[ROM] CM 11.0 (Android 4.4) for RazrHD XT925/XT926

Search This thread
By:
Advanced…
epinter

epinter

Inactive Recognized Developer
Feb 26, 2011
906
7,347
Sao Paulo
www.linuxmobile.org
This is a CM11.0 (KitKat, Android 4.4) ROM for Razr HD.

I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
Click to expand...
Click to collapse

This rom requires an unlocked bootloader. Recent versions (July/2014) requires an updated (KitKat) bootloader

DEVELOPERS (razrqcom-dev-team):
EPinter - Kernel Development, Build Setup, XT925 & MB886 Support
DHacker - Kernel Development, Build Setup, XT926 Support
Hashcode - Kernel Development, Build Setup, XT926 Support
Nadlabak - Kernel Development, Build Setup, XT897 Support
Skrilax_CZ - Kernel Development, Build Setup, XT897 Support


Download links and information about what is working can be found on the website:
https://sites.google.com/site/linuxmobileorg/razrhd/cm11

Instructions:
Download the zip (cm-11-*-UNOFFICIAL-epinter-xt*.zip) and copy to your sdcard.
Boot into recovery.
Backup your firmware and data!
Format /system.
Install the firmware (install zip from...).
Install gapps (install zip from...).
Wipe data/cache
Reboot.

Developers builds:
Epinter: http://goo.im/devs/epinter
DHacker: http://androidhosting.org/Devs/Dhacker29/


An updated CMW recovery version is required, download:
http://www.clockworkmod.com/rommanager/

Gapps:
http://wiki.cyanogenmod.org/w/Google_Apps


2014-08-02
Everyone with JellyBean firmware/bootloader should use moto_msm8960_jbbl builds. Users who updated to KitKat firmware/bootloader need to use the moto_msm8960 builds.

2014-07-07
The ROM is being updated to kernel version 3.4, that was already released to RazrM and for XT926. The kernel 3.4 depends on new bootloader version and XT925 doesn't have it yet (a leak exists, you can search xda).

As Nadlabak and dhacker29 already informed, the M8 will be the last release supporting devices with JB bootloader. All nightly builds will support only new bootloader.
Click to expand...
Click to collapse

Sources:
https://github.com/razrqcom-dev-team
https://github.com/CyanogenMod
 
Last edited:
  • Like
Reactions: fredsky2, serguai59, marknoll and 53 others
W

wrsmega

Senior Member
Mar 5, 2012
82
116
Gonna try flashing this on AHD. hopefully it works

EDIT: Rejected.
 
Last edited:
madmonkey57

madmonkey57

Senior Member
Oct 21, 2012
735
340
OK. So far so good. Flashed with no issue, neither the rom nor the gapps.
Very smooth. WIFI and radio signals look OK. Downloading all my apps...

After 5mn of testing (!):

- My external SD isn't detected.
- Same transition bug as in a few builds earlier on cm10.2

EDIT:
- All Interface/Menus/Status bar settings are missing
- Some settings are missing from the Camera app (jpeg quality and others)

EDIT2: 20 minutes
No other bug so far. Tested a few apps, are working as expected.
root is OK.
And s**t, that thing is REALLY snappy!.
 
Last edited:
  • Like
Reactions: GeraBast and JoseBerga
gmartxda

gmartxda

Member
Jan 5, 2012
47
10
puebla
Hi,
I made a dirty flash.
XT925 (Telcel Mexico)
I was in Carbon nightlies (7.11.13)
Flash ROM over Carbon (CWM 6.0.4.4)
Flash GAPP 4.4
Erase Cache, Erase Dalvik
Boot

Boot without Problems alle Apps working
(Around 70 apps, from whatsapp bbm, rootexplorer, udn lite, asphalt 8,etc)
SD Card not mounted/working
Radio signal works ,WiFi, battery is ok )
GPS locks quickly.

From Carbon have the unlock function with volume keys, that works too. I did not find it in CM, but works.
I flashed superuser.

Till now all is working great. No FC.


Sent from my XT925 using xda app-developers app
 
F

flight666

Senior Member
Mar 10, 2012
63
17
Sao Paulo - Brazil
Hi guys,

Just flashed here and I´m still testing... Used CWM 6.0.4.4 without any glitches. Flashed Core GAPPS , the minimal one (17mb) with only core code. I also flashed SuperSU 1.6.5 as I don´t like Superuser.

It´s working like a charm!

I didn´t like the launcher, so I exchanged to Nova Laucher as I always used it.

Anomalies found:

- External SDCard doesn´t work.
- Tiles for Radios/GPS/Bluetooth on notification screen doesn´t work to switch the function on-off. It just leads to config screen.
- Sound poping/cracking playing FLAC files. Tried Apollo and PlayerPro. I don´t have any MP3 local to test, will try later. But working flawless with streaming sound. I used 8Track and Cloudaround and the sound is perfect.

Oh, just FYI Viper4Android is working flawlessly without any issue! :)

For a "first build", it´s almost perfect, just few bugs. Epinter, congratulations!

I´ll test GPS and Bluetooth Audio on car as soon as I´m out for lunch. ;)
 
  • Like
Reactions: GeraBast
EcHoFiiVe

EcHoFiiVe

Senior Member
Jan 29, 2012
1,575
737
Mundelein. IL
Tested this. Works great on my Atrix HD. Video playback and external SD seem to be the only bugs for me. Found myself a new daily driver for now.

Sent from my XT925 using xda app-developers app
 
CesarRamina

CesarRamina

Senior Member
Mar 15, 2011
116
21
No tethering
No GPS
A lot of menu options off
Some 3G lost signals
SMS and MMS ok

It's ok for a preview.
 
F

flight666

Senior Member
Mar 10, 2012
63
17
Sao Paulo - Brazil
EcHoFiiVe said:
Tested this. Works great on my Atrix HD. Video playback and external SD seem to be the only bugs for me. Found myself a new daily driver for now.

Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse

I didn't try video playback yet, I'll check it!

For me too, can be a daily driver as it is now!

---------- Post added at 05:23 PM ---------- Previous post was at 05:20 PM ----------
CesarRamina said:
No tethering
No GPS
A lot of menu options off
Some 3G lost signals
SMS and MMS ok

It's ok for a preview.
Click to expand...
Click to collapse

Mate, GPS is wonderful here! Locking less than 5 seconds. Even inside my apartment when usually is lazy to lock sinal!

I also tested bluetooth audio and is working fine.

I'll test tethering.
 
F

flight666

Senior Member
Mar 10, 2012
63
17
Sao Paulo - Brazil
CesarRamina said:
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.
Click to expand...
Click to collapse

Now GPS is normal? If not, try restore a backup where it locks, reboot with it locked then clean flash KK, might work.

I think white status bar icons are a feature of KK, not a bug. It won't go blue as previous versions. Check if your playstore is connecting and your Google account is syncing normal, it's all set.

Tethering is down. Might not been implemented yet.

I checked video recording is working fine so local video playback, using mx player. But streaming video from YouTube app or any other site from web is not working.

And lock screen rotation too, may not be present yet.

Any other feature is awesome.
 
  • Like
Reactions: GeraBast
CesarRamina

CesarRamina

Senior Member
Mar 15, 2011
116
21
flight666 said:
Now GPS is normal? If not, try restore a backup where it locks, reboot with it locked then clean flash KK, might work.

I think white status bar icons are a feature of KK, not a bug. It won't go blue as previous versions. Check if your playstore is connecting and your Google account is syncing normal, it's all set.

Tethering is down. Might not been implemented yet.

I checked video recording is working fine so local video playback, using mx player. But streaming video from YouTube app or any other site from web is not working.

And lock screen rotation too, may not be present yet.

Any other feature is awesome.
Click to expand...
Click to collapse

Tks.
I know there is some bugs, and CM 11 almost is ok.

But something very wrong happened. I lost wifi. Not turn on. No connection anymore. I put sotck system by rsdlite, but even that, wifi not turn back. WIFI-AP not turn on too. I think it burned. Is there some way to test if really burned?
Tks again.
 
Last edited:
You must log in or register to reply here.

Similar threads

epinter
[ROM] CM 10.1 (Android 4.2) for RazrHD XT925/XT926
Replies
2K
Views
352K
C
Cpudan80
epinter
[ROM] CM 10.2 (Android 4.3) for RazrHD XT925/XT926
Replies
1K
Views
265K
M
mitsus
CWGSM3VO
  • Poll
[ROM] CM 12.x (Android 5.x) for moto_msm8960 A-family KKBL/JBBL
Replies
5K
Views
413K
J
jerryspring
Pzyduck
RAZR HD XT925 Firmwares SuperThread (Jelly Bean)
Replies
628
Views
252K
rahimali
rahimali
CarbonROM
  • Locked
[ROM][AOSP] [Nightly/Release] CarbonRom JB [XT925/XT926]
Replies
1K
Views
132K
Clark Joseph Kent
Clark Joseph Kent

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 56
    epinter
    epinter
    This is a CM11.0 (KitKat, Android 4.4) ROM for Razr HD.

    I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
    Click to expand...
    Click to collapse

    This rom requires an unlocked bootloader. Recent versions (July/2014) requires an updated (KitKat) bootloader

    DEVELOPERS (razrqcom-dev-team):
    EPinter - Kernel Development, Build Setup, XT925 & MB886 Support
    DHacker - Kernel Development, Build Setup, XT926 Support
    Hashcode - Kernel Development, Build Setup, XT926 Support
    Nadlabak - Kernel Development, Build Setup, XT897 Support
    Skrilax_CZ - Kernel Development, Build Setup, XT897 Support


    Download links and information about what is working can be found on the website:
    https://sites.google.com/site/linuxmobileorg/razrhd/cm11

    Instructions:
    Download the zip (cm-11-*-UNOFFICIAL-epinter-xt*.zip) and copy to your sdcard.
    Boot into recovery.
    Backup your firmware and data!
    Format /system.
    Install the firmware (install zip from...).
    Install gapps (install zip from...).
    Wipe data/cache
    Reboot.

    Developers builds:
    Epinter: http://goo.im/devs/epinter
    DHacker: http://androidhosting.org/Devs/Dhacker29/


    An updated CMW recovery version is required, download:
    http://www.clockworkmod.com/rommanager/

    Gapps:
    http://wiki.cyanogenmod.org/w/Google_Apps


    2014-08-02
    Everyone with JellyBean firmware/bootloader should use moto_msm8960_jbbl builds. Users who updated to KitKat firmware/bootloader need to use the moto_msm8960 builds.

    2014-07-07
    The ROM is being updated to kernel version 3.4, that was already released to RazrM and for XT926. The kernel 3.4 depends on new bootloader version and XT925 doesn't have it yet (a leak exists, you can search xda).

    As Nadlabak and dhacker29 already informed, the M8 will be the last release supporting devices with JB bootloader. All nightly builds will support only new bootloader.
    Click to expand...
    Click to collapse

    Sources:
    https://github.com/razrqcom-dev-team
    https://github.com/CyanogenMod
    View
    37
    epinter
    epinter
    Hi,

    Is not everyone who can use cm11 based on the new kernel, so I will build with old kernel that supports JB bootloader, so you can stay up-to-date while the bootloader is not updated.

    https://goo.im/devs/epinter/cm-11-20140708-NIGHTLY-moto_msm8960-epinter.zip
    View
    21
    kabaldan
    kabaldan
    I've finally pushed the commit to enable HDR in CM camera (and other generic camera apps) for both jbbl and kkbl builds:
    http://review.cyanogenmod.org/75212
    together with a change needed for it in kkbl builds:
    http://review.cyanogenmod.org/75213

    Both HDR and ZSL (zero shutter lag - default since the last cam related commits) modes seem to work fine on my devices (kkbl xt925 and jbbl xt897).
    Feedback will be welcome (as in the case of flash enable>shot>flash disable>shot killing JB cam in ZSL mode that I completely missed the last time - https://jira.cyanogenmod.org/browse/CYAN-5583 )

    An unfortunate side-effect of this change is that the HDR mode will stop working correctly in Motorola specific camera apps.
    Unless I'll find a way how to detect (in camera wrapper) that a Motorola cam app is being used...

    As I'm currently focused on getting the cam working right specifically in CM camera app, I'm ready to merge it despite its breaking of Motorola cam apps at this point.
    View
    18
    epinter
    epinter
    Everyone with JellyBean firmware/bootloader should use moto_msm8960_jbbl builds. Users who updated to KitKat firmware/bootloader need to use the moto_msm8960 builds. Thanks to kabaldan for setting up the build.
    View
    18
    kabaldan
    kabaldan
    kabaldan said:
    It needs to be euro LTE xt925, because:
    1. there are BP crashes reported by european xt925 CM users (not happening on stock fw) that I want to look into
    2. there's no core developer with euro xt925 (David has xt926, Emerson has Latin American xt925)
    3. 3G coverage in CZ is the worst in Europe and it won't ever get better. Only the LTE coverage is being expanded by the mobile operators here now. So if I should get a new old device for whatever purpose, it should better be euro LTE capable, or I'll rather pass :)

    KK update for xt925 seem to be set in stone and released soon, so that aspect should be fine.

    Hopefully, there will be a 170€ xt925 deal done soon, so if you want to donate to this case, feel free to help. Íf not, no problem.

    Please note that I'm leaving for two weeks vacation with my children and wife and my internet connection will be very spotty, so please expect me to be rather non responsive during that time.
    Click to expand...
    Click to collapse

    Status update: I've received 129 USD on donations so far, so a part of the 170 EUR xt925 transaction has been covered by them.
    Thanks!
    The device should be on its way to me already.
    As soon as I return from holidays (+/- 10 days), I should be able to start debugging the moto_msm8960 builds (kk bl - hopefully the official xt925 kk release will happen in time).
    View

New posts