[ROM] BinDroid ONE V3.2.1 | SM-T310 | Tweaked Optimized KitKat | BNG1 | ONLINE

[Mussels84]

Just a quick question for you all. I've been using version 3.2.1 since it was released and I love it so much, it's now my permanent ROM. The only thing is I can't get it to recognize the SD card when trying to download files with my Web browser. I use dolphin Webbrowser and when I try to change the download directory to the SD card, I get the following error message: can't find file or directory. Please make sure that your SD card is ready and your USB Mass Media is turned off.

I've tried the SD fix: Kit Kat writable Micro SD card from Play Store.

Any ideas would be great.

Thanks.

my guess is dolphin browser isnt compatible with it, under kitkat.

i use ES file explorer and download with that, and it lets me choose a download directory.

 

[Cpt_Chaos]

my guess is dolphin browser isnt compatible with it, under kitkat.

i use ES file explorer and download with that, and it lets me choose a download directory.

I use that too. But when I download files while using my Web browser, it doesn't give me that option. I hate downloading things to internal memory.

 

[Mussels84]

I use that too. But when I download files while using my Web browser, it doesn't give me that option. I hate downloading things to internal memory.

must be a flaw with dolphin i guess

 

[DigitalMD]

must be a flaw with dolphin i guess

Why your SD card doesn't work the same in Android 4.4 KitKat, and the reasons for the change....
http://www.androidcentral.com/kitkat-sdcard-changes

---------- Post added at 12:07 PM ---------- Previous post was at 12:02 PM ----------

Just a quick question for you all. I've been using version 3.2.1 since it was released and I love it so much, it's now my permanent ROM. The only thing is I can't get it to recognize the SD card when trying to download files with my Web browser. I use dolphin Webbrowser and when I try to change the download directory to the SD card, I get the following error message: can't find file or directory. Please make sure that your SD card is ready and your USB Mass Media is turned off.

I've tried the SD fix: Kit Kat writable Micro SD card from Play Store.

Any ideas would be great.

Thanks.

http://www.androidcentral.com/kitkat-sdcard-changes

 

[rlrmineiro]

Great work! Have been running the Rom for a week now and it works pretty well. I have one request though. .. I use some of the missing apps quite a lot, especially the Samsung stuff. Could you please post a zip file with the removed apks so I can flash them? Thx for the help.

Sent from my GT-I9505 using xda premium

 

[murayoshi]

does anyone here get stuck @ samsung logo after flashing this rom or is it only me. try it also with the latest twrp no go. I clear everything, dalvik, cache, data, system. I'm coming from stock rooted rom. any idea?

 

[Mussels84]

does anyone here get stuck @ samsung logo after flashing this rom or is it only me. try it also with the latest twrp no go. I clear everything, dalvik, cache, data, system. I'm coming from stock rooted rom. any idea?

rom or kernel? the kernels dont work on 4.4 yet

 

[murayoshi]

rom or kernel? the kernels dont work on 4.4 yet

thanks for response I greatly appreciate it. I am coming from stock 4.2.2. But what ever I do just get stuck to samsung logo. Is it possible if I just upgrade the kernel? If upgrade my bootloader it might brick when I go back to stock 4.2.2. Do you know where can I get the kernel for this rom so i can flash the latest bindroid?

 

[Mussels84]

thanks for response I greatly appreciate it. I am coming from stock 4.2.2. But what ever I do just get stuck to samsung logo. Is it possible if I just upgrade the kernel? If upgrade my bootloader it might brick when I go back to stock 4.2.2.

what are you flashing, the kernel or the rom?

if its just the kernel, what rom version are you on?

i know i had issues flashing using philz recovery with the older ROM versions, but the latest one flashed just fine for me.

 

[murayoshi]

@Mussels84 1. what are you trying to flash, kernel or rom.....trying to flash rom Bindroid 3.2.1 but always get stuck on samsung logo.
2. what rom version........stock rom 4.2.2 that comes with the tablet but rooted.
Do I need to flash T310UEUCNF4 to work? This one has a new bootloader might brick my tablet unusable if I go back to stock 4.2.2 is it? If i just can uprade the kernel its fine, I can downgrade anytime I want. Do you know where can I download the kernel fot this?

 

[aaldiar]

I think you need to upgrade more than just a kernel if you are going from 4.2.2 to 4.4+. I know on my S4 that meant upgrading the radio as well. I had the same problem as you on my tablet until I upgraded to the latest firmware, re-rooted my tablet, and installed bindroid latest. Great ROM, but I love my SlimKat to much.

 

[Mussels84]

i definitely installed a 4.4 stock rom, before going this.

 

[murayoshi]

@aaldiar..I know, I remember my s3 before that you have to install insecure kernel and radio before it works. thanks for response.
@Mussels84...I guess so i think there's no way around..TY again

 

[xmanz]

i definitely installed a 4.4 stock rom, before going this.

I rember installing. Twp on original 4.2. Then rooting then abackup then wipe. Factory Then a straight install of this rom no problems whatsoever ?

 

[Cpt_Chaos]

I rember installing. Twp on original 4.2. Then rooting then abackup then wipe. Factory Then a straight install of this rom no problems whatsoever ?

Im also upgraded from a stock 4.2.2 to a custom 4.2.2 and then upgraded to this Rom with no problems. Other than the normal things (complete system wipe, etc.), I upgraded my twrp to 2.7.1 KK compatible, then wiped and installed no problems. I haven't messed with the kernel or anything yet.

 

[djjozo]

Hey Danny what is the 3.2.1fix.zip on the bindroid download page for? Am currently on 3.2.0, was wondering if it's a separate file to fix the video player and fonts fc. If not, is it okay to dirty flash 3.2.1 over 3.2.0?

 

[new-noob]

I think you need to upgrade more than just a kernel if you are going from 4.2.2 to 4.4+. I know on my S4 that meant upgrading the radio as well. I had the same problem as you on my tablet until I upgraded to the latest firmware, re-rooted my tablet, and installed bindroid latest. Great ROM, but I love my SlimKat to much.

Hi, with slimkat, are you able to overclock cpu?

 

[new-noob]

There are 3 kernels available:

1. BinDroid-SM-T310
2. BinDroid-SM-T311
3. BinDroid-SM-T315

##############################################
## Samsung Gtab3 8.0 - T310 - T311 - T-315  ##
##############################################
## Samsung SM-T31x Exynos 4212 kernel	    ##
##############################################
##  V2.0.0 ##
#############
New clean source build
Better merge of all variants
OC patch up to 1800Mhz
kernel log buffer to 512KB
Support dynamic CPU hotplug DVFS
OTG Support
MobiCore Disabled
##############################################
##############################################
##  V1.0.0 ##
#############
General setup - kernel log buffer = 19
System type Support dynamic CPU hotplug
##############################################
##############################################
## Build 3 ##
#############
OC up to 1700Mhz
##############################################
##############################################
## Build 2 ##
#############
Patch: Removed Debugging
Patch: exFAT 1.2.4 Filesystem
lulzactive governor added
hotplug governor added
combined defconfig for al 3 versions (WIP)
##############################################
##############################################
## Build 1 ##
#############
System Type
	Max CPU freq. set to 1500MHz
CPU Power management
	CPU Freq. scaling
	- enabled interactive governor
	- enabled conservative governor
	- enabled adaptive governor
File systems
-enabled NIFS2 support
	DOS/FAT/NT Filesystems
	- enabled NTFS + write support
	Network File systems
	- enabled CIFS + extended attributes
##############################################
##############################################

Click image to downloadpage



SourceCode​

Getting Black Screen after installing both kernel's v2.0 and build 3 using TWRP
- looks like factory reset and rom installation boots tab normaly but when changing kernel, just getting black screen...any one had this issue ?

 

[Mussels84]

Getting Black Screen after installing both kernel's v2.0 and build 3 using TWRP
- looks like factory reset and rom installation boots tab normaly but when changing kernel, just getting black screen...any one had this issue ?

what rom are you using? I dont think those kernels are for KK

 

[new-noob]

what rom are you using? I dont think those kernels are for KK

I am on " BinDroid ONE Gtab3 8.0 T310 V3.2.1 KK "