[ROM][CM-13.0][6.0] Temasek's UNOFFICIAL Builds

[akhilnarang]

temasek's UNOFFICIAL CM-13.0 BUILDS
UNOFFICIAL ROM THREAD

This is the unofficial thread for all current and future unofficial builds of CM-13.0 created by @temasek. Download links, changelogs and other important information can be found in post #2. Thank you.​

DISCLAIMER

/*
 * Your warranty is now void. 
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
 */

Foreward
CM13.0 require the latest bootloader.
This ROM supports each of Single Sim as well as Dual sim devices. This is untested on CDMA devices.

STOP!
If you do not read EACH and EVERY "OP" POST made by me and post rudely, report bugs incorrectly, or ask for ETAs/feature requests, you WILL be called out for it.
You have been warned. Most, if not, any information you may be looking for can be found either in this thread or by performing a simple search using good key words. Think before you post. Thank you.

Download Links and Changelog
FAQ and Trouble Shooting

The lastest version TWRP (2.8.6.0) or Philz CWM is recommended

A video review of the ROM, thanks to @sathish saju

Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.

Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the zip file from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.

@temasek for working so hard on this ROM.[/CENTER]

XDA:DevDB Information
Temasek CM13 unofficial builds, ROM for the Moto G

Contributors
akhilnarang
Source Code: github.com/temasek

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest bootloader
Based On: CyanogenMod

Version Information
Status: Alpha

Created 2015-12-06
Last Updated 2016-03-20

 

[akhilnarang]

Main Download (AndroidFileHost) [Click here]

Open GApps [6.0]


Flash this to enable root access
SuperSU

CM13 Build
Build Version: v1.4
Android Version: 6.0


For the most up to date changelog please visit:
Temasek’s CM13 Github Changelog
​

 

[akhilnarang]

Wifi shows on battery usage chart
1. Lollipop and prior versions of android, "Allow wifi scanning" option was in advanced wifi but now moved to "Location" settings under scanning option (top right corner)
2. Turn off "Allow wifi scanning" to remove the issue.

Help! Miscellaneous is draining my battery!
Miscellaneous itself is not some mystical process that drains battery. It's showing the difference between estimated battery drain and actual battery drain (so more like a summation of all of the miscellaneous processes that drained the battery unexpectedly).

Work In Progress. Will be updated as comments are added.

When reporting a bug, Please Include:
- Your device variant and model number.
- Your bootloader version, baseband, etc.
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel/Build, etc.).

Please read all of the OP before you post. Do not report issues on previous builds only on the latest.​

 

[sathish saju]

U personally flashed SuperSU ?..because in latest nightlies SuperSU gives bootloop.
Inbuilt cm root works without any issues

Sent from my Moto G

 

[Aayushya]

U personally flashed SuperSU ?..because in latest nightlies SuperSU gives bootloop.
Inbuilt cm root works without any issues

Sent from my Moto G

I did flash 2.52, no problems at all. Although I'd like to state that first I let the ROM boot, enabled root, and then flashed supersu

 

[soumitpl48]

Request for Mirrors

Hi, tried to download from Renderserver many times, but the d/l fails always. Can you please provide any other mirror, AFH for example? Thanks.

 

[sathish saju]

I did flash 2.52, no problems at all. Although I'd like to state that first I let the ROM boot, enabled root, and then flashed supersu

?

Sent from my Moto G

 

[Aayushya]

Hi, tried to download from Renderserver many times, but the d/l fails always. Can you please provide any other mirror, AFH for example? Thanks.

Done, removed renderserver link, it was slow for me as well.

 

[mangesh511]

Is WiFi working properly ?
Its not working for me on other Rom.
Thanks

 

[sathish saju]

Is WiFi working properly ?
Its not working for me on other Rom.
Thanks

Working

Sent from my Moto G

 

[mangesh511]

Working

Sent from my Moto G

wifi is not connecting .this issue i faced on cyanpop/candy rom too.
do i need to do anything for wifi.

 

[TheRoyalSeeker]

What is permissions fix?

 

[ysop]

wifi is not connecting .this issue i faced on cyanpop/candy rom too.
do i need to do anything for wifi.

If your can't connect to WPA2 Enterprise WiFi(need id and password,not only need password) after update to 6.0,
see the link:http://forum.xda-developers.com/goog...3#post63300413
go to \data\misc\wifi\ and edit wpa_supplicant.conf,add this line to your eduroam or wpa-eap network:
phase1="tls_disable_tlsv1_2=1"
I can connect by this way.

 

[mangesh511]

Working

Sent from my Moto G

If your can't connect to WPA2 Enterprise WiFi(need id and password,not only need password) after update to 6.0,
see the link:http://forum.xda-developers.com/goog...3#post63300413
go to \data\misc\wifi\ and edit wpa_supplicant.conf,add this line to your eduroam or wpa-eap network:
phase1="tls_disable_tlsv1_2=1"
I can connect by this way.

thanks @ysop.will try this.
so this is known bug.

 

[Rocketval]

Falcon xt1032, latest Hurtsky kernel, dialer v. 5.1.1_25 , all authorizations given, baseband MSM8626BP_1032.390.81.01P, pico open gapps.

I'm facing dialer fc, calls start and I can hear them and talk but no notification of incoming calls too. Anybody know hot to solve this? I can provide logcat too.

EDIT: Upgraded radio to 3116.98.00R but still no results.

EDIT2: Re-cleaned and re-flashed everything, dialer fc still there.

 

[fr3quency]

Hello everyone. This is my 2nd post in these forums(the first one being in the Q&A section). I've searched for a ROM with Android 6 for the xt1033 (Dual Sim) for my gf and I have chosen this. It seems the less bloated(compared to CyanPop) and also such a thread exists for the Nexus 4(I have no idea who Temasek is xD but I believe the ROM will be great from what I heard on the Nexus 4 forum)

Anyway, I was a good boy and read the OP and everything that I was supposed to read.
The thing is, I didn't find a post that explains the 'bugs' that exist.
Does Camera work(both front and back)? Does video work? Does 3G work? It's not for me, but for my gf and I don't want to fk her phone up as it's not mine.

Thanks a lot for your time.

 

[soumitpl48]

Hello everyone. This is my 2nd post in these forums(the first one being in the Q&A section). I've searched for a ROM with Android 6 for the xt1033 (Dual Sim) for my gf and I have chosen this. It seems the less bloated(compared to CyanPop) and also such a thread exists for the Nexus 4(I have no idea who Temasek is xD but I believe the ROM will be great from what I heard on the Nexus 4 forum)

Anyway, I was a good boy and read the OP and everything that I was supposed to read.
The thing is, I didn't find a post that explains the 'bugs' that exist.
Does Camera work(both front and back)? Does video work? Does 3G work? It's not for me, but for my gf and I don't want to fk her phone up as it's not mine.

Thanks a lot for your time.

To be honest, this Rom is even more stable than official CM nightlies in my opinion. Camera, Dual sim, everything's smooth AF. Running it as a daily driver, no issues yet, just remember to grant proper permissions to apps.

Oh, and you might want to first use the inbuilt root app, before flashing supersu, just in case.

 

[TheRoyalSeeker]

No system ui tuner in settings??

 

[Jevinruv]

Falcon xt1032, latest Hurtsky kernel, dialer v. 5.1.1_25 , all authorizations given, baseband MSM8626BP_1032.390.81.01P, pico open gapps.

I'm facing dialer fc, calls start and I can hear them and talk but no notification of incoming calls too. Anybody know hot to solve this? I can provide logcat too.

EDIT: Upgraded radio to 3116.98.00R but still no results.

EDIT2: Re-cleaned and re-flashed everything, dialer fc still there.

Yeah same here , dialer FCs

 

[jt1998]

Is there Bluetooth stuttering in this rom like other CM 13 ROM's? Just asking before flashing. Thanks in advance!

Sent from my SM-G900T using Tapatalk