[ROM][AROMA][4.2.x]PRiMONeX™ V3.0 for Walton Primo G1[STABLE][01/12/2013]

Search This thread

musfiqus

Senior Member
Apr 9, 2013
121
315
Dhaka
PRiMONeX™ ROM for Walton Primo G1

Fully stable Jellybean 4.2.X ROM for Walton Primo G1


primonex_banner_v3.png


Code:
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 */


Features:

1. Fully working 4.2.X ROM with all the 4.2 core features.
2. Loads of mods to customize
3. Deodexed, Pre-Rooted with busybox
4. init.d scripts for better ram management and battery life.
5. Bloatware free
6. Xposed framework integrated
7. Gravitybox pre-installed
8. Xtheme Engine integrated.
9. Full Vanilla+ experience.
10. Nexus boot logo and animation.
11. VIPER4ANDROID Integrated:
12. Xperia Z small apps Integrated:
13. Kitkat UI Included:
14. Sense 4 3D recent task switcher added
15. Turbo music player added
16. Long term support :cool:


SMART EDITION EXTRA FEATURES:

1. Smart Gestures
2, Dual Sim 3G
3. Dual Sim ringtone
4. Dual dial button enabled dialer.


Downloads:

http://www.mediafire.com/download/shlah1h6rahq162/PRiMONeX_V3_SMART_EDITION.zip (444 MB)

Credits:

@SuperDroid-BOND

Special Thanks to: mehedy, R Robin Rayhan, Mosabbir Ahmed Khan, S.m. Tahmid, Tushar, Hossain Evan

For Installation procedure please check the #2nd post.


Walton Primo G1 official Facebook Group
 
Last edited:

musfiqus

Senior Member
Apr 9, 2013
121
315
Dhaka
Download links and instructions

Prerequisites:

1. Walton Primo G1.
2. You MUST be running Jellybean official/custom ROM before installing this ROM. If you flash this ROM on ICS it will NOT work.
3. Custom recovery like CWM/TWRP (I prefer TWRP)
4. And of course a fully functional brain in your head :cyclops:


Installation:


1. Download the zip file named "PRiMONeX_V3______EDITION.zip"
2. Now put that zip file in SDCARD and reboot to your favorite recovery (CWM/TWRP)
3. Wipe /cache, /data, /system, dalvik cache, /.Android_Secure
4. Now install the zip and reboot after flashing.
5. Enjoy the shiny new 4.2.X :D
 
Last edited:

musfiqus

Senior Member
Apr 9, 2013
121
315
Dhaka
Changelog and screenshots

Change-log:

Version 3.0: 1. Added smart gestures
2. Dual Sim 3G
3. Dual Sim Ringtone
4. Dual button dialer
5. Kit Kat launcher
6. Kit Kat apps
7. Kit Kat MOD
8. Xperia Z small apps mod
10. Sense 3D recent apps menu


Version 2.0: 1. New base rom
2. Reduced lag
3. Fixed WIFI and usb storage
4. Fixed autofocus


SCREENSHOTS:


pn3_7.png

pn3_8.png

pn3_2.png

pn3_3.png

pn3_10.png

pn3_1.png

pn3_5.png

pn3_11.png

 
Last edited:

musfiqus

Senior Member
Apr 9, 2013
121
315
Dhaka
Reserved

How to get other Google apps?
Ans: You need to flash the gapps package after flashing the rom. You don't have to wipe anything during the gapps flashing. You can get the gapps package from here. http://d-h.st/nCG
Can I install more xposed modules?
Ans: Yes, of course. But before that, you have to grant supersu permission of the xposed module. To do this open xposed installer. After that, go to the framework section and press install. Grant the su prompt and you're all done :D
 
Last edited:

ghpk

Senior Member
Dec 29, 2010
470
132
India
thanks for your efforts,
if MMX A110 can run JellyBean 4.2.2 so can other MTK 6577 Devices, all we need is a dedicated programmer to fix the bugs.

I am Lava Iris 501 user and want 4.2.2 on it, Will try your port and update you by the weekend,

As you have posted a link for wi-fi fix, can you tell if this would solve the issue ?
Also if you can mention the file size on the Links post it would be easy for people who are downloading it to know the total and individual file sizes.

Many thanks again for your work on MTK 6577 device.
 

kishandoshi

Member
Nov 23, 2012
44
4
PRiMONeX™ ROM for Walton Primo G1

Fully stable Jellybean 4.2.2 ROM for Walton Primo G1


L6wed7i.png


Code:
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 */


Features:

1. Fully working 4.2.2 ROM with all the 4.2 core features.
2. Deodexed
3. Pre-Rooted with busybox
4. init.d scripts for better ram management and battery life.
5. Bloatware free
6. Xposed framework integrated
7. Gravitybox pre-installed
8. Xtheme Engine integrated.
9. Full Vanilla+ experience.
10. Nexus boot logo and animation.
11. Long term support :cool:


Downloads:

http://www.mediafire.com/download/45ryrry81deiv22/PRiMONeX_V2.zip (243 MB)

Credits:

@SuperDroid-BOND

Special Thanks to: mehedy
, Mosabbir Ahmed Khan, S.m. Tahmid, Tushar, Hossain Evan

For Download links, Installation procedure please check the #2nd post.


Walton Primo G1 official Facebook Group
helllo.. i want to port this rom.to my iball andi 4.5q. help me or please upload this rom at dh.st file uploader as i have low net speed and breaks connection on mediafire didnt resume. help me with that buddy
thanks
 
  • Like
Reactions: mehedy

falcon.eight

Member
Jul 19, 2012
16
2
please can you make correction of the bellow?

At first thanks you in advance for your great job.:good:

1. xposed framework upgrade fail.
2. gesture control fails receive, dial log.
3. sony liveview mn800 pairs but app link fail.
4. power consumption is too high.

and continue your work brother.:laugh:
 
  • Like
Reactions: musfiqus

Top Liked Posts

  • There are no posts matching your filters.
  • 17
    PRiMONeX™ ROM for Walton Primo G1

    Fully stable Jellybean 4.2.X ROM for Walton Primo G1


    primonex_banner_v3.png


    Code:
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     */


    Features:

    1. Fully working 4.2.X ROM with all the 4.2 core features.
    2. Loads of mods to customize
    3. Deodexed, Pre-Rooted with busybox
    4. init.d scripts for better ram management and battery life.
    5. Bloatware free
    6. Xposed framework integrated
    7. Gravitybox pre-installed
    8. Xtheme Engine integrated.
    9. Full Vanilla+ experience.
    10. Nexus boot logo and animation.
    11. VIPER4ANDROID Integrated:
    12. Xperia Z small apps Integrated:
    13. Kitkat UI Included:
    14. Sense 4 3D recent task switcher added
    15. Turbo music player added
    16. Long term support :cool:


    SMART EDITION EXTRA FEATURES:

    1. Smart Gestures
    2, Dual Sim 3G
    3. Dual Sim ringtone
    4. Dual dial button enabled dialer.


    Downloads:

    http://www.mediafire.com/download/shlah1h6rahq162/PRiMONeX_V3_SMART_EDITION.zip (444 MB)

    Credits:

    @SuperDroid-BOND

    Special Thanks to: mehedy, R Robin Rayhan, Mosabbir Ahmed Khan, S.m. Tahmid, Tushar, Hossain Evan

    For Installation procedure please check the #2nd post.


    Walton Primo G1 official Facebook Group
    13
    Download links and instructions

    Prerequisites:

    1. Walton Primo G1.
    2. You MUST be running Jellybean official/custom ROM before installing this ROM. If you flash this ROM on ICS it will NOT work.
    3. Custom recovery like CWM/TWRP (I prefer TWRP)
    4. And of course a fully functional brain in your head :cyclops:


    Installation:


    1. Download the zip file named "PRiMONeX_V3______EDITION.zip"
    2. Now put that zip file in SDCARD and reboot to your favorite recovery (CWM/TWRP)
    3. Wipe /cache, /data, /system, dalvik cache, /.Android_Secure
    4. Now install the zip and reboot after flashing.
    5. Enjoy the shiny new 4.2.X :D
    10
    Changelog and screenshots

    Change-log:

    Version 3.0: 1. Added smart gestures
    2. Dual Sim 3G
    3. Dual Sim Ringtone
    4. Dual button dialer
    5. Kit Kat launcher
    6. Kit Kat apps
    7. Kit Kat MOD
    8. Xperia Z small apps mod
    10. Sense 3D recent apps menu


    Version 2.0: 1. New base rom
    2. Reduced lag
    3. Fixed WIFI and usb storage
    4. Fixed autofocus


    SCREENSHOTS:


    pn3_7.png

    pn3_8.png

    pn3_2.png

    pn3_3.png

    pn3_10.png

    pn3_1.png

    pn3_5.png

    pn3_11.png

    10
    Reserved

    How to get other Google apps?
    Ans: You need to flash the gapps package after flashing the rom. You don't have to wipe anything during the gapps flashing. You can get the gapps package from here. http://d-h.st/nCG
    Can I install more xposed modules?
    Ans: Yes, of course. But before that, you have to grant supersu permission of the xposed module. To do this open xposed installer. After that, go to the framework section and press install. Grant the su prompt and you're all done :D
    3
    thanks for your efforts,
    if MMX A110 can run JellyBean 4.2.2 so can other MTK 6577 Devices, all we need is a dedicated programmer to fix the bugs.

    I am Lava Iris 501 user and want 4.2.2 on it, Will try your port and update you by the weekend,

    As you have posted a link for wi-fi fix, can you tell if this would solve the issue ?
    Also if you can mention the file size on the Links post it would be easy for people who are downloading it to know the total and individual file sizes.

    Many thanks again for your work on MTK 6577 device.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone