[ROM] AOSP 10 [Gcam] [Open Devices]

Search This thread

Sjll

Recognized Developer
Jun 4, 2017
527
663
Chongqing
AOSP 10.0 for Xperia 10 II
Based on Sony Open devices project

Code:
/*
*Disclaimer
*
* Your warranty may be void.
*
* We're not responsible for bricked devices, dead OTGs or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/

Unlock bootloader is necessary!

Download Link
: Androidfilehost

How to flash:
1. Unzip the ROM. install fastboot driver on your computer.
Then Download latest platform-tools from Google! Link
2. Phone enters fastboot mode. Then run:
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img

4. Download OEM image from Sony dev world
For AOSP 10 you need to download: Software binaries for AOSP Android 10.0 – Kernel 4.14 – Seine (latest)

5. Unzip OEM image then run:
Code:
fastboot flash oem_a <Your-Path-of-OEM-Image.img-Edit this>
fastboot flash oem_b <Your-Path-of-OEM-Image.img-Edit this>

6. Hold power key + volume down, you will boot into recovery. Choose Wipe data/factory reset to reset your phone.
7. Choose enter fastboot, you need to install fastbootd Drivers, follow this please Link
Then run :
Code:
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img

8. Reboot and Enjoy

Gcam You could use this one.

Recovery for flashing Gapps: Link

TWRP A broken one: twrp-20201115-SODP.zip
Kernel source : sonyxperiadev
Other source : sonyxperiadev
 

Attachments

  • Gcam-Xperia10mk2-Sjll-config.xml
    23.1 KB · Views: 106
Last edited:
  • Love
Reactions: Meloferz

Sjll

Recognized Developer
Jun 4, 2017
527
663
Chongqing
Bug:
Front cam

Ugly Search box?
Disable search app, it will disappear.
 
Last edited:

Sjll

Recognized Developer
Jun 4, 2017
527
663
Chongqing
Thanks for manual.
I get to point number 7, but then writes it to me
"Sending sparse 'system' 1/2 (785636 KB) OKAY [19.208s]
Writing 'system' FAILED (remote: 'No such partition.')
fastboot: error: Command failed"
Where is mistake? :)

Read guidance carefully please:

6. Hold power key + volume down, you will boot into recovery. Choose Wipe data/factory reset to reset your phone.
7. Choose enter fastboot, then run :
 

bamdadkhan

Senior Member
Oct 7, 2013
95
10
woooow finally : ) you are like a god. i was about to sell my phone, it's been collecting dust since i bought it.
 

Attachments

  • aaMVIMG_20201117_144909.jpg
    aaMVIMG_20201117_144909.jpg
    231.1 KB · Views: 98
  • aaMVIMG_20201117_145039.jpg
    aaMVIMG_20201117_145039.jpg
    266.9 KB · Views: 100

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    AOSP 10.0 for Xperia 10 II
    Based on Sony Open devices project

    Code:
    /*
    *Disclaimer
    *
    * Your warranty may be void.
    *
    * We're not responsible for bricked devices, dead OTGs or you getting fired because the alarm app failed.
    * Please do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    */

    Unlock bootloader is necessary!

    Download Link
    : Androidfilehost

    How to flash:
    1. Unzip the ROM. install fastboot driver on your computer.
    Then Download latest platform-tools from Google! Link
    2. Phone enters fastboot mode. Then run:
    Code:
    fastboot flash boot boot.img
    fastboot flash dtbo dtbo.img
    fastboot flash recovery recovery.img
    fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
    fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img

    4. Download OEM image from Sony dev world
    For AOSP 10 you need to download: Software binaries for AOSP Android 10.0 – Kernel 4.14 – Seine (latest)

    5. Unzip OEM image then run:
    Code:
    fastboot flash oem_a <Your-Path-of-OEM-Image.img-Edit this>
    fastboot flash oem_b <Your-Path-of-OEM-Image.img-Edit this>

    6. Hold power key + volume down, you will boot into recovery. Choose Wipe data/factory reset to reset your phone.
    7. Choose enter fastboot, you need to install fastbootd Drivers, follow this please Link
    Then run :
    Code:
    fastboot flash system system.img
    fastboot flash vendor vendor.img
    fastboot flash product product.img

    8. Reboot and Enjoy

    Gcam You could use this one.

    Recovery for flashing Gapps: Link

    TWRP A broken one: twrp-20201115-SODP.zip
    Kernel source : sonyxperiadev
    Other source : sonyxperiadev
    1
    Hi,
    can you also provide a rom without gapps?

    Regards