• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][CFW][11] crDroid 7.x [begonia/begoniain][OFFICIAL][ANTIBRICK]

Search This thread
btw,i am in miui 10.4.9 + magisk + old twrp, may i know summay steps to flash into this rom + root + magisk hide working for detected root banking app?
I can't say anything for your Banking app problem actually... And I'm sure u know that the full guide for flashing this rom is give in the main post.
Thread '[ROM][CFW][11] crDroid 7.x [begonia/begoniain][OFFICIAL][ANTIBRICK]' https://forum.xda-developers.com/t/...begonia-begoniain-official-antibrick.4217941/
Please, feel free to see it yourself. Although, I wouldn't recommend this rom for right now as this is an old system for rom flash....The CFW rom period is almost done for.. Non-CFW Roms are out there. Also, flashing with this method is hard for sure as your a newcomer to this anyway..
If you donno what CFW is then read the Megathread. U need to read all of the first 3 threads in the post. Otherwise you won't understand what CFW is and how it works.
 
  • Like
Reactions: stanley87

stanley87

Member
Mar 8, 2011
11
1
I can't say anything for your Banking app problem actually... And I'm sure u know that the full guide for flashing this rom is give in the main post.
Thread '[ROM][CFW][11] crDroid 7.x [begonia/begoniain][OFFICIAL][ANTIBRICK]' https://forum.xda-developers.com/t/...begonia-begoniain-official-antibrick.4217941/
Please, feel free to see it yourself. Although, I wouldn't recommend this rom for right now as this is an old system for rom flash....The CFW rom period is almost done for.. Non-CFW Roms are out there. Also, flashing with this method is hard for sure as your a newcomer to this anyway..
If you donno what CFW is then read the Megathread. U need to read all of the first 3 threads in the post. Otherwise you won't understand what CFW is and how it works.
Thanks for references,my side have been go through those posts,my side try to combine to correcy way + the references post guidelines provided by you by modified part migration steps directly,jz need your advice for your rom to slot into the steps directly

CFW Migration Steps

Coming from MIUI

Method 1
- Downgrade to MIUI Android 9 if not already, or try using Method 2 (my side already in android 9 miu roms (10.4.9.0(PGGCNXM)),go to next steps)
- Flash preloader and lk as mentioned in first post (start with this as step 1 for my side)
- Flash any non-CFW Android 9 recovery (flash back old twrp non-cfm recovery)
- Boot into recovery (follow & continue)
- Wipe system, cache, dalvik (follow & continue)
- Flash CFW, CFW compatible ROM (this is the part to join in your 1st instruction step --->> Download and unpack [FASTBOOT]CFW4_tool+TWRP.zip ??? or my side need to flash Android 11 (CFWv4) or Android 11 (CFWv3+vendor) 1st then only go back to your download & unpack steps???

Thanks in advance if your side can help clarified this again
 
Last edited:
- Flash CFW, CFW compatible ROM (this is the part to join in your 1st instruction step --->> Download and unpack [FASTBOOT]CFW4_tool+TWRP.zip ??? or my side need to flash Android 11 (CFWv4) or Android 11 (CFWv3+vendor) 1st then only go back to your download & unpack steps???
Yes, you just need to do the CFW4_tool+TWRP.zip part... that's all. CrDroid 7.x supports CFW4 only. Vendor is included in the rom.
 
  • Like
Reactions: stanley87

maxman1695

Member
Jul 16, 2017
16
2
I have also problems with banking app. Can't use it. Also i have little performance issues with the phone - not really fast sometimes.... Can anybody help?
 

sinho_robo

Senior Member
Sep 5, 2012
54
8
One of the users above replied that this ROM is still being maintained, but looking at the crdroid website, the ROM to Note 8 Pro is one of the very few that are still version 7.2 while the most current version is 7.4 released on March 10...
 

maxman1695

Member
Jul 16, 2017
16
2
One of the users above replied that this ROM is still being maintained, but looking at the crdroid website, the ROM to Note 8 Pro is one of the very few that are still version 7.2 while the most current version is 7.4 released on March 10...
Yeah i said it. Its a little bit strange. Problems are still Here, i Hope for Update.
 

gadmei.tw

Senior Member
Jan 12, 2016
151
46
Yesterday, I tried to install the built-in camera snap of AOSP for begonia to use, and found it is simpler and easier to use than trcamera, and the photo quality is also quite good, for your reference.
 

Attachments

  • Snap.zip
    5.1 MB · Views: 12

lampjese

New member
May 3, 2020
4
0
Hello, i installed this rom a weak ago so far i was happy with it.
Removed the sound modifcations and camera apps and installed gcam and viper.
But this weekend i tried android auto and it is not workig for me.
When you connect to usb system ui locks up and crashes.
 
Last edited:

Marc53

Member
Jun 5, 2018
26
0
Hi all,
I have a Redmi Note 8 Pro which i would like to install a custom Ron on, iets on the latest stock rom, can i Just start the bat file and expect to succeed?
 

caravaggio971

Senior Member
Aug 26, 2011
91
8
Did it for the first time yesterday. It is easy. Just download the file and launch the bat file with your phone in fastboot mode. It works.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    BE3pE0l.png


    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned


    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today


    Features:
    https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn

    BEFORE YOU DO ANYTHING, PLEASE READ THIS THREAD: Note 8 Pro Megathread, FOR INFORMATION, THEN GO TO THE INSTRUCTIONS.

    Instructions (antibrick):

    First time installation:
    • Unlock your phone
    • Сonnect the phone to the PC
    • Backup your photos and other datas on PC
    • Reboot to Fastboot mode (vol- or vol+ with power button)
    • Download and unpack [FASTBOOT]CFW4_tool+TWRP.zip
    • Choose your device folder [begonia] or [begoniain]
    • Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux
      DO NOT MODIFY THIS SCRIPT, IF YOU DON'T WANT TO GET A BRICK!!!
      If something goes wrong, check if you have ADB drivers installed on Windows, or packages with fastboot on Linux.
      Will be flashed: Service Preloader, [CFW4] TWRP, CFW img's and etc., after which the phone will reboot into TWRP.
    • In TWRP click on Wipe menu and make:
      - Format Data
      - Wipe /system, /vendor, /cache
      (don't pay attention to failures in console logs)
    • Download and place the ROM to the internal memory of the phone, which should have already opened on the PC
      (I do not recommend SD cards, often phones fail because they turn out to be broken)
    • Click on Install menu and chose this ROM
    • Download and install others additions which you need: GAPPS for ARM64/11, Magisk and etc.
    • Reboot to system

    TWRP installation/update:
    • Choose and download your device variant of service zip: [TWRP]begoniain-A11-CFW4_antibrick.zip (Indian) or [TWRP]begonia-A11-CFW4_antibrick.zip (for others versions) and place to the internal memory of the phone
    • Reboot to TWRP mode (vol+ with power button) then install service zip
      DO NOT MODIFY THIS ZIPs, IF YOU DON'T WANT TO GET A BRICK!!!
      Will be flashed: Service Preloader, [CFW4] TWRP, CFW img's and etc., then phone reboot into new TWRP
    • In main menu of TWRP click on Wipe menu and make:
      - Wipe System
    • - Wipe Vendor
    • - Wipe Cache
    • In main menu of TWRP click on Wipe menu and make:
      - Format Data
    • Reboot from TWRP into TWRP again
    • Download and place the ROM to the internal memory of the phone
      (I do not recommend SD cards, often phones fail because they turn out to be broken).
    • Click on Install menu and chose this ROM
    • Download and install GAPPS for ARM64/11 before first start
    • Reboot to system
    • Install Magisk (if you need) after first setup

    Update installation:

    USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!
    • Make backups.
    • Download and place the ROM to the internal memory of the phone
      (I do not recommend SD cards, often phones fail because they turn out to be broken)
    • Reboot in TWRP (vol+ with power button)
    • Click on Install menu and chose this ROM
    • After installation click on "Wipe Art/Dalvic" button
    • Reboot to system
    • If you have a bootloop, make Format Data in TWRP (all data will be erased).

    Rollback to the factory firmware:
    • Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
    • Reboot to Fastboot mode (vol- or vol+ with power button)
    • Run flash_all.bat on Windows or flash_all.sh on Linux
      DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!

    Sources:
    ROM: https://github.com/crdroidandroid
    Device: https://github.com/TTTT555/device_xiaomi_begonia
    Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia

    Known issues:
    - Unstable NightMode
    - Broken flashlite in trCam
    - Sepolicy permissive

    Special thanks:

    Visit official website @ crDroid.net
    crDroid Community Telegram
    crDroid Device Telegram
    crDroid Device Telegram RU zone
    My Telegram

    Donate to new custom preloader development.

    Donate to help crDroid team pay server costs.

    XDA:DevDB Information
    crDroid, ROM for the Redmi Note 8 Pro

    Contributors

    TTTT555
    ROM OS Version: Android 11
    Based On: LineageOS & POTATO project

    Version Information
    Status:
    Nightly
    2
    #7.2
    All works finely in stock.
    Do not need Viper, Dolby and other sound stuff (best sound in stock).
    Support only in Telegram: @crDroidBegonia
    Migration from previous versions is possible only with the Format Data in TWRP (all data will be erased).
    Need install GAPPS (opengaps pico/nano recomended) for trCam and G-Pay.
    Need Magisk with HIDE option for Google apps to pass safetynet check.

    If you have any problems:
    1) Install Opengapps ARM64/A11 (not flame, nik etc.)
    2) Check.
    3) Reinstall ROM and only then look for help, if issue not gone.

    New TWRP packed with CFW4.0 tools, or take here (DON'T UPDATE IT IF YOU ARE NOT ON CFW, OTHERWISE BRICK - go to First Install Instruction).

    Changelogs:

    ===== 14 January, 2021 =====

    - Merging device trees of cRdroid 6.13 and POSP A11
    - 4.14.215 QuantumKiller-N kernel in stock [clang][almk]
    - Disable AOSP serial console notification
    - New SafetyNet tweaks (use Magisk with Hide option)
    - Other minor fixes and additions

    Notes:
    - Cams and sound same as on v.6.13
    - GAPPS - use only Opengapps A11 (ARM64 pico or nano for OK Google).
    - Uprev to CFW 4.0 for more compatible.
    - Update [CFW] TWRP for decrypt Data (Keymaster 4.0 / Metadata - also included in my CFW4.0_tools).
    - You may download and install kernel with SLMK from Telegram group @crDroidBegonia.
    - Use HDR++ mode in trCam and Night Mode when it prompted.
    - Many bugs can only be fixed by building a new universal custom preloader.
    You can donate to unbricks for my phone during development preloader here:
    Paypal: https://www.paypal.me/brickonia
    Yoomoney (RU): https://yoomoney.ru/to/410013569744664

    ===== 07 January, 2021 =====

    System:
    - AOSP december's security patches
    - Merge with last PE device tree with my fixes for stable works
    - 4.14.214 QuantumKiller-N kernel in stock [clang][almk]
    - ZRAM tuning
    - Added support of f2fs to fstab
    - Added more sepolicy denials
    - Other minor fixes and additions

    Sound improovements (try new sound without any mods):
    - Drop Redmi's DSPs with XiaomiParts
    - Switch to MTK Helio DSP (drop offload sound)
    - Take partial settings from NLsound mod by @Briclyaz
    - Fix Call Recording & BT Echo

    Camera:
    - Fixed camera issues in Telegram & MS Teams
    - ANX-Cam with 64 mpx in stock by @Aashil
    - G-cam Tiger mod by @tommyhellatigr with buffer's fix by @Wyroczen in stock

    Media:
    - Added support for 3-button headset
    - VSYNC tweaks
    - Added Recorder app
    - Fixed video issues in Instagram, WhatsApp etc.

    ===== 26 October, 2020 =====
    - AOSP october's security patches
    - Merge with PE device tree
    - 4.14.202 QuantumKiller-N kernel in stock
    - Uprev to CFW 2.1
    - Safetynet fix for non-magisk phones
    - Widevine L1 fix
    - Battery overheating fix on charging
    - Some addons for more smooth works
    - Sepolicy fix for new "64mp fix magisk's module"
    - Updated CFW preinstallation tools
    - And other minor fixes and additions

    P.S. If you have some bugs, try to switch
    sepolicy to permissive (see in Telegram group).

    ===== 07 September, 2020 =====
    - Fixed more sepolicy bugs
    - Fixed cpu offline bugs after going to deepsleep
    - Many kernel additions and uprev to 4.14.194+
    - Add MTK Engineer Mode (non stable)
    - Add XiaomiParts app
    - Add init.d support
    - Privapp permissions additions
    - Switch to AOSP charger
    - Many additions for media
    - Updated CFW preinstallation tools
    - And other minor fixes and additions

    ===== 09 August, 2020 =====
    - Fixed more sepolicy bugs
    - Fixed Goodix fingerprint issue
    - Update APN's (fixed some IMS/Radio issues)
    - Uprev to v.6.9 (with August Android patches)

    ===== 21 July, 2020 =====
    - Added advanced display modes for cutout
    - Fixed padding and rounding for default corners (including for other notch modes)
    - Additional settings for volume buttons
    - Fixed LED indication of charging
    - Additional LED settings (enable "override" for better work)
    - Additional operating modes of the cellular network
    - Improvements for LightHAL
    - MiSoundFX
    - F-unlock
    - Sepolicy = Enforce
    - Fixed some crashes of voWiFi
    - Fixed ANX Camera crash
    - And other minor fixes and additions

    ===== 13 July, 2020 =====
    - Initial crDroid 6.8
    - July Security Patch
    - Fix IMS for many carriers (as per user reports)
    - Fix Night-light
    - Fix statusbar height to match notch
    - Upstream kernel to Linux 4.14.187
    - Performance improvements
    - Add Ambient display
    - Add module for TTL
    - Fix Call Recording
    2
    I'm waiting the version for non-cfw 👀
    Same here🥲
    2
    The flashing procedure for this ROM is quite different to the others with the inclusion of flashing that antibrick.zip archive.

    I thought the antibrick procedure is meant for first time flashing CFW custom ROMs (From non-CFW to CFW supported recovery).

    Since you were already in CFW supported recovery, you just flash CFW v4 (VNDK30) from here then continue flashing the ROM and do the other procedures.
    1
    Hi all, anyone using this as their daily driver? Keen to hear how is going. Thanks