[ROM][AOKP 7.1/Nougat][HLTE]OFFICIAL AOKP for Galaxy Note 3 (Unified) Nightlies

[shane87]

[ROM][AOKP 7.1/Nougat][HLTE]OFFICIAL AOKP for Galaxy Note 3 (Unified) Nightlies

*** Disclaimer***
Your warranty is now void!
I am not responsible for damages caused by this ROM
YOU are choosing to install it!
If you have any concerns about potential issues or features with this ROM, do your research!
If you accuse me of causing problems with your device, you WILL be ridiculed!

Introduction
AOKP is a ROM developed by TeamKang, based on AOSP with magical unicorn bytes (awesome features) baked right in!
These builds have only been tested on SM-N9005! @Buslova confirmed working on SM-N900P for Sprint


Features

• Full OMS/Substratum support - Theming built right in
• ROM Control app - A central place to manage all almost all the cool features Magical Unicorn Bytes!
• Gesture Anywhere/App Circle Bar/App Sidebar - Use gestures/side bars to launch frequently used apps/activities
• PIE - Quickly access common actions by swiping up above home key
• LED Control - Control color and pattern for notification LED
• Tons of other tuneables - So many aspects can be changed, from the LockScreen to the hardware button mapping, and much more!

Installation instructions

• Backup your data! (nandroid, TiBu, etc.)
• Wipe Data/Factory Reset (You did backup, right?)
• Flash ROM
• Flash GAPPS (OpenGapps or similar; ARM platform; Android 7.1)
• Wipe Cache/Dalvik Cache
• Reboot

Download

Official AOKP Download Page:
AOKP for Samsung Galaxy Note 3 (hlte)

Source:
AOKP Source

Changelog

Changelog is available at the download link above

Thanks To/Credits
*TeamKang
*tdm
*LineageOS

PayPal Donations and thanks are always appreciated!

XDA:DevDB Information
Android Open Kang Project for Samsung Galaxy Note 3 (HLTE), ROM for the Sprint Samsung Galaxy Note 3

Contributors
shane87
Source Code: [url]http://aokp.co/source[/URL]

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest TWRP or CWM Recovery
Based On: AOKP

Version Information
Status: Nightly

Created 2017-11-29
Last Updated 2017-11-28

 

[shane87]

Reserved

 

[Buslova]

Hey y'all....guess what?!?!?!? This ROM works perfectly on my Sprint sm-n900p Note 3!!! No extra flashing or APN setup necessary!!! I only flashed the ROM then GAPPS (I used open gapps nano fyi) and then supersu.zip. I had LTE, SMS, and MMS service IMMEDIATELY after the boot animation (slightly long on first boot of course since it's setting things up but faster restarts later) was done. As soon as the home screen/google account login screen appeared, I already had full LTE service. No extra APN fiddling needed. It's a true nougat based AOKP build and we have an official builder here. This is awesome news y'all! Show this dude some thanx!

 

[shane87]

Just an FYI, no need to flash SuperSU.zip. AOKP has su baked in already, unlike lineage. Of course, you can flash SuperSU if you want, I'm just letting y'all know it's not necessary for su.

 

[Buslova]

Just an FYI, no need to flash SuperSU.zip. AOKP has su baked in already, unlike lineage. Of course, you can flash SuperSU if you want, I'm just letting y'all know it's not necessary for su.

thanks man, i was just sharing what i did which of course is kinda my norm 1st attempt flash of a new rom i guess. good to know it's baked in as well.

 

[shane87]

thanks man, i was just sharing what i did which of course is kinda my norm 1st attempt flash of a new rom i guess. good to know it's baked in as well.

Yeah, baked in su is one of the reasons I wanted to get AOKP working on hlte. You can bake su into unofficial lineage builds, but you have to set an environment var, and I always forget. AOKP always bakes su in.

 

[kkslider1]

Is it possible to replace SuperSU with Magisk? Can't imagine rolling back to the former, given all the perks of the latter. @shane87 Oh, and does the ROM support F2FS?

 

[shane87]

@kkslider1 this rom doesn't use SuperSU. It has the su binary included in /system and uses Privacy Guard to manage su requests. As far as magisk goes, I don't know if magisk works with su being included in /system. To the best of my knowledge, magisk is a systemless root, with the boot image patched to include su in the ramdisk. As far as it working on a pre-approved image, I'm just not sure.

As far as f2fs, the support is built into the kernel. Beyond that, I'm not positive.

 

[kkslider1]

@kkslider1 this rom doesn't use SuperSU. It has the su binary included in /system and uses Privacy Guard to manage su requests. As far as magisk goes, I don't know if magisk works with su being included in /system. To the best of my knowledge, magisk is a systemless root, with the boot image patched to include su in the ramdisk. As far as it working on a pre-approved image, I'm just not sure.

As far as f2fs, the support is built into the kernel. Beyond that, I'm not positive.

Thanks @shane87 , you are a hero among the N900P community, as we have been stuck on Marshmallow for over 9 months. Would you be willing to reach out to @trader418 and @haggertk to help them implement N900P cellular data support for LineageOS?

 

[haggertk]

Thanks @shane87 , you are a hero among the N900P community, as we have been stuck on Marshmallow for over 9 months. Would you be willing to reach out to @trader418 and @haggertk to help them implement N900P cellular data support for LineageOS?

Umm, I'm pretty sure that N900P cell data works just fine. @javelinanddart has one in his hand, is a maintainer, is on a Sprint prepaid mvno, and has full cellular connectivity.

Sent from my SM-G900F using Tapatalk

 

[shane87]

@kkslider1 cellular data support for N900P, like @haggertk already mentioned, should be working just fine on lineage. To bring AOKP to N9005/N900P, I literally just had TeamKang fork the cm-14.1 branch of hlte, and changed all lineage references to AOKP, and fixed the dependencies files. I've made no changes to cellular data settings at all

 

[shane87]

Update
So I have been trying to bring more s-pen support to AOKP Nougat. The s-pen currently works as a stylus, but there is no support for using the stylus to input gestures like you can on stock. Lineage recently merged a few commits to implement stylus gestures into their trees, and I have been trying to cherry-pick those over to AOKP. I've got the changes to CMParts pulled in and merged, and everything still builds. But when I merge the code to actually make the gestures work, it breaks hlte builds. On doing some digging, it appears our framework is missing some commits that lineage has merged. And I'm talking a large number of commits, going back a couple of years. With everyone working on Oreo bring up, I'm just not sure if we can get it straightened out for Nougat. On the plus side, the commits are there for Oreo, so adding stylus gestures for Oreo should be a cinch, once we get Oreo going that is. Again, NO ETAs!!!

 

[loudawg11]

Thank you the Rom. I would like to give you a paypal thank you. Is there a link.\?

 

[shane87]

Thank you the Rom. I would like to give you a paypal thank you. Is there a link.\?

PayPal donation link added to OP

 

[vipergtsam]

I flashed this rom to my sprint note 3 on boost mobile had to flash a apn to get data working but was wondering how do u change sound from audio fx to viper4android it worked but now it doesn't work and I haven't found any sound settings for that

 

[shane87]

I flashed this rom to my sprint note 3 on boost mobile had to flash a apn to get data working but was wondering how do u change sound from audio fx to viper4android it worked but now it doesn't work and I haven't found any sound settings for that

That is something you would have to ask the devs over at viper4android. That is a 3rd party add-on, and we cannot guarantee support for it. I've personally never messed with viper4android.

 

[vipergtsam]

That is something you would have to ask the devs over at viper4android. That is a 3rd party add-on, and we cannot guarantee support for it. I've personally never messed with viper4android.

Well audio fx doesn't work for me it doesn't boost anything

 

[vipergtsam]

That is something you would have to ask the devs over at viper4android. That is a 3rd party add-on, and we cannot guarantee support for it. I've personally never messed with viper4android.

Thanks I fixed the issue have viper4android running

 

[shane87]

Thanks I fixed the issue have viper4android running

Good to hear :good:

 

[schneidz]

nice work, +1.
i am having trouble with the back and option buttons not lighting up. i go to settings -> aokp -> hardware buttons and the default is 5 seconds illumination. and they light up when i am in that menu. but when i go to the homescreen they shutoff and never light up again.