• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][CFW][10][begonia] Pixel Experience [OFFICIAL][AOSP]

Search This thread

muankit

Senior Member
Sep 9, 2018
53
1
Does it have latest GCam preinstalled ? If not, any GCam which is best suited for this rom.
 

mmedei9

Senior Member
Jan 10, 2013
161
46
Anyone else having issues with system ui reboots randomly? I'm having them happen multiple times a day on all launchers I've tried which kills all apps running
 

Artimostu

New member
Jan 8, 2017
4
3
Anyone else having issues with system ui reboots randomly? I'm having them happen multiple times a day on all launchers I've tried which kills all apps running

Yes, this has been happening a few times a day with the launcher (Lawnchair) and several apps. Also SDCard issues. That behavior all started flashing the 2.1 CFW and PixelExperience_Plus_begonia-10.0-20201013-1137-OFFICIAL.zip update.
 

mmedei9

Senior Member
Jan 10, 2013
161
46
Yes, this has been happening a few times a day with the launcher (Lawnchair) and several apps. Also SDCard issues. That behavior all started flashing the 2.1 CFW and PixelExperience_Plus_begonia-10.0-20201013-1137-OFFICIAL.zip update.

Switched to cr droid and no crashing so far but have had one instance of the sd card being unaccessible which I also encountered on this ROM. I agree think it's linked to the CFW update

Update: just had first system ui restart. Need to look into going back to CFW 2 and older version of rom :(
 
Last edited:

TheAle

Member
Jan 27, 2015
16
0
What's this "Host: srv3.jhen09.com" I see on my hardware details for this rom? What exactly is being hosted and who is jhen09?

I do also have this question. In speedtest i get far less download speed and higher ping while in 4G mode than on other roms. Why is this? I can't really trust a rom like this to be honest
 
Hello, I have one little problem: everytime I get out home, I must turn off mobile and turn on again to connect. EVERY time. For me, it's not a big problem, it take me 0.5 seconds to do this, I just would like to know if it's just a problem of mine.
If I turn off wifi, then data mobile works correctly, this happen only when I disconnect from wifi cause it is our of range...
 

javiko_bcn

Member
Sep 3, 2012
37
1
Hi, the rom works great and i migrated to him from miui 12 official to try to get work android auto which didn't work in it. But Android auto isn't working in this room anyway. I think is problem with my device in particular but i want to know if it is possible to fix it with a custom kernel and which i can try.
My problems with android auto are the connecting/disconnecting all the time, i have tried with alot of cables and these works perfect with other phones in the same car.

Sorry for my english.
 

ZIDAN44

Recognized Developer
Update Time #CFW 2.1

Changelog:
• Kernel upstream to 4.14.206
• Enabled metadata encryption Partition
• Building gatekeeper & keymaster from source
• Building some audio & media blobs from source
• Building gralloc blobs from source
• Building most of the mtk hals from mtk oss
• Updated keymaster to 4.0
• Fixed apps randomly crashing
• Fixed sepolicy for 64MP camera
• Fixed L1 issues in netflix
• Fixed over heating issues
• Fixed over sharping in YT videos
• Fixed audio clipping issue
• Fixed call recording & BT echo
• Fixed fingerprint weake-up animation
• Removed unused xiaomi parts
• Removed some unused flags
• Videos looks more natural on YT
• Sounds are more perfect
• Much more smooth then before

Note:
• You must need to use TWRP-3.4.0-3 (https://sourceforge.net/projects/be....0-3-begonia_UNOFFICIAL_20201116.img/download) & also must need to do a clean flash.
 

quan2032

Member
Nov 14, 2018
11
6
Changelog:
• Kernel upstream to 4.14.206
• Enabled metadata encryption Partition
• Building gatekeeper & keymaster from source
• Building some audio & media blobs from source
• Building gralloc blobs from source
• Building most of the mtk hals from mtk oss
• Updated keymaster to 4.0
• Fixed apps randomly crashing
• Fixed sepolicy for 64MP camera
• Fixed L1 issues in netflix
• Fixed over heating issues
• Fixed over sharping in YT videos
• Fixed audio clipping issue
• Fixed call recording & BT echo
• Fixed fingerprint weake-up animation
• Removed unused xiaomi parts
• Removed some unused flags
• Videos looks more natural on YT
• Sounds are more perfect
• Much more smooth then before

Note:
• You must need to use TWRP-3.4.0-3 (https://sourceforge.net/projects/be....0-3-begonia_UNOFFICIAL_20201116.img/download) & also must need to do a clean flash.

I can't mount metadata on this 3.4 twrp, any help?
 

saiz0313

Senior Member
Changelog:
• Kernel upstream to 4.14.206
• Enabled metadata encryption Partition
• Building gatekeeper & keymaster from source
• Building some audio & media blobs from source
• Building gralloc blobs from source
• Building most of the mtk hals from mtk oss
• Updated keymaster to 4.0
• Fixed apps randomly crashing
• Fixed sepolicy for 64MP camera
• Fixed L1 issues in netflix
• Fixed over heating issues
• Fixed over sharping in YT videos
• Fixed audio clipping issue
• Fixed call recording & BT echo
• Fixed fingerprint weake-up animation
• Removed unused xiaomi parts
• Removed some unused flags
• Videos looks more natural on YT
• Sounds are more perfect
• Much more smooth then before

Note:
• You must need to use TWRP-3.4.0-3 (https://sourceforge.net/projects/be....0-3-begonia_UNOFFICIAL_20201116.img/download) & also must need to do a clean flash.
support call-recording?
need flash something or not ?
 

Alber Dlc

New member
Nov 18, 2020
1
0
Hi!! What do you mean by a clean flash? I have doubts if it is necessary to complete it or if the cache is already valid. Thanks a lot
 

ksadmir97

Senior Member
Mar 21, 2019
81
22
Hi all
Cal I instal this ROM without downgrade to Android 9?
Because my front Camera doesn't work on any Android 9 which I tried (MIUI 10, MIUI 11). Also when I install any rom I get an error on front camera "Can't connect to camera"
 

djdarksighter

Member
Sep 28, 2008
9
1
My headphones dont get detected when plugging in the headphone hack. Tried 5 different models and they all worked on previous version of PE Plus. Anyone has a fix for this?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 39

    GtwTyCR.png

    PixelExperience for DeviceName [begonia]

    What is this?
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 10.0


    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camcorder
    Bluetooth
    Fingerprint reader
    Lights
    Sound / vibration


    Known issues
    64 MP Mode Dosen't Work (Temp Fix: Flash ANX Camera Module)

    HOW TO FLASH PE
    Guide

    DON'T FLASH GAPPS, ALREADY INCLUDED
    Download

    Translation
    Help with project translation

    Stay tuned
    Our Telegram channel
    Our blog


    XDA:DevDB Information
    Pixel Experience For The Redmi Note 8 Pro

    Contributors
    ZIDAN44, Agent_fabulous
    ROM OS Version: Android 10

    Version Information
    Status: Stable

    Created 2020-03-01
    Last Updated 2020-04-08
    13
    NOTE: Vendor is included on CFW enabled builds! All builds From Now Are CFW!

    Kernel Source: begonia
    Device Source: PixelExperience-Devices

    A HUGE thanks to everyone who believed and helped test my builds! This would have been impossible without them. Here's them in no particular order :)
    - Agent_fabulous (Lead Dev)
    - Sagar Sorathiya (absolute madlad tester)
    - Sahil Sonar
    - Zinadin Zidan
    - Juan
    - Mashopy
    - Shanike
    - Martin
    - THEMAXIMUMPOWER
    And anyone else I missed!
    Also, huge thanks to @TheImpulson and @dev_harsh1998 for helping and contributing to begonia!
    13
    How to install Pixel Experience on the Xiaomi RedMi Note 8 Pro UnOfficial Noob Guide

    UnOfficial Noob Guide - Last Updated July 28, 2020)

    This is how I got it to work. There may be superfluous steps. All the outlines I found lacking because they were written by Android Genius Gods and they can't relate to us mere mortals. There are countless DEAD links, and flat out WRONG directions pointing people on endless goose chases looking for files that "should" be there and aren't. Anyways, I finally found them all and got it working. Use at your own risk yada yada. As of the writing of this text (2020.07.28), the fingerprint sensor is dodgy and I'm still trying to figure out how to make Google Pay work. I'm sure there are other issues, but I haven't found them.

    Prep Work

    I don't trust Xiaomi, their business model is selling user data to make up for cheap hardware. And I hate the User Interface. And I hate the bloatware. Let's eliminate all those problems by putting something nice and clean on it, like Pixel Experience. This is how you do that. So when you get your phone,

    1. Get Mi Account here: https://account.xiaomi.com/pass/register?_locale=en

    2. Turn on the phone, go through the preliminary wizard install stuff, unchecking everything you can, etc. Don't sign in to your Google Account. Go to "Settings" - "Mi Account" and log in to your account. Put your sim card in, you will need to have it TEXT verified. Once done with all these prep-work steps, take the sim card out and put it back in your old phone while you wait a week. (this phone requires you to wait 1 week (168 hours) before you can unlock it.)

    3. To make sure you are doing this right, (and don't have to wait 2 weeks instead of 1) download & unzip the Mi Unlock tool from here: https://en.miui.com/unlock/download_en.html. (I used miflash_unlock-en-4.5.707.49.zip)

    4. Try to run "miflash_unlock.exe" > Agree > sign in > and Unlock your phone, it should start giving you the countdown of 168 hours to go. This is stupid and unavoidable. I know. Just make sure it's all set and counting down. Yes, you can check this anytime and see the new number of hours remaining.

    3. While you're in the settings, get into developer mode by tapping the Miui Version number many times until it says "You are now a developer."

    4. Turn off all your security settings (pattern, passwords, face rec, etc) (important)

    5. Go into Settings > Advanced Settings > Developer Mode. Turn on USB debugging and turn on OEM Unlock.

    6. Find out what version of Android Miui you are operating on. To do this go to Settings, About phone. Take a Screenshot (volume down & power) you may need these numbers later. If you are operating on Android 9.xx, this is good. For me personally, I had MIUI Global 11.0.6.0 PGGMIXM & 9 PPR1.180610.011

    (6a. If you are on Android 10.x you will need to downgrade to 9.0.
    A. Download & install MiFlash tool from here: https://www.xiaomiflash.com/download .
    B. Download compatible “FASTBOOT” firmware here: https://xiaomifirmware.com/roms/miui-roms-redmi-note-8-pro-begonia/ make sure you grab the fastboot version.
    C. Download & install Universal ADB Drivers from here: https://adb.clockworkmod.com/
    D. Unzip the file with 7-Zip.
    E. Run the MiFlash tool, set your folder to your firmware folder. Choose “clean all” in the bottom right-hand corner.
    F. Click FLASH.
    Done. )

    7. Put your sim card back in your old phone and enjoy the last week with your phone. Backup your stuff however you want to. If you've signed in to Google's services (drive, contracts, photos, etc), it should be all there. You can check here. https://drive.google.com/drive/u/0/backups Note the date. If you are doing it to your existing phone, just plan on losing all your data plan accordingly. For me all the data on the microSD card was untouched.

    8. Now that the 168 hours are up, run again "miflash_unlock.exe" > Agree > sign in > and Unlock your phone, it should work now.

    Download Work
    (Obviously download the latest version if they have it - I put the exact file name for the files I used for reference)

    9. Download and unzip into a handy folder the latest "Download SDK Platform-Tools for Windows" (I used platform-tools_r30.0.3-windows.zip at time of writing) from here (https://developer.android.com/studio/releases/platform-tools)

    10. Download & install Universal ADB Drivers from here: https://adb.clockworkmod.com/ (I used UniversalAdbDriverSetup.msi) Make sure the drivers work. (You can see your Phone in Device Manager)

    In no particular order: (Put these 3 files somewhere handy, you will be moving them over to the phone eventually)

    11. Download the latest Pixel Experience Plus from here https://download.pixelexperience.org/begonia (I used PixelExperience_Plus_begonia-10.0-20200714-2146-OFFICIAL.zip)

    12. Download begonia-A10-CFW_20200530.zip from here https://sourceforge.net/projects/begonia-oss/files/CFW/begonia-A10-CFW_20200530.zip/download

    13. Download Magisk-v20.4.zip from here: https://magisk.me/zip/

    Put ALL the rest of these files below in your handy folder from step 1 (/platform-tools)

    14. Download lk.img & preloader_begonia.bin from here: https://forum.xda-developers.com/devdb/project/dl/?id=32337

    15. Download TWRP for Xiaomi Redmi note 8 Pro from here: https://twrp.me/xiaomi/xiaomiredminote8pro.html (I used twrp-3.4.0-0-begonia.img)

    16. Download twrp-CFW-3.3.1-0-begonia_UNOFFICIAL_0506.img from here: https://forum.xda-developers.com/showpost.php?p=82752783&postcount=141

    Installing Work
    17. On the PC, open up a command prompt (CMD). Navigate to your handy folder from Download Work Step 1 above. (/platform-tools). Plug in your phone. Make sure windows sees it.

    Keep this Command Prompt open the ENTIRE TIME. (just to save you time and hassle) (YES - You can copy and paste these commands)

    18. Type the following commands, one at a time hit enter after each.

    adb devices - (making double sure you see the device, looks like a serial #)

    adb reboot-bootloader - (this will reboot phone into FastBoot Mode)

    adb devices - (again to make sure you see the device, looks like a serial #)

    fastboot flash preloader preloader_begonia.bin

    fastboot flash lk lk.img

    fastboot flash lk2 lk.img

    fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img

    Fastboot flash recovery twrp-3.4.0-0-begonia.img

    19. Unplug the phone. Press and hold Power and Volume UP. When it reboots, you can let go of the power button when it vibrates or you see the RedMi text (but still keep holding the Volume Up button) until you see this menu:

    wyJtbIg.jpg


    Note the little "<<==" RIGHT of the option.

    20. Select [Recovery Mode] by following which button it says to push to navigate. Then hitting the Volume DOWN Button

    This will boot you into TWRP (AKA "any non-CFW Android 9 recovery"). The intro flash screen looks like this:

    mwtloUr.jpg


    21. Select WIPE > Advanced Wipe > Select: System & Cache & Dalvic Cache > Swipe to wipe.

    22. Hit the Home button on your phone. Move over to the PC.

    23. On the PC copy over "begonia-A10-CFW_20200530.zip" to someplace on the internal or SD memory.

    24. On the PC copy over "PixelExperience_Plus_begonia-10.0-20200714-2146-OFFICIAL.zip" to someplace on the internal or SD memory.

    25. Go into Install > begonia-A10-CFW_20200530.zip then go back and

    26. Go into Install > Pixel Experience Rom (for me is was PixelExperience_Plus_begonia-10.0-20200714-2146-OFFICIAL.zip) Should take a few minutes.

    27. Hit Home

    28. Select WIPE > Format Data > type "yes" (tap checkmark)

    29 . Reboot > Bootloader

    30. This will reboot the phone back into Fastboot mode. Then on the PC type this:

    fastboot flash recovery twrp-CFW-3.3.1-0-begonia_UNOFFICIAL_0506.img

    31. Then this is the last command that'll reboot your phone, on the PC type:

    fastboot reboot (enter)

    And It "should" go eventually (it'll reboot a few times) into the Android setup wizard for Pixel Experience.

    Setup Note: It crashed for me when trying to setup the fingerprint scanner, so skip that part of the wizard for sure.

    32. Setup your phone how you likes it. But in order to get some other things to work (Like Google Pay), you need to install Magist, an app that will help hide the modified nature of your phone.

    Now you need to install Magisk, it's a software that can help "hide" the Rooted Status of your phone so you can use things like Google Pay.

    33. On the PC copy over "Magisk-v20.4.zip" to someplace on the internal or SD memory.

    34. Unplug and Turn off your device.

    35. Turn it on via holding Power + holding Volume UP. Keep Volume upheld until you get into TWRP again. This step was just like before.

    36. Install > MagiskXXXX.zip

    37. Reboot.

    38. Once back in Android, you should see the new App Magisk.

    Note: Google now thinks I have a Pixel 4XL

    If I figure out how to make google pay work, I'll add it here.
    10
    Why is the second post the exact copy of the one in the POSP thread?
    Because every rom released for this phone so far are collective efforts by more or less same set of developers and testers.
    9
    Update Time

    Source Changelog:
    * April Patch, well, thats expected, nothing new.
    * We added long screenshot.
    * We have a screen recorder, and it’s like iOS,just a QS Tile, easy.
    * We added face unlock, ported from Motorola.
    * We added options on Plus edition to improve navigation gestures experience.
    * Android Auto would work fine on PE after April Patch.

    Device Changelog:
    * Call UI Fixed
    * Added Xiaomi Parts
    * Include Stock ARCORE
    * Include WIFI EXT
    * Many More...

    Note: You Must Do A Clean Flash...!!!
    Also Join Support Group - https://t.me/PE_Begonia