[rom changelogs] [CyanogenMod 12.1 ] Jiayu s3( MT6752) & Jiayu s3 + (MT6753) ]

[jpstanan]

Someone made this boot.IMG with RC5 stuff for fastcharge, no idea who...

https://drive.google.com/file/d/0B_VqQAje0irIVlhUYllBdHlYaDg/view?usp=docslist_api

Also he said if you put this file in system/etc/init.d you can enable it.

https://www.dropbox.com/s/699oweqt54ex16r/01fastcharge?dl=0

Well he was a nice guy.
But don't forget to thank the original developers of this stuff.

Sent from my S3 using Tapatalk

---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------


You have S3+? If so, its meant for S3 (MT6752) only.

Sent from my S3 using Tapatalk

Hi there!
Regarding fast charge procedure: Flashiing this image, we only choose boot, right?
Where do we find the fast charge options after doing this?

I'm a little lost here...

 

[symbios1]

Hi. Link of build2 is off.

 

[jpstanan]

Two things :wifi starts slower than on rc;when switching feom 4G to 3g everything fine, but when switching again to 4G a reboot is needed to have signal.

Enviado do meu S3 através de Tapatalk

 

[Dani551]

Hi there!
Regarding fast charge procedure: Flashiing this image, we only choose boot, right?
Where do we find the fast charge options after doing this?

I'm a little lost here...

Yes, you flash the image as boot
And there is no explicit GUI option, the way that you can set it to fast charge is by copying the script file to the directory, /system/etc/init.d/" and changing the permissions to 755 (chmod 755 /system/etc/init.d/*), then simply reboot your device and you shall have fast charge set at 1.7A on AC and 500mA on USB)

Sent from my S3 using Tapatalk

 

[sedj01]

WhatsApp not sending for me, anyone else?

Sent from my S3 using Tapatalk

Edit: sorted re installed from play, was using a older titanium backup

 

[genesisalgor]

Yes, you flash the image as boot
And there is no explicit GUI option, the way that you can set it to fast charge is by copying the script file to the directory, /system/etc/init.d/" and changing the permissions to 755 (chmod 755 /system/etc/init.d/*), then simply reboot your device and you shall have fast charge set at 1.7A on AC and 500mA on USB)

Sent from my S3 using Tapatalk

Yeah, and in the init.d script file you can set the charge amout that you want, respecting the max and the min.

Sent from my S3 using Tapatalk

 

[jpstanan]

Thak you both, i did put it to charge after and it was... fast, so something must have been done. ?

Enviado do meu S3 através de Tapatalk

 

[Atreidamenelao]

Hello

I can not enter engineer mode, or with codes or with mobile uncle tools, or other app.

Any solution?

 

[poganytamas]

Hello

I can not enter engineer mode, or with codes or with mobile uncle tools, or other app.

Any solution?

Cyanogenmod doesn't have MTK specific parts, like alarm when the phone is turned off, or the MTK engineering menu. Only factory roms have that.

 

[Atreidamenelao]

Hello
Thanks for the reply.

It is possible to engineer mode CM12.1 when you have other custom rom? For example before he had a Lenovo A820 with a custom rom android KK for the Spanish forum "movilesdualsim" and engineer mode worked perfectly.

Thanks and best regards

 

[Dani551]

Hello
Thanks for the reply.

It is possible to engineer mode CM12.1 when you have other custom rom? For example before he had a Lenovo A820 with a custom rom android KK for the Spanish forum "movilesdualsim" and engineer mode worked perfectly.

Thanks and best regards

Nobody has been able to get Engineering Mode working smoothly on CM12.1 as var as far as I know

Sent from my S3 using Tapatalk

 

[misterrui]

Hello,
So, I am trying to implement fast charge. I had already flash the boot image and copy the init.d file to the specific folder. Now what do I need to do to complete the procedure?
Thanks

 

[hohassan444]

Someone made this boot.IMG with RC5 stuff for fastcharge, no idea who...

https://drive.google.com/file/d/0B_VqQAje0irIVlhUYllBdHlYaDg/view?usp=docslist_api

Also he said if you put this file in system/etc/init.d you can enable it.

https://www.dropbox.com/s/699oweqt54ex16r/01fastcharge?dl=0

Well he was a nice guy.
But don't forget to thank the original developers of this stuff.

Sent from my S3 using Tapatalk

---------- Post added at 08:59 PM ---------- Previous post was at 08:54 PM ----------


You have S3+? If so, its meant for S3 (MT6752) only.

Sent from my S3 using Tapatalk

thanks...but not working for me ?

 

[genesisalgor]

thanks...but not working for me ?

Remove the ".txt" extension in the end of Fastcharge init.d archive, then give proper permission. rwxrxr

Sent from my s3 using Tapatalk

 

[hohassan444]

Remove the ".txt" extension in the end of Fastcharge init.d archive, then give proper permission. rwxrxr

Sent from my s3 using Tapatalk

but there is no ".txt" extension in the end of Fastcharge "....pleaaaaaaaaase can you upload the proper file ?.

 

[Dani551]

but there is no ".txt" extension in the end of Fastcharge "....pleaaaaaaaaase can you upload the proper file ?.

It is the proper file and there is no need to rename or cut the extension. Use the file as is and you shall be all good. ☺

Sent from my JY-S3 using Tapatalk

 

[hohassan444]

It is the proper file and there is no need to rename or cut the extension. Use the file as is and you shall be all good.

Sent from my JY-S3 using Tapatalk

thanks but i tried several times..give 755 permission...no luck...the charging is still slow.did you try it ?.

 

[Dior DNA]

thanks but i tried several times..give 755 permission...no luck...the charging is still slow.did you try it ?.

Does directory /sys/kernel/charge_levels exist?
if so : can you show content of 3 files charge_level_ac charge_level_usb quick_charge_enable
the script should have set them to 1700 700 1
if those are your values then script worked and maybe the issue is with the charger.
(personally I do not have a charger to go faster so I go slow)

 

[Dani551]

thanks but i tried several times..give 755 permission...no luck...the charging is still slow.did you try it ?.

In the script file the USB charge is set to 500, change it to 700 with any text editor and copy it to /etc/init.d folder like @diordna said
Then give it the correct permissions, reboot!
But none of this will work of you didn't flash the correct boot.IMG
And yes, I did try it and it worked for me perfectly

Sent from my JY-S3 using Tapatalk

 

[hohassan444]

In the script file the USB charge is set to 500, change it to 700 with any text editor and copy it to /etc/init.d folder like @diordna said
Then give it the correct permissions, reboot!
But none of this will work of you didn't flash the correct boot.IMG
And yes, I did try it and it worked for me perfectly

Sent from my JY-S3 using Tapatalk

what do you mean by correct boot.img ?...RC5 boot.img ?

thanks in advance