[ROM]CM10 4.1.2 SuperLite for Atrix 4g! [Wifi Tether Fix + Fastboot, 28 Sep 2014]

[jhonnyx]

ROM: http://www.gdriveurl.com/?idl=313740212393&out=1

Kernel: http://www.gdriveurl.com/?idl=913740214280&out=1

Flash the ROM then flash the kernel.

Ok, I'll do the frankestein move . I'll post back if it boots with the Sendust's work

 

[atrix4g18]

Yes, I can do that. In fact; thats what I did with the latest kernel released, just to test some stuff.

Okay, I hope this doesn't confuse you too much:

Above I have posted the ROM and Kernel. That kernel zip works fine, however there is a newer one.

Unfortunately the new one is only for CM10.1, but here is how that will change:

• Download this file "Kernel-Stuff.zip" here: http://www.gdriveurl.com/?idl=413740218374&out=1
• Extract the contents of the zip file.
• Go to the CM10.1 folder
• Extract the zImage from the boot.img inside the CM10.1 folder
• Now go to the CM10 folder
• Extract the ramdisk from the boot.img inside the CM10 folder
• Now use the zImage from the CM10.1 and the ramdisk from the CM10 and make a new boot.img
• Finally, send me the boot.img you have created

If all goes well I will post an updated kernel zip 5 minutes later.

 

[jhonnyx]

Okay, I hope this doesn't confuse you too much:

Above I have posted the ROM and Kernel. That kernel zip works fine, however there is a newer one.

Unfortunately the new one is only for CM10.1, but here is how that will change:

• Download this file "Kernel-Stuff.zip" here: http://www.gdriveurl.com/?idl=413740218374&out=1
• Extract the contents of the zip file.
• Go to the CM10.1 folder
• Extract the zImage from the boot.img inside the CM10.1 folder
• Now go to the CM10 folder
• Extract the ramdisk from the boot.img inside the CM10 folder
• Now use the zImage from the CM10.1 and the ramdisk from the CM10 and make a new boot.img
• Finally, send me the boot.img you have created

If all goes well I will post an updated kernel zip 5 minutes later.

That was exactly what I was doing

I think we should create a group to learn about this tidbits we learn little by little in the search of a better kernel compilation, haha

 

[atrix4g18]

That was exactly what I was doing

I think we should create a group to learn about this tidbits we learn little by little in the search of a better kernel compilation, haha

Where are you stuck? If only I had my Ubuntu machine..

Be specific if you can

 

[jhonnyx]

Where are you stuck? If only I had my Ubuntu machine..

Be specific if you can

I'm not stuck atm
I'm doing a little test before trying what you've suggested

I'm getting the ramdisk and stuff from your CM10 image merged with a late compilation of a CM9 kernel from a time ago.

 

[atrix4g18]

I'm not stuck atm
I'm doing a little test before trying what you've suggested

I'm getting the ramdisk and stuff from your CM10 image merged with a late compilation of a CM9 kernel from a time ago.

I have absolutely no idea what you mean by that. Good luck though.

 

[sendust7]

I'm not stuck atm
I'm doing a little test before trying what you've suggested

I'm getting the ramdisk and stuff from your CM10 image merged with a late compilation of a CM9 kernel from a time ago.

Guys, can you start another thread or do PM? This thread is about SuperLite.

Thanks
sendust7

 

[jhonnyx]

Dear Sendust, will do. Sorry for the inconveinence. If we get the kernel working for your work, can we publish it here?

 

[atrix4g18]

Guys, can you start another thread or do PM? This thread is about SuperLite.

Thanks
sendust7

Yeah we will switch to pm. Can you make a superlite out of the CM10 I posted? I think you build from source but can you still replace files etc while keeping the new kernel related stuff the same?

 

[sendust7]

Yeah we will switch to pm. Can you make a superlite out of the CM10 I posted? I think you build from source but can you still replace files etc while keeping the new kernel related stuff the same?

I'll see what I can do I'm kind of busy this week.

 

[patolin_01]

Hello

I just installed this firmware and its great! My atrix works just like new

I just have one question. Does anybody have the wifi thetering working? I cant enable on mine.

 

[teerypark]

sensational rom!

Had issues with poor battery life - removed holo locker and now all good....?
Anyway no apparentl loss of features on lock screen

Only "complaint" is google play and My Tracks often lockup/unresponsive.

previously neutrino rom but had issues with youtube and other apps for android 4+ only not working

 

[trujap]

Hi,

I was wondering if this ROM works with the laptop dock?

thanks

 

[CyberpunkShadow]

Hi,

I was wondering if this ROM works with the laptop dock?

thanks

It's CM based...

Sent from my MB860 using xda app-developers app

 

[jman316]

does the camera work?
can i flash without wiping?

 

[andresrivas]

does the camera work?
can i flash without wiping?

1) Not sure what you are asking here, but AFAIK, this rom can take pictures
2) only in two cases: when you are upgrading the same rom or want to have a LOT of troubles

 

[jman316]

how light is this compared to other CM10 , 4.1's?

 

[palmbeach05]

how light is this compared to other CM10 , 4.1's?

Typically trying a ROM out will not cause aliens to invade and destroy the Earth, so why not give it a shot instead of asking questions?

 

[andresrivas]

how light is this compared to other CM10 , 4.1's?

Mine dropped a few pounds, we are getting ready for the summer here!

Read the first post. The things that list as removed should get you an idea

 

[Tushcool]

Currently on Cyanogen 2.3.7 rooted. Bought cell from friend which has written Singapore ver. Not AtnT , Bootloader is unlocked , My que is i want to install this rom. But does not want issue of sim relocking.. will this happen ?