[ROM][CFW][10] crDroid 6.x [begonia/begoniain][OFFICIAL][ANTIBRICK]

Search This thread

TTTT555

Member
May 31, 2018
48
57
Saint Petersburg
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned


crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn

BEFORE YOU DO ANYTHING, PLEASE READ THIS THREAD: Note 8 Pro Megathread, FOR INFORMATION, THEN GO TO THE INSTRUCTIONS.

Instructions (antibrick):

First time installation:
  • Unlock your phone
  • Сonnect the phone to the PC
  • Backup your photos and other datas on PC
  • Reboot to Fastboot mode (vol- or vol+ with power button)
  • Download and unpack [FASTBOOT]CFW2_tool+TWRP.zip
  • Choose your device folder [begonia] or [begoniain]
  • Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux
    DO NOT MODIFY THIS SCRIPT, IF YOU DON'T WANT TO GET A BRICK!!!
    If something goes wrong, check if you have ADB drivers installed on Windows, or packages with fastboot on Linux.
    Will be flashed: Service Preloader, [CFW2] TWRP, CFW img's and etc., after which the phone will reboot into TWRP.
  • In TWRP click on Wipe menu and make:
    - Format Data
    - Wipe /system, /vendor, /cache
    (don't pay attention to failures in console logs)
  • Download and place the ROM to the internal memory of the phone, which should have already opened on the PC
    (I do not recommend SD cards, often phones fail because they turn out to be broken)
  • Click on Install menu and chose this ROM
  • Download and install others additions which you need: GAPPS for ARM64/10, Magisk and etc.
  • Reboot to system

TWRP installation/update:
  • Choose and download your device variant of service zip: [TWRP]begoniain-A10-CFW2_antibrick.zip (Indian) or [TWRP]begonia-A10-CFW2_antibrick.zip (for others versions) and place to the internal memory of the phone
  • Reboot to TWRP mode (vol+ with power button) then install service zip
    DO NOT MODIFY THIS ZIPs, IF YOU DON'T WANT TO GET A BRICK!!!
    Will be flashed: Service Preloader, [CFW4] TWRP, CFW img's and etc., then phone reboot into new TWRP
  • In main menu of TWRP click on Wipe menu and make:
    - Wipe System
  • - Wipe Vendor
  • - Wipe Cache
  • In main menu of TWRP click on Wipe menu and make:
    - Format Data
  • Reboot from TWRP into TWRP again
  • Download and place the ROM to the internal memory of the phone
    (I do not recommend SD cards, often phones fail because they turn out to be broken).
  • Click on Install menu and chose this ROM
  • Download and install GAPPS for ARM64/10 before first start
  • Reboot to system
  • Install Magisk (if you need) after first setup

Update installation:

USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!
  • Make backups.
  • Download and place the ROM to the internal memory of the phone
    (I do not recommend SD cards, often phones fail because they turn out to be broken)
  • Reboot in TWRP (vol+ with power button)
  • Click on Install menu and chose this ROM
  • After installation click on "Wipe Art/Dalvic" button
  • Reboot to system
  • If you have a bootloop, make Format Data in TWRP (all data will be erased).

Rollback to the factory firmware:
  • Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
  • Reboot to Fastboot mode (vol- or vol+ with power button)
  • Run flash_all.bat on Windows or flash_all.sh on Linux
    DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!

Sources:
ROM: https://github.com/crdroidandroid
Device: https://github.com/TTTT555/device_xiaomi_begonia
Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia

Known issues:
- Unstable NightMode
- Broken flashlite in trCam

Special thanks:

Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Device Telegram


Donate to new custom preloader development.

Donate to help crDroid team pay server costs.

XDA:DevDB Information
crDroid, ROM for the Redmi Note 8 Pro

Contributors
TTTT555
ROM OS Version: Android 10
Based On: LineageOS & POTATO project

Version Information
Status:
Nightly

Created 2020-06-29
Last Updated 2020-07-21
 

Attachments

  • Screenshot_20200629-184518.jpg
    Screenshot_20200629-184518.jpg
    179.4 KB · Views: 4,506
  • Screenshot_20200629-184536.jpg
    Screenshot_20200629-184536.jpg
    142.4 KB · Views: 4,445
  • Screenshot_20200629-184617.jpg
    Screenshot_20200629-184617.jpg
    121 KB · Views: 4,402
  • Screenshot_20200713-013423.jpg
    Screenshot_20200713-013423.jpg
    221.6 KB · Views: 3,817
  • Screenshot_20200713-013058.jpg
    Screenshot_20200713-013058.jpg
    142 KB · Views: 3,737
Last edited:

TTTT555

Member
May 31, 2018
48
57
Saint Petersburg
#6.14
All works finely in stock.
Do not need Magisk and stuff (best sound in stock).
Support only in Telegram: @crDroidBegonia
Migration from previous versions is possible only with the Format Data in TWRP (all data will be erased).
Need install GAPPS (opengaps pico/nano recomended) for trCam and G-Pay.

If you have any problems:
1) Install Opengapps ARM64/A10 (not flame, nik etc.)
2) Uninstall magisk, if you have it.
3) Check.
4) Reinstall ROM and only then look for help, if issue not gone.

Changelogs:

===== 26 January, 2021 =====

- 4.14.217 QuantumKiller-N kernel in stock [clang][almk]
- Fixed some location services issues
- Added non root Viper 4 Android FX
- Other minor fixes and additions

===== 20 January, 2021 =====

- Uprev to v.6.14 (many changes)
- AOSP jan's security patches
- 4.14.216 QuantumKiller-N kernel in stock [clang][almk]
- Fixed new G-pay issues
- Fixed fingerprint issues (PUBG graphics etc.)
- Fixed some 1080p60 videos (reverted Ista fix, install it manually, if you need)
- Other minor fixes and additions

===== 08 January, 2021 =====

Revert to stock blobs:
- Drop PE OSS blobs.
- Fixed some GPS issues.
- Fixed Wi-Fi signal issues.
- Fixed some LTE issues.
- Fixed Gralloc issues.
- Reducing battery discharge.
- Maybe something else.

===== 07 January, 2021 =====

System:
- AOSP december's security patches
- Merge with last PE device tree with my fixes for stable works
- 4.14.214 QuantumKiller-N kernel in stock [clang][almk]
- ZRAM tuning
- Added support of f2fs to fstab
- Added more sepolicy denials
- Other minor fixes and additions

Sound improovements (try new sound without any mods):
- Drop Redmi's DSPs with XiaomiParts
- Switch to MTK Helio DSP (drop offload sound)
- Take partial settings from NLsound mod by @Briclyaz
- Fix Call Recording & BT Echo

Camera:
- Fixed camera issues in Telegram & MS Teams
- ANX-Cam with 64 mpx in stock by @Aashil
- G-cam Tiger mod by @tommyhellatigr with buffer's fix by @Wyroczen in stock

Media:
- Added support for 3-button headset
- VSYNC tweaks
- Added Recorder app
- Fixed video issues in Instagram, WhatsApp etc.

Notes:
- Enable legacy mode in Viper
- Install CFW Stock preloader patch for best performance
- Uprev to CFW 2.0 for more compatible.
- Update [CFW] TWRP for decrypt Data (Keymaster 4.0 / Metadata - included in my CFW2.0_tools).
- You may download and install kernel with SLMK from Telegram group @crDroidBegonia.
- Use HDR++ mode in trCam and Night Mode when it prompted.
- Special thanks for @Maxait, @Doomhorg and others, who helped with tests.

===== 26 October, 2020 =====
- AOSP october's security patches
- Merge with PE device tree
- 4.14.202 QuantumKiller-N kernel in stock
- Uprev to CFW 2.1
- Safetynet fix for non-magisk phones
- Widevine L1 fix
- Battery overheating fix on charging
- Some addons for more smooth works
- Sepolicy fix for new "64mp fix magisk's module"
- Updated CFW preinstallation tools
- And other minor fixes and additions

P.S. If you have some bugs, try to switch
sepolicy to permissive (see in Telegram group).

===== 07 September, 2020 =====
- Fixed more sepolicy bugs
- Fixed cpu offline bugs after going to deepsleep
- Many kernel additions and uprev to 4.14.194+
- Add MTK Engineer Mode (non stable)
- Add XiaomiParts app
- Add init.d support
- Privapp permissions additions
- Switch to AOSP charger
- Many additions for media
- Updated CFW preinstallation tools
- And other minor fixes and additions

===== 09 August, 2020 =====
- Fixed more sepolicy bugs
- Fixed Goodix fingerprint issue
- Update APN's (fixed some IMS/Radio issues)
- Uprev to v.6.9 (with August Android patches)

===== 21 July, 2020 =====
- Added advanced display modes for cutout
- Fixed padding and rounding for default corners (including for other notch modes)
- Additional settings for volume buttons
- Fixed LED indication of charging
- Additional LED settings (enable "override" for better work)
- Additional operating modes of the cellular network
- Improvements for LightHAL
- MiSoundFX
- F-unlock
- Sepolicy = Enforce
- Fixed some crashes of voWiFi
- Fixed ANX Camera crash
- And other minor fixes and additions

===== 13 July, 2020 =====
- Initial crDroid 6.8
- July Security Patch
- Fix IMS for many carriers (as per user reports)
- Fix Night-light
- Fix statusbar height to match notch
- Upstream kernel to Linux 4.14.187
- Performance improvements
- Add Ambient display
- Add module for TTL
- Fix Call Recording
 
Last edited:

keiyrno

Member
Nov 21, 2015
19
1
HCE - Android cloud storage technology for card data, with temporary pay tokens on phone, used by G-Pay, etc.
There is also data storage inside the NFC chip - SE (secure element), which can also be used to store e-sim data

thank you for your explanation sir
 

gadmei.tw

Senior Member
Jan 12, 2016
147
46
@TTTT555
When using QS- "night light". The screen will flash at a fixed frequency, there seems to be some problems.?

anyway, advance THANKS, Its very very good Begonia ROM!:good::good:
 
Last edited:

e45cream

Member
Jan 15, 2009
8
0
I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.
 

TTTT555

Member
May 31, 2018
48
57
Saint Petersburg
Yes it is. Any way to fix that?
Later, but now you may off notice in /Settings/Security/Trust

@TTTT555 , did you disable the secure element due to the spiread_dma error?
nope, it is not related to this and will be fixed soon

I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.
you're out of luck, your phone is from a problematic series with a fingerprint for custom firmwares, but we are working on it
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn

    BEFORE YOU DO ANYTHING, PLEASE READ THIS THREAD: Note 8 Pro Megathread, FOR INFORMATION, THEN GO TO THE INSTRUCTIONS.

    Instructions (antibrick):

    First time installation:
    • Unlock your phone
    • Сonnect the phone to the PC
    • Backup your photos and other datas on PC
    • Reboot to Fastboot mode (vol- or vol+ with power button)
    • Download and unpack [FASTBOOT]CFW2_tool+TWRP.zip
    • Choose your device folder [begonia] or [begoniain]
    • Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux
      DO NOT MODIFY THIS SCRIPT, IF YOU DON'T WANT TO GET A BRICK!!!
      If something goes wrong, check if you have ADB drivers installed on Windows, or packages with fastboot on Linux.
      Will be flashed: Service Preloader, [CFW2] TWRP, CFW img's and etc., after which the phone will reboot into TWRP.
    • In TWRP click on Wipe menu and make:
      - Format Data
      - Wipe /system, /vendor, /cache
      (don't pay attention to failures in console logs)
    • Download and place the ROM to the internal memory of the phone, which should have already opened on the PC
      (I do not recommend SD cards, often phones fail because they turn out to be broken)
    • Click on Install menu and chose this ROM
    • Download and install others additions which you need: GAPPS for ARM64/10, Magisk and etc.
    • Reboot to system

    TWRP installation/update:
    • Choose and download your device variant of service zip: [TWRP]begoniain-A10-CFW2_antibrick.zip (Indian) or [TWRP]begonia-A10-CFW2_antibrick.zip (for others versions) and place to the internal memory of the phone
    • Reboot to TWRP mode (vol+ with power button) then install service zip
      DO NOT MODIFY THIS ZIPs, IF YOU DON'T WANT TO GET A BRICK!!!
      Will be flashed: Service Preloader, [CFW4] TWRP, CFW img's and etc., then phone reboot into new TWRP
    • In main menu of TWRP click on Wipe menu and make:
      - Wipe System
    • - Wipe Vendor
    • - Wipe Cache
    • In main menu of TWRP click on Wipe menu and make:
      - Format Data
    • Reboot from TWRP into TWRP again
    • Download and place the ROM to the internal memory of the phone
      (I do not recommend SD cards, often phones fail because they turn out to be broken).
    • Click on Install menu and chose this ROM
    • Download and install GAPPS for ARM64/10 before first start
    • Reboot to system
    • Install Magisk (if you need) after first setup

    Update installation:

    USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!
    • Make backups.
    • Download and place the ROM to the internal memory of the phone
      (I do not recommend SD cards, often phones fail because they turn out to be broken)
    • Reboot in TWRP (vol+ with power button)
    • Click on Install menu and chose this ROM
    • After installation click on "Wipe Art/Dalvic" button
    • Reboot to system
    • If you have a bootloop, make Format Data in TWRP (all data will be erased).

    Rollback to the factory firmware:
    • Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
    • Reboot to Fastboot mode (vol- or vol+ with power button)
    • Run flash_all.bat on Windows or flash_all.sh on Linux
      DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!

    Sources:
    ROM: https://github.com/crdroidandroid
    Device: https://github.com/TTTT555/device_xiaomi_begonia
    Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia

    Known issues:
    - Unstable NightMode
    - Broken flashlite in trCam

    Special thanks:

    Visit official website @ crDroid.net
    crDroid Community Telegram
    crDroid Device Telegram


    Donate to new custom preloader development.

    Donate to help crDroid team pay server costs.

    XDA:DevDB Information
    crDroid, ROM for the Redmi Note 8 Pro

    Contributors
    TTTT555
    ROM OS Version: Android 10
    Based On: LineageOS & POTATO project

    Version Information
    Status:
    Nightly

    Created 2020-06-29
    Last Updated 2020-07-21
    4
    Yes it is. Any way to fix that?
    Later, but now you may off notice in /Settings/Security/Trust

    @TTTT555 , did you disable the secure element due to the spiread_dma error?
    nope, it is not related to this and will be fixed soon

    I'm also having lots of reboots with the fingerprint sensor. Looks like it's much slower than the standard one, and you need to keep your finger still for much longer.
    you're out of luck, your phone is from a problematic series with a fingerprint for custom firmwares, but we are working on it
    3
    Sir,
    what is HCE mode?

    HCE - Android cloud storage technology for card data, with temporary pay tokens on phone, used by G-Pay, etc.
    There is also data storage inside the NFC chip - SE (secure element), which can also be used to store e-sim data
    2
    #6.14
    All works finely in stock.
    Do not need Magisk and stuff (best sound in stock).
    Support only in Telegram: @crDroidBegonia
    Migration from previous versions is possible only with the Format Data in TWRP (all data will be erased).
    Need install GAPPS (opengaps pico/nano recomended) for trCam and G-Pay.

    If you have any problems:
    1) Install Opengapps ARM64/A10 (not flame, nik etc.)
    2) Uninstall magisk, if you have it.
    3) Check.
    4) Reinstall ROM and only then look for help, if issue not gone.

    Changelogs:

    ===== 26 January, 2021 =====

    - 4.14.217 QuantumKiller-N kernel in stock [clang][almk]
    - Fixed some location services issues
    - Added non root Viper 4 Android FX
    - Other minor fixes and additions

    ===== 20 January, 2021 =====

    - Uprev to v.6.14 (many changes)
    - AOSP jan's security patches
    - 4.14.216 QuantumKiller-N kernel in stock [clang][almk]
    - Fixed new G-pay issues
    - Fixed fingerprint issues (PUBG graphics etc.)
    - Fixed some 1080p60 videos (reverted Ista fix, install it manually, if you need)
    - Other minor fixes and additions

    ===== 08 January, 2021 =====

    Revert to stock blobs:
    - Drop PE OSS blobs.
    - Fixed some GPS issues.
    - Fixed Wi-Fi signal issues.
    - Fixed some LTE issues.
    - Fixed Gralloc issues.
    - Reducing battery discharge.
    - Maybe something else.

    ===== 07 January, 2021 =====

    System:
    - AOSP december's security patches
    - Merge with last PE device tree with my fixes for stable works
    - 4.14.214 QuantumKiller-N kernel in stock [clang][almk]
    - ZRAM tuning
    - Added support of f2fs to fstab
    - Added more sepolicy denials
    - Other minor fixes and additions

    Sound improovements (try new sound without any mods):
    - Drop Redmi's DSPs with XiaomiParts
    - Switch to MTK Helio DSP (drop offload sound)
    - Take partial settings from NLsound mod by @Briclyaz
    - Fix Call Recording & BT Echo

    Camera:
    - Fixed camera issues in Telegram & MS Teams
    - ANX-Cam with 64 mpx in stock by @Aashil
    - G-cam Tiger mod by @tommyhellatigr with buffer's fix by @Wyroczen in stock

    Media:
    - Added support for 3-button headset
    - VSYNC tweaks
    - Added Recorder app
    - Fixed video issues in Instagram, WhatsApp etc.

    Notes:
    - Enable legacy mode in Viper
    - Install CFW Stock preloader patch for best performance
    - Uprev to CFW 2.0 for more compatible.
    - Update [CFW] TWRP for decrypt Data (Keymaster 4.0 / Metadata - included in my CFW2.0_tools).
    - You may download and install kernel with SLMK from Telegram group @crDroidBegonia.
    - Use HDR++ mode in trCam and Night Mode when it prompted.
    - Special thanks for @Maxait, @Doomhorg and others, who helped with tests.

    ===== 26 October, 2020 =====
    - AOSP october's security patches
    - Merge with PE device tree
    - 4.14.202 QuantumKiller-N kernel in stock
    - Uprev to CFW 2.1
    - Safetynet fix for non-magisk phones
    - Widevine L1 fix
    - Battery overheating fix on charging
    - Some addons for more smooth works
    - Sepolicy fix for new "64mp fix magisk's module"
    - Updated CFW preinstallation tools
    - And other minor fixes and additions

    P.S. If you have some bugs, try to switch
    sepolicy to permissive (see in Telegram group).

    ===== 07 September, 2020 =====
    - Fixed more sepolicy bugs
    - Fixed cpu offline bugs after going to deepsleep
    - Many kernel additions and uprev to 4.14.194+
    - Add MTK Engineer Mode (non stable)
    - Add XiaomiParts app
    - Add init.d support
    - Privapp permissions additions
    - Switch to AOSP charger
    - Many additions for media
    - Updated CFW preinstallation tools
    - And other minor fixes and additions

    ===== 09 August, 2020 =====
    - Fixed more sepolicy bugs
    - Fixed Goodix fingerprint issue
    - Update APN's (fixed some IMS/Radio issues)
    - Uprev to v.6.9 (with August Android patches)

    ===== 21 July, 2020 =====
    - Added advanced display modes for cutout
    - Fixed padding and rounding for default corners (including for other notch modes)
    - Additional settings for volume buttons
    - Fixed LED indication of charging
    - Additional LED settings (enable "override" for better work)
    - Additional operating modes of the cellular network
    - Improvements for LightHAL
    - MiSoundFX
    - F-unlock
    - Sepolicy = Enforce
    - Fixed some crashes of voWiFi
    - Fixed ANX Camera crash
    - And other minor fixes and additions

    ===== 13 July, 2020 =====
    - Initial crDroid 6.8
    - July Security Patch
    - Fix IMS for many carriers (as per user reports)
    - Fix Night-light
    - Fix statusbar height to match notch
    - Upstream kernel to Linux 4.14.187
    - Performance improvements
    - Add Ambient display
    - Add module for TTL
    - Fix Call Recording
    2
    great rom! but this bug with the phone calls over bluetooth, is having problems with echo voice

    You may use this patch, but it brokes callrecording.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone