Dirty flashed the 2023-03-26 build. Nice boot time! Battery consumption was increased on the previous build. I will observe if it runs better again now.
The wrong OS (CherishOS) is displayed under #1 Installation/Dirty Flash.
Hello, can I just install the latest update without changing TWRP (stay on Nanhuemly) & without changing ext4 or f2fs?
Or I have to change it?
Or I have to change it?
You don't need to change twrp if you stay on same partition scheme... but anyway... Why don't change? It takes 2 seconds and you can always go back to previous TWRP if you prefer...
f2fs is optional.... it seems to be faster.... and if you want to go unencrypted you can avoid flashing DFE... but you always can use the ROM as before... as is... with ext4 partition, with or without DFE.
f2fs is optional.... it seems to be faster.... and if you want to go unencrypted you can avoid flashing DFE... but you always can use the ROM as before... as is... with ext4 partition, with or without DFE.
Since the last two releases the battery usage in idle is to high and the battery capacity isn't available any more. Mobile network uses more battery than Phone idle. What is the reason?
It was the same with me. I was wondering if it wasn't the fault of a dead battery, so I installed the last official rom. it turned out that everything works great and I get 3.5-4 hours on screen. from what I remember on crDroid Android 11 I had similar results. And on Android 12 and 13 (LineageOS, crDroid, EvolutionX) only 2.5h on screen. Big difference
.
Which ROM do you mean?
The battery drain is only when the device is not in airplane mode, e.g. overnight.
It began after dirty flashing the 2023-03-07 build.
I mean stock rom. On stock rom i have 3,5-4h on screen. On any custom rom above android 11 2,5h on screen. I'ts huge difference.
After updating to your recommended TWRP, I clean flashed 2023-04-26 and a couple of days later I dirty flashed 2023-05-07 build. The ROM runs smoothly, but the idle battery consumption is still quite high. And the usefull setting to set a charge limit has been removed.
What is the unlock data password for this recovery? Why do I get an error when I enter the correct password for the boot screen?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
15
Installation* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
EvolutionX for Mi Mix 2 [chiron]
* Evolution X allows users to experience Google's latest Pixel updates while integrating useful features from known custom ROMs.
Based on Android 13
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
NFC
Lights
Sound/vibration
Known issues
Encryption on f2fs doesn't work
Choose your flavor
1. You can choose between the traditional EXT4 or the new EROFS. This fs affect only to /system and /vendor partitions
2. Magisk doesn't work on EROFS at the moment. Anyway I've included KernelSU on kernel, so you can install if you want KernelSU app in order to get root and flash magisk modules
3. Once selected root partitions fs, you can choose fs for /data and /cache partitions between traditional EXT4 or F2FS
4. Note that EXT4 comes with encryption by default and F2FS comes unencrypted
Decide if you want encryption or not
1. If you want encryption, use EXT4 on /data partition
2. If you prefer to go unencrypted, then use F2FS on /data partition
First Time Install / Clean Flash
1. Due to latest changes, is mandatory to use my last TWRP posted below
2. Reboot into recovery mode
3. Go to Wipe --> Advanced Wipe --> Select Data/Cache --> Swipe to Wipe --> Reboot into recovery
4. If you already have /data on f2fs (or ext4 unencrypted) and want stay that way, skip step 5
5. Go to Wipe --> Format Data (internal storage will be wiped too, backup your data) --> Type yes and accept -->
Reboot into recovery
6. Download the ROM and copy it into internal storage
7. Flash the ROM (and magisk if you consider it, but ONLY on EXT4 version, over EROFS will bootloop)
8. Reboot to system
Dirty Flash over previous Evolution X v7.8
NOTE: Do not dirty flash over old versions earlier than v7.8. In that case do a clean flash
1. Due to latest changes, is mandatory to use my last TWRP posted below
2. Reboot into recovery mode
3. Download the ROM and copy it into internal storage. You must use the same version alteady installed (EROFS or EXT4)
4. Flash the ROM (and magisk if is already installed, but ONLY on EXT4 version, over EROFS will bootloop)
5. Reboot to system
Change /cache and /data filesystem from ext4 to f2fs
1. You must format /data partition, so all your data and internal storage will be deleted. Please backup your files
2. Reboot into recovery mode
3. If already encrypted: Go to Wipe --> Advanced Wipe --> Select Cache and Data --> Swipe to Wipe --> Reboot into recovery
4. Go to Wipe --> Format Data --> Type yes and accept --> Reboot into recovery
5. Go to Wipe --> Advanced Wipe --> Select Data --> Repair or Change File System --> Change File System --> F2FS --> Swipe to Change
6. Repeat step 5 but selecting Cache
Change /cache and /data filesystem from f2fs back to ext4
1. You must format /data partition, so all your data and internal storage will be deleted. Please backup your files
2. Reboot into recovery mode
3. Go to Wipe --> Format Data --> Type yes and accept --> Reboot into recovery
5. Go to Wipe --> Advanced Wipe --> Select Cache --> Repair or Change File System --> Change File System --> EXT4 --> Swipe to Change
Hybrid Mode
You can have /cache and /ext4 on different filesystems, so follow previous instructions to put the partitions on your desired filesystem
Download EXT4 version
googledrive / mediafire
MD5: 0b60ab8b443b3c71c341b09bc921bbec
SHA1: f86bcb67e42cdeb89ff30c586c43dd88a7f35669
Download EROFS version
googledrive / mediafire
MD5: b194ede1855579f244eef66854f0aa8d
SHA1: 079a1561c5f4d17500ca20f992a5bdad2ef448a3
Download latest TWRP
googledrive / mediafire
MD5: 5c4845b2f5378abba303688aca000c46
SHA1: a2d71742f2928817fc3426ecba843c50f3cc4291
- Android OS version: 13.0.0_r43
- Build ID: TQ2A.230505.002
- Security patch level: May 05 2023
- Build author/Device Maintainer: Huexxx
- Source code: EvolutionX GitHub repos
- Trees and Kernel: Huexxx GitHub repos
- Status: Stable
- SELinux Status: Enforcing
- Release date: 2023-05-07
8Features / Changelog 2023-05-07
- kernel:
-- Switch to EROFS legacy version (less changes to base 4.4 kernel avoiding possible problems)
-- Switch to Simple Low Memory Killer
-- Add SchedTune and CpuSets Assist
-- Several EAS tweaks
-- Several sched/mm/cpufreq commits
- Source updated (upgraded to android 13.0.0_r43)
Features / Changelog 2023-04-26
- kernel:
-- Backported support for EROFS fs
-- Backported support for Cgroup v2 Freezer
-- Switched to 2SI (two stage init)
-- Added KernelSU support
- Source updated (upgraded to android 13.0.0_r41)
Features / Changelog 2023-03-26
- kernel:
-- Reverted some not wanted commits
-- Some logspam removed
-- Boot time has been reduced by 26 seconds
Features / Changelog 2023-03-07
- Source updates (upgraded to android 13.0.0_r30)
- Kernel: Added several commits regarding EAS and cpufreq
- Trees: Added quota flag to data mount (needed TWRP 3.7.0 with quota support)
- Sepolicy: Address some denials
- Dropped Go version
Features / Changelog 2023-01-28
- Source updates
- New Go version! (with Go Gapps)
Features / Changelog 2023-01-21
- Source updates
- Launcher3:
-- Import widget overlap from Lawnchair
- Kernel updates
- Dropped Flipendo, Turbo and Turboadapter
- Some commits on qcom-caf display hal
Features / Changelog 2023-01-09
- Sources updates
- Switch to OSS libnotifyhal (make proximity sensor work without binder, new lineageos approach)
- Drop vndk-ext packages
- Switch BTAudio to AIDL
- Switch to common fingerprint HIDL
- Config SQLite to operate in MEMORY mode
Features / Changelog 2022-12-28
- Sources updates
-- Switch to EvoX modded Launcher3
- kernel:
-- Some QCom commits
- Downgraded audio and listen blobs to older revision
- Drop Soundtrigger, Renderscript and qti perf stack
- Updated sepolicies
- Misc tweaks
Features / Changelog 2022-12-01
- Fixed problem on latest release (EvoX sources related)
- Update GPS hal and blobs from LA.UM.9.6.3.r1-06200-89xx.0
Features / Changelog 2022-11-29
- Source updates
- kernel:
-- Switch to LLVM tools for compiling
-- Xiaomi updates
-- Backport binder from 5.4-lts
-- Lots of commits/patches
- Updated audio, listen, thermal-engine, display and DRM blobs
- OpenGL ES driver updated to OpenGL ES 3.2 V@0502.0
- Updated Display HAL to LA.UM.10.6.2.r1-01900-89xx.0
- Fixed soundtrigger (Ok Google)
- Reenabled thermal-engine
- Lots of thing that I forget now...
Features / Changelog 2022-11-10
- Source updates
- Fixed Night Light
- Fixed LiveDisplay
Features / Changelog 2022-11-08
- Source updates
-- Upgrade to release 13
-- November security patch
-- Readded FaceUnlock
- Screen recorder
-- Limit to 60fps
-- Use AVC 3.2 for performance
Features / Changelog 2022-11-03
- Source updates
- Vendor tree updates
-- Blob cleanup
-- Update ANT+, Bluetooth and PowerOffAlarm blobs
- Avoid dexpreopting prebuilts to save space
- Add more gapps now that system image is smaller
- Add support for Smart Charging
- Replace Pixel Launcher with mod (allow more desktop grids)
- Replace GrapheneOS Camera with latest one from GrapheneOS repos
- Improve selinux policies
Features / Changelog 2022-10-16
- Source updates
Features / Changelog 2022-10-11
- SoftAP:
-- Add list to select Country Code spoof
-- Reenabled ACS
-- Fixed problems disabling hotspot
-- Extend funcionality to QS button
- Fixed DocumentsUI
- Some selinux denials addressed
Features / Changelog 2022-10-08
- SoftAP: Add AP band preference
- Fixed security settings page
- Selinux Enforcing
Features / Changelog 2022-10-06
- Fixed 5GHz hotspot
-- Spoof country code to use US (best option)
-- ACS disabled (it avoids 5GHz bands sometimes)
- Debloated a bit, so many gapps by default
- Added Graphene Camera v16
- Added GoogleCamera to MGC-8.4.300_Parrot043_V1.5
- Selinux permissive atm5
