[ROM] BeyondROM V4.5 [23/06/2022] [FVE6] [June Patch] [A12] [G980F-G981B-G985F-G986B-G988B]
- Thread starter starbucks2010
- Start date
On the G980F not working, I used the one that is in the installation instructions
Of course its not working. Try xs1 twrrp from https://forum.xda-developers.com/t/...-for-galaxy-s20-s20-s20-ultra-exynos.4441701/
And replace twrp inside
Last edited:
Scrap that, this was actually a very bad idea...
Last edited:
That's right, thanks for the advice, it's already working and working. I had a problem with vbmeta, it must be put in ODIN into the CP slot and by no means into the userdata. Everything OK.Of course its not working. Try xs1 twrrp from https://forum.xda-developers.com/t/...-for-galaxy-s20-s20-s20-ultra-exynos.4441701/
And replace twrp inside
would like to know this if this is better then the one providedDid anyone try the latest official TWRP from here:
[RECOVERY][OFFICIAL][3.6.1-x] TWRP for Galaxy S20 / S20+ / S20 Ultra Exynos
Official TWRP 3.6.1-* For Galaxy S20 / S20+ / S20 Ultra Only for exynos variants - G980F / G981B / G985F / G986B / G988B (Europe - Global, Single/Dual-SIM) Disclaimer I am not responsible for bricked devices, dead SD cards, thermonuclear war, or...forum.xda-developers.com
And which vbmeta do we have to take?
i have a issue cant install the latest even updated to the latest firmware but beyond thinks im not on the latest i download the latest using the frija,
Update in ODIN https://samfrew.com/download/Galaxy__S20__Ultra__5G__/Oelk/DBT/G988BXXUEFVDB/G988BOXMEFVDB/
Attachments
and as far as i know its the latest version here in australia i used frija tool and sammobile now looked other countrys and they have the right version to what beyond is
would that effect my network carrier and sorry for asking help here never had this issue before
You can simply install the bootloader and modem, then install BR 4.4
In the Odin program window, specify the paths to the firmware files in the appropriate fields:
BL file.......... insert tar.md5 into the "BL" field
CP file(or MODEM).......... insert tar.md5 into the "CP" field
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
3I have made a new installation guide for those who are stuck.
1 enable dev menu ( information-software and tap build number many times)
2 go to dev menu and see if oem unock is visible, enable it and continue.
(if oem unlock not visible, then disable automatic time and date and check again)
(repeat step 2 till oem unlock is visible and enabled in dev menu.)
3 Reboot to download mode ( turn off and wait 2 sec or more - hold volume up and down and connect usb cable)
4 in download mode long press volume up and up again to verify unlock ( phone will prompt factory reset)
5 setup your phone and repeat step 1-2 ( You should see: bootloader is already unlocked)
6 Open odin on your pc and enter download mode on your phone.
7 connect usb cable and load twrp+vbmeta in ap section in odin.
8 in odin go to options and uncheck auto reboot
9 click start and blink your eyes.
10 TWRP flash is successful.
Reboot to twrp by force restart your phone with power(bixby) button and volume down button.
After the phone switch of and before it boots up, immediately change to volume up button and keep holding the power button.
Wait till 1-2 seconds after you see the samsung logo and release butons.
*phone off: usb connected, volume up, volume down = download mode*
*phone off: usb connected, power button, volume up = recovery (twrp)*
*phone on: usb connected, volume down, power button = force restart*
In twrp:
11 go to wipe - advanced wipe - change file system
12 change to ext2 and change back to ext4
13 reboot twrp
14 send Beyondrom to phone with usb cable
(if drive cannot be mounted, disable-enable mtp)
(if still not able to mount repeat step 11-12-13)
15 go to install and install rom file
16 go to wipe and delete data only!
17 reboot
18 Beyond Rom installation successful
if bootloop, delete data again and reboot.
Or repeat step 11-17.2Secure folder and google pay work ok on latest BR
S10 TWRP doesn't support /data encryption so in not a matter of rom support or not for /data encryption.2I guess nobody tested this. Theoretically, the device should boot but you won't be able anymore to use twrp until you wipe your data and prevent the re-encryption at boot.2
Its noted in the "[HOW-TO][EXYNOS/SNAPDRAGON] Root S20 series and upgrade firmware" thread that for stock ROM in this case, after ROM flash you need to boot into TWRP immediately, the wipe data, and then flash this zip to disable encryption and stock recovery restoration...a few months back id tried using the same multidisabler zip i (and everyone else) had previously used and it stopped working and i was scratching my head until @serajr came to the rescue and realised Samsung had changed a path, and whipped together a new one and saved my day(and by now plenty of others)
[HOW-TO][EXYNOS/SNAPDRAGON] Root S20 series and upgrade firmware
Applicable Models: All Exynos models...
forum.xda-developers.com
hope this helps1 -
60BeyondRom V4.5
Based on Android 12 G98xF(B)XXSEFVE6 firmware
Supported Devices: G980F, G981B, G985F, G986B and G988B
ROM Features
<*>Supported devices: G980F (S20), G981B (S20 5G), G985F (S20+), G986B (S20+ 5G) and G988B (S20 Ultra)</*>
<*>Base OneUI 4 Android 12 G98xF(B)XXSEFVE6 deodex June 2022 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed dm-verity, automatic encryption, proca & vaultkeeper services</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.2.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v4.5
<*>Updated to latest FVE6 June 2022 OneUI 4.1 patch level</*>
Fixes
<*></*>
Credits
- John Wu for Magisk
- Superr for the kitchen
- 3arthur6 for S20 TWRP
- aliwaris for incallui mods
- adil192 for some shealth mods
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
- LeeXDA18 for all fixes
- All testing team
Download Links
G980F-G981B-G985F-G986B-G988B Link
Official TWRP thread for S20 Series
TWRP + VBMETA for all S20 Series (z3s)
Older ROM Links
BR4.4 FVDB Link
Installation procedure
IS RECOMMENDED TO BE ON ANDROID 12 FVE6 FW BEFORE FLASHING BR 4.5 !!!
Dirty flash of BR 4.5 over BR 4.4 was NOT TESTED !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download latest FVE6 stock FW for your phone model and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download Android 12 compatible TWRP (twrp_3.6.0_oneui4+EUL7_vbmeta.tar) from below or visit official TWRP xda thread (link above) and use the latest official TWRP. Just be careful that the one from official thread doesn't contain the patched VBMETA file.
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When boot in TWRP, wipe your data if you're encrypted, flash BR 4.x zip and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
S20 series Root and FW upgrade
BeyondROM S20 Telegram chat
PayPal link
Happy flashing good people!1010the rom has been updated to the latest nov 2021 fw DUJ5 ... happy flashing !
don't forget to take backups before flashing!9Hybrid Modpack for S20 & S21 Exynos Series with BeyondRom 14.09.2021
Current Version: 1.6
Supported Devices: SM-G980F, SM-G981B, SM-G985F, SM-G986B, SM-G988B
Supported BeyondROM Version: 3.7
Supported Firmware Version: XXU9DUH5
Instructions:
- Backup your System with TWRP. I'm not responsible for any damage.
- Flash the Modpack via TWRP
- Make sure you have selected the correct variant.
- If you use Xposed and xposed modules, it might create some issues with the SystemUI Mods inside of the modpack. Be warned.
- Please save the Aroma Log at the end of the Modpack installation. It might help for troubleshooting.
- Let me know if something is abnormal or not working.
Debloat:
- Debloat Google, Samsung and Misc Apps
Fixes:
Samsung Dex Fix
Mods:
- Audio:
Viper4Android
Stock
- SystemUI:
All SystemUi Mods incl. 3Minit Battery
DisabledWarnings+MultiTile
DisabledWarnings+MultiTile+CircularBattery
Stock
- Fonts:
Modded Samsung Sans
Google Product Sans
Stock
- Streaming:
Streaming Mod for Amazone Prime and Netflix SD
Stock
- Multimedia:
Youtube Vanced
Stock
- CSC_Change:
You can change the CSC if you want to
CSCFeatures:
Override Data Icon
Enable Wifi Advanced Menu
Disable AntiMalware
Set Color of Days to XXXXXBR
Enable Shutter Sound Menu in Camera
Enable Camera during Calls
Enable SMS Notification Popup in Camera
Provider for unknown Number
Enable LTEOnly in Network Menu
Enable Realtime Networkspeed
Quicksetting Toggles
Enable Callrecording
Enable Protection for Recent Apps
Disable Knoxguard
Enable eSIM Support
Enable Applock
Enable Data Usage on Quickpanel
For Viper4Android how will need to activate Legacy Mode in it
Streaming Fix doesnt activate Netflix HD on rooted devices
Some CSCFeatures aren't working anymore on Android 11
If you want to download additional Battery Icon then look here:
Here
Thanks for @gharrington for this
@starbucks2010
@ZonalRipper
@ianmacd
@gharrington
@afaneh92
@exocetdj
@zidane02 for some help
@Grouxho
S20 & S21 Testing Crew
1.0: Initial Version
1.1: Added Support for SM-G996B
Some Script corrections
1.2: Removed BT and Safetynet Fix, not needed
Added Samsung Free to Debloat / Bloat List
Viper4Android works now with stock kernel too
1.3: Removed Option to Restore Bloatware (no one is using this)
Added 2 more Mods:
1. Disabled low Battery Warning
2. Possible to use camera flashlight on low battery level
1.4: Updated S21 SystemUI Mods to BeyondROM 1.3 based on XXU3AUF2 Firmware
Updated S20 SystemUI Mods to BeyondROM 3.4 based on XXS8DUE4 Firmware
Added MultiTile Mod
Updated Samsung Dex Fix
1.5: Updated S20 SystemUI Mods to BeyondROM 3.5 based on XXU8DUF9 Firmware
Updated S21 SystemUI Mods to BeyondROM 1.5 based on XXU3AUG4 Firmware
Removed 3Minit Clock
1.6: Updated S20 SystemUI Mods to BeyondROM 3.7 based on XXU9DUH5 Firmware
Updated S21 SystemUI Mods to BeyondROM 1.7 based on XXS3AUHD Firmware
Added Circular Battery
Added SystemUI-Mods + Stock for each variant of S20 & S21 series
Possible to Reinstall AR Apps
Have Fun!
