forum.xda-developers.com/showpost.php?p=42586614&postcount=25330 . Please remember, that this is NOT the firmware thread. You better ask questions related to it in the corresponding thread.17. My Facebook app lags. How to make it smooth again?
Enable Force GPU rendering in Settings -> Devoloper Options -> Advanced18. Before I flashed the ROM my phone's speakers were louder. How can I fix it?
This change was made by HTC. It has nothing to do with AR HD. It may change in the future again.19. How can I remove Kids menu?
Install either APM mod or use the xposed framework and MoDaCo Toolkit. It has a mod in it for removing the Kids menu from APM. Xposed is available in AROMA, MoDaCo Toolkit is a seperate download. For removing the actual app, you can use TitaniumBackup and use it's function to remove system apps.20. My WiFi passwords aren't stored anymore. How can I fix this?
You have probably selected the AT&T option in AROMA. For a quick fix reflash the ROM, select international version (no wipe needed, please see FAQ 7 for a note about signal bars when using the international version on AT&T)21. How do I remove the power saver notification?
You can use xposed+MoDaCo toolkit or the following App for that: https://play.google.com/store/apps/details?id=com.jmzsoft.powersaverdisable22. How can I get larger MMS sizes without doing a full wipe?
Please check the guide here: http://forum.xda-developers.com/showpost.php?p=42471350&postcount=2413723. How can I change the order of EQS?
Please check the guide here: http://forum.xda-developers.com/showpost.php?p=42609830&postcount=2549624. I have an error about UID. How can I fix it??
Please look in the folder /data/data/. If you have something from Quadrant there delete it. If that didn't help checl /data/system/uiderrors.txt. You may need to delete the quadrant folder from recovery.25. My issue is not mentioned here and/or my phone is still not working after trying to recover. What should I do?
You are always free to post in this thread or join IRC. You will find helpful members who will support you in solving your problem.
General FAQ
Q 2: My Premium Navigation doesn't work correctly. What should I do?
A: Your Premium Navigation may not work correctly for many reasons. Most of them are not ROM related. You can try the following things:
- reinstall your Locations under "Settings" ---> "Locations"
- remove /sdcard/.data/navigator/Data/Temporary from your SD card
- re-download Google Maps from the Android Market
- clear data from Google Maps in system software management
Q 4: After I reboot my device, mp3 ring-tone is back to default. What should I do?
A: Go to Ringtones > Menu > More Ringtones > Create new ringtone > Select the one you want (Thanks to kill4l)
Q 6: After flashing Android Revolution HD my SD card is being mounted as ready only. What should I do?
A: Connect your SD card to your PC and do defragmentation process. If you still have some problems with SD card, please read this.
Mac users can use the repair function of the MacOS disk utility to solve the read only problem (Thanks to Calimero1205).
Q 8: Do I need to wipe data partition when upgrading from old version of Android Revolution HD?
A: I always recommend wiping data partition but it's absolutely necessary only if I mention that in the changelog. But normally you can live without it.
Wipe data partition if you experience any issues.
Q 10: I had SetCPU installed on Android Revolution HD, then I flashed new version of AR HD and SetCPU doesn't work any more. How to fix it?
A: Please reinstall SetCPU.
Q 12: My phone got random freezes or reboots. How can I fix it?
A: Every CPU is different. It seems that your CPU doesn't like OC or UV (undervolt). Set your CPU to default 1GHz.
If it doesn't help, then you need to flash default kernel from the second post.
Q 14: My GPS signal is very weak or GPS is not working at all. How can I fix it?
A: There are some solutions:
1. You can download and install FasterFix to improve your signal strength.
2. You can download and install GPS Status & Toolbox to manage your GPS settings.
3. Turn off "Fast boot" under "Settings" ---> "Power" and reboot your phone.
4. Read this, this, this & this
5. [Trick] Speed Up Satelite Fix for GPS on Android
Q 16: My Quadrant score is not as high as on different ROM. What does it mean?
A: It means absolutely nothing. Benchmarks on Android System are more or less lottery and they are not showing the real system performance.
There are many settings that can force Quadrant to show more then 3000 points but it's faked performance, that actually can slow down your phone in some circumstances.
What I always emphasize is a real performance, the one you can feel under your fingers. Remember that I/O has some limit and surpassing it shows just a numbers without true ratio.
Also keep in mind that Quadrant has support for Android Gingerbread only in version 1.1.7 and higher.
Q 18: My screen-lock sound and keypad sound while dialing numbers is very low. How can I fix it?
A: Download "Quick Settings" application from Android Market and check system volume slider.
Q 20: My Wi-Fi doesn't reconnect automatically after boot. How to fix it?
A: Disable fastboot in settings or check this solution.
You think you're addicted from flashing ROMs, checking forum the whole day and you feel like "Android" should be your second name? Well, here's something for fun
preacher65 said:Whiskey103 said:
DarkAdrien said:My wife is pregnant for 4 months, ETA October 22nd (her upload speed is not so good). If only I could do a nandroid backup of my current life to be able to restore it after
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone