[ROM][BETA][12.0][Miatoll][OFFICIAL] Project-Elixir 1.1
- Thread starter tusharind007
- Start date
Thanks for the reply.
is it possible to turn off the encryption permanently? So I may be able to flash ROM updates in future through recovery.
You can already flash ROM updates through recovery. ROM installations do not need to access the data partition or the internal storage (as long as your ROM's zip file is not on the internal storage). So whether data is encrypted or not should have zero impact on your ability to flash a ROM in the normal way.
Hello again, after operating this rom for a bit. It's excellent for me except some minor issue ,when on messenger or Instagram video call the other person can't hear me that good . Can I provide some kind of logs ?
hey first of all let me thank you for the great work with this rom ....there is one major isaue that i found on this rom and that is ..al streaming media app video freezes after every few secs.. no matter which internet i am on.... or which streaming app i am on wheather youtube or hotstar streaming video freezes after every few secs...am i the only one facing this issue ?
hey my bad on further research this seems to be an issue with android 12 itself .. it is even reported on actual pixel devices by a lot of users .. with no fix available till now except for uninstalling roku app which i did not have installed in the first place ... how ever a factory reset on ur rom seems to have fixed it for now
My ROM was on internal storage as I don't have OTG cable or SD card. Nevertheless I was able to flash through ADB side load. One thing though I was not able to upload the ROM file or any other file through ADB function to my internal storage event after mounting the storage through recovery.
I am facing another issue. Sometime my internet data switches to edge and then do not revert to LTE. However, when I reboot the mobile LTE starts working again
Hello, awesome rom so far, stable enough for daily use. Since yesterday that I flashed it I noticed some minor things
1) Volte Vowifi icons don't appear on status bar, I just check during call for the HD/Wifi icon.
2) Mic volume is a bit lower than before.
3) Fingerprint rarely works, trying to add a new one just gives many partial or not found wanrnings. Sensor and fingers are clean, worked flawelessly on previous rom.
I haven't checked the rom extensively yet, theese are some "bugs" I encountered so far. Nevertheless, it's great to see new aosp roms for miatoll, keep up the good work!
1) Volte Vowifi icons don't appear on status bar, I just check during call for the HD/Wifi icon.
2) Mic volume is a bit lower than before.
3) Fingerprint rarely works, trying to add a new one just gives many partial or not found wanrnings. Sensor and fingers are clean, worked flawelessly on previous rom.
I haven't checked the rom extensively yet, theese are some "bugs" I encountered so far. Nevertheless, it's great to see new aosp roms for miatoll, keep up the good work!
Hi dev, first of all, at a glance, it is quite good, not to mention is stable tho, but in the less-than-24 hours I've tested the rom, some capabilities aren't working as expected:
- Notification LED isn't blinking altough it's activated 'Blinking light' on Notification settings
- FP is working normally (some guys have said its crappy, but i don't think so)
- Tried to install nethunter + root from recovery and it succedeed, but when i tried to open the app, it just crashes
- Device volume is kinda low, and not to mention the quality has decreased significantly
Looking forward to read your reply, and thanks in advance
-> Current device Xiaomi Redmi Note 9s - miatoll (curtana)
- Notification LED isn't blinking altough it's activated 'Blinking light' on Notification settings
- FP is working normally (some guys have said its crappy, but i don't think so)
- Tried to install nethunter + root from recovery and it succedeed, but when i tried to open the app, it just crashes
- Device volume is kinda low, and not to mention the quality has decreased significantly
Looking forward to read your reply, and thanks in advance
-> Current device Xiaomi Redmi Note 9s - miatoll (curtana)
Notification LED works fine for me on Curtana. As does the fingerprint reader.Hi dev, first of all, at a glance, it is quite good, not to mention is stable tho, but in the less-than-24 hours I've tested the rom, some capabilities aren't working as expected:
- Notification LED isn't blinking altough it's activated 'Blinking light' on Notification settings
- FP is working normally (some guys have said its crappy, but i don't think so)
- Tried to install nethunter + root from recovery and it succedeed, but when i tried to open the app, it just crashes
- Device volume is kinda low, and not to mention the quality has decreased significantly
Looking forward to read your reply, and thanks in advance
-> Current device Xiaomi Redmi Note 9s - miatoll (curtana)
I am currently using an unofficial PixelExperience ROM for my Redmi Note 9 Pro (joyeuse). In the changelog notes I see that it says "Flash Latest (MIUI 12.5) firmware", do I need to flash MIUI first or can I immediately switch from PixelExperience to this ROM?
I know nothing about this stuff so take my word with a grain of salt, but I went from LegionOS (Android 11) to this on Curtana (9 Pro India) and it's working well for me.
Version 1.5 fixed an issue i had with WiFi disconnecting. As of 01/04/2022 i haven't found any issues in version 1.5 and I've been running it for about a month. Great Rom, 10/10 would recommend flashing this.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
15
Code:* Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. * You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions, and proper bug reports are important to us but don't be disrespectful to anyone here. Your suggestions and proper bug reports will be taken into consideration.."
Project Elixir is another aftermarket AOSP ROM which basically offers minimal UI enhancement & close to Stock Android ROM with great performance, security and stability. Most of the OEMs' these days will provide slow and untimely updates, but we don't do that here. We closely follow Google to bring the latest updates to our users, and even prolong support for devices that have been declared obsolete by OEMs. Our ROMs' source code is open-source, secure, stable, and outstanding. Your experience while using Project Elixir will be butter smooth without compromising the quality of the Android experience. In short, it's perfectly balanced between Great Performance, Security, stability, minimal UI & awesome features including pixel goodies So do not hesitate anymore, join us now and start enjoying the beauty of stock Android. Download and enjoy Project Elixir on your respective devices!
- Saurav - Founder & lead Developer
- Smokey - Core Developer & Support Team
- Sarthak - Developer & Project Coordinator
- Abhishek - Developer & Support Team
- And Also Our Hardworking Maintainers
NOTE: As we keep updating source so its hard to keep threads updated everytime everywhere so kindly visit our elegram group for latest changes and screenshots.
// Features of Initial Android 12 Build and will be updated on every release //
Code:- Pure Pixel Goodies - 3 finger Screenshot - Monet Theme - Themed Icons - Most of the a12 Stuff - Allow user to add/remove QS with one click - Add option to scramble pin layout when unlocking - Bluetooth battery level when available
---------- SourceForge ! ----------
NOTE: Please keep in mind that these are Gapps Builds and there is no vanilla build of this rom available.
NOTE: It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
CLEAN FLASH (Moving From A11 to A12)
- Download the latest build and Recovery (Link is HERE)
- Take a backup for safe side
- Boot to Recovery
-- Wipe Cache, Dalvik Cache and Format Data by typing yes
- Flash the latest build
What works?
Wifi | RIL | Mobile data | GPS | Camera
Flashlight | Camcorder | Bluetooth | Fingerprint reader | Lights | Sound | vibration
Almost everything
What doesn't work? or Any Bug ?
You tell me!
BUG REPORT !!
As soon as the problem occurs, take a logcat and please inform us via Telegram or XDA.
for more READ THIS
- Android Open-Source Project
- Pixel Experience
- LineageOS
- Havoc-OS
- ProtonAOSP
- AOSPA
- Project-404
- ShapeShiftOS
- Wave-Project
- Fluid OS
// Special Thanks to Nipin, Subham and Raghav //
- Others, I may have forgot to mention
- Android OS version: 12.0
- Security patch: October 2021
- Build author/Device Maintainer : TusharInd007
- DEVICE: Redmi Note 9S/Pro/Pro Max/POCO M2 Pro
- DEVICE CODENAME: Miatoll
---------- Sources and Documentation ----------
- ROM Source Code
- Kernel Source
- OFFICIAL DEVICES
---------- Join Telegram Group & Channel ----------
-- DEVICE UPDATE TELEGRAM CHANNEL --
-- SUPPORT/DISCUSSION TELEGRAM GROUP --
As you know build is free but building ROM needs a server. And Maintaining source and device stuff needs a server and it's pretty expensive for a student. It will be really helpful and appreciated if you donate or contribute to us. Also if you have any queries related to donation you can freely message -> Saurav (Founder & lead Dev)
PAYTM UPI ID : dwarmachine24@paytm
GPAY UPI ID: dwarmachine24@oksbi
PAYPAL: https://www.paypal.me/uglykid24
3Changelogs
Safetynet Passes by default
GCam Go as default camera
Selinux Enforcing
Gapps Included
28 Nov 2021
November security patch
Add offline charging LED indicator
update blobs from gram-V12.5.2.0.RJPINXM
Add ambient wake for notification support
Switch to few prebuilt audio hals
Update media configs from CAF
Update rootdir from CAF
Introduce KCAL color control
Enable exFAT support
dropped [email protected] implementation
Note:
Flash Latest (MIUI 12.5) firmware1@tusharind007 Just a teeny tiny bug
When connected to the charger, the battery icon in the status bar doesn't indicate any flash
icon, no charging animation or nothing on the lockscreen. I thought my phone had a hardware issue but then checked it in the settings and it was showing "charging wirelessly". So, it's not a big issue but it needs a little attention. Thanks again.11New Update Pushed
changelogs:
Fixed Turbo Charge indication
Fixed google voice recorder
Fixed sound distortion on wired headphones
Fixed spotify volume changes between songs
Fixed low speaker volume
